wild hawk duct taped? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 23, 2007, 11:35 AM
Registered User

wild hawk duct taped?

hello again,

this post is concerning my harbor freight wild hawk. as stated in previous posts, i am using it as a trainer. also, as stated, i have really banged it up.

anyway, i used chrome duct tape instead of packing tape because thats what i had on hand. most of the nose is covered in duct tape (and glue of course). i used a total of around 2 feet of duct tape, which doesn't weight much more than packing tape. i haven't flown it since i taped it up. should i put weight in the back to balance the plane? if so, what should i use?

the cg seems to be almost in the same place as it was before.

thanks for any help!
Sign up now
to remove ads between posts
Jun 23, 2007, 01:52 PM
Oldie but goodie
Popsflyer's Avatar
How much difference is "the CG is almost in the same place"?

An 1/8" either way (off from the factory CG) will most likely make little difference. More than that, and I would remove the duct tape and RE-repair your plane with some proper Foam safe adhesive.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Harbor Freight Wild Hawk flight report adar Parkflyers 16 Nov 21, 2009 09:41 AM
Discussion wild hawk/easy star CG realllybeginner Beginner Training Area (Aircraft-Electric) 10 Sep 02, 2009 11:23 PM
Question Iofo on "Wild Hawk" by Harbor Freight realllybeginner Electric Plane Talk 17 Jul 04, 2009 07:03 PM
Discussion Advice on the wild hawk? OV101 Enterprise Beginner Training Area (Aircraft-Electric) 3 Jul 14, 2007 12:10 AM
Discussion HF's wild hawk mods? barlowe Parkflyers 12 Jun 20, 2007 08:59 PM