building session (9th) help - RC Groups
Thread Tools
Nov 06, 2002, 06:37 PM
Schumacher USA

building session (9th) help


I'm putting the final touches on my Goldberg SuperChipmunk and need help w/the motor mounting.

Mega 45 DD

Anyone have an old/extra mount I could buy that would fit?

I haven't finalized the firewall yet, so I'm open to any possibilities.

Thanks, see ya Saturday,
Shawn
Sign up now
to remove ads between posts
Nov 08, 2002, 12:23 PM
Registered User
I'll bring the duct tape if you bring the bailing wire. ;-)
Nov 08, 2002, 01:07 PM
Schumacher USA
Cool! We'll get Jim to spit on it for us, and it'll be done!

Shawn
Nov 08, 2002, 05:56 PM
York Electronics
Gary Warner's Avatar
What size mount does this motor need? I might have something.
Nov 08, 2002, 06:38 PM
Schumacher USA
anything that will fit a Jeti 45, or Mega 45.

Thanks Gary,
Shawn

Beer Bratwust anyone?
Nov 08, 2002, 10:09 PM
York Electronics
Gary Warner's Avatar
I don't know what size these are - I don't have them. I do have alot of 05 sized mounts. Will this help?
Nov 09, 2002, 12:43 AM
Schumacher USA
Yes I think so!

They are longer type speed 600 size or so....

Shawn
Nov 09, 2002, 10:32 AM
York Electronics
Gary Warner's Avatar
I'll bring what I got. Also, tonight we'll cut the foam blanks that go to the Cherokee. The fuselage plug has hit a bit of a snag. I never did check the compatibility if the primer with the WBPU - it's a no-go. It looks as though I will have to glass the plug first to get a surface that will take the primer <sigh>. There goes another month of spare evenings.