Shop our Airplanes Products Drone Products Sales
Thread Tools
Old Aug 04, 2007, 11:43 PM
misfitsailor is offline
Find More Posts by misfitsailor
floating and flying
misfitsailor's Avatar
Discussion

Best R/C setup for peanut scale?


what's the hot setup to convert the average Peanut scale airplane to R/C? What equipment, power, ect. Can I use one of the new tiny servos instead of actuators? Are there combos out there that would include most of the things I would need? Can it be done on single cell lipo power?

Any help is welcome!
Sign up now
to remove ads between posts
Old Aug 05, 2007, 06:44 AM
epilot is offline
Find More Posts by epilot
Only nerd in the village
Provided the fuselage has room for a 26x23mm receiver the Kyosho Cessna is the ideal doner for Peanut equipment. Otherwise the Plantraco starter set or Micro Invent will fit.

IR is another possibility but a bit more DIY is involved.

Michael
Old Aug 05, 2007, 10:41 AM
Tim Wolff is offline
Find More Posts by Tim Wolff
Gravity is a harsh mistress.
Tim Wolff's Avatar
Here's a few RTF. Just the radio gear and power setup can be had there too.
http://www.airmidimicros.com/AMMRTFPlanesPT.htm


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion R/C Systems for Scale Boats E-Challenged Dock Talk 16 Feb 24, 2007 04:30 PM
Best R/C jet flight sims for PC Marty C. Fuel Jet Talk 28 Jan 30, 2005 11:49 AM
Best Sub C cell for 45 amp static draw? rparigoris Power Systems 3 Nov 26, 2001 12:23 PM
CSM v10 3-in-1 R/C Sim for PC BioHazard Aircraft - Electric - Airplanes (FS/W) 0 Oct 29, 2001 01:48 PM