depron 747 - RC Groups
Thread Tools
Jul 26, 2007, 06:35 PM
RC Airliner Man
brett1984's Avatar
Build Log

depron 747

was reading through all the threads to do with airliners and i came across a small 747 powered by 4 gws direct drive props, it had a link to the site where the builder had it cnc cut. the link is-, (on the site is the link to get the cnc files if you do have a cnc cuter)

but as many people i dont have a link to get the parts cnc cut, so i used the plan that was with the cnc cut files, i had to enlarge the plan big enough to build off but i have started the build now- pics will follow
Attached Thumbnails
14.5 KB - Views: 7
21.2 KB - Views: 15
10.1 KB - Views: 5
Sign up now
to remove ads between posts
Jul 26, 2007, 06:39 PM
RC Airliner Man
brett1984's Avatar


heres the fuselage bieng built in 2 halfs, the fuselage is roughly 86cm long, and the wing span 80cm- ish
Jul 26, 2007, 06:39 PM
RC Airliner Man
brett1984's Avatar


my model willl be made of depron, please let me no if anyone is intreseted in the 747 i will be glad to share the plan but you will have to cut and stick it together your self, i will be gratefull of any input and glad to help you if you need it, i will post the plane when i have marked all the formers with the correct numbers
Jul 26, 2007, 06:43 PM
RC Airliner Man
brett1984's Avatar

shock flyer

it is almost the same size as a shock flyer
Jul 26, 2007, 07:05 PM
Registered User
Frank Rys's Avatar
I would be interested in plans, looks like a fun project...
Jul 26, 2007, 07:28 PM
Registered User
These have always been my favorite models and the only true micro airliners.
The slow speed of these just make them look so real...

Will you be using the same GWS power setup? And I ran across a site that sells the GWS 30mm fans without motors of course, in case you are interested in making this a EDF airilner

Cant wait to see more of your project...

Jul 27, 2007, 02:04 AM
Registered User
mesnick's Avatar
bratty984,,very nice work!!!!

Jul 27, 2007, 02:53 AM
Registered User
What ???

Plans for a so great plane and you ask for interest ????
Yes, yes, yes, Yes, yes, yes, Yes, yes, yes, Yes, yes, yes.
Great, great, great, great, Great, great, great, great, great.

P l e a s e PPPPPPPlllllllaaaaaaannnnnnnssssss.

Good Luck to you and your great birdy!

Jul 27, 2007, 11:04 AM
RC Airliner Man
brett1984's Avatar


i went to my local model store, they didnt have any white depron so i had to have gray , so the fuz will be out of white depron, and the wings will be gray
Last edited by brett1984; Jul 27, 2007 at 11:16 AM.
Jul 27, 2007, 12:07 PM
RC Airliner Man
brett1984's Avatar


needs sanding to shape
Jul 27, 2007, 01:16 PM
RC Airliner Man
brett1984's Avatar


these are the plans i am working from please look at the drawings you will have to cut and stick them to gether to get the right size,.....
Jul 27, 2007, 03:52 PM
Depron Panda
Ronys's Avatar
Keep up the good work.

It looks great!!
Jul 27, 2007, 04:28 PM
Registered User

Thanks for the plans.
And lets have a look at your great building

Jul 27, 2007, 04:57 PM
RC Airliner Man
brett1984's Avatar

thank you all for your comments

few more build pictures....
Jul 28, 2007, 01:34 AM
Depron Panda
Ronys's Avatar
Looking good.

What is the width of the depron ?(3mm or 6mm)

What is the width of the stripes you used for the round areas?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log depron 747 brett1984 Foamy EDFs 11 Jul 27, 2007 12:10 PM
EDF Depron 747 Power Suggestions cward8 Electric Ducted Fan Jet Talk 4 Dec 17, 2004 10:03 AM