How are the DX7s working with the Trex? - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Jun 15, 2007, 07:54 PM
Registered User
Discussion

How are the DX7s working with the Trex?


I have been reading about all kinds of problems with the Sprectrum DX7 systems. It seems that most of the issues are coming from plankers. How about you heli pilots. Is the DX7 working for the standard Trex setup. How many crash and burns? No problems? Love em? Hate em? Let us hear.
Sign up now
to remove ads between posts
Jun 15, 2007, 07:57 PM
Registered User
ukgroucho's Avatar
No problems.. what problems do you believe you are reading abot - LINKS?
Jun 15, 2007, 08:06 PM
Registered User
I have heard issues with under voltage cutouts. Receiver loosing sync with radio. Uncommanded servo moves. However this may all be attributed to the DX7 system, but a problem may lay elsewhere in the electronics.
Jun 15, 2007, 09:56 PM
=>] Smack 3D Head [<=
HeliSmith's Avatar
I have had mine setup for only a week. But before that I have had my 36 setup on the DX7 / AR7000 for over 2 months now I guess. I have had no issues and I am very happy.

P.S. That's one week and about 80 flights. I am a have addict!
Jun 15, 2007, 10:11 PM
Rcer field rep.
haven't heard of any problems with the radio itself... only with the older ar6100 receivers.
Jun 15, 2007, 10:18 PM
Registered User
Under voltage is real, but easy to fix (uprate your BEC). Early AR6100s had an uncommanded servo move problem, now fixed in firmware. There is a way the transmitter can fail that results in uncommanded movements, that's faulty equipment, which of course can do anything.

A heli pilot is never going to have range issues, but bigger (read 500 and 600 class) helis might have shadowing issues; this is fixed by using an AR6200 at least in that class of heli.

Other than those things, all of which are fairly easily fixed or very rare, it's a great heli radio, probably only exceeded by other 2.4GHz systems that aren't out yet.
Jun 15, 2007, 10:20 PM
Everyone crashes sometime
quickster47's Avatar
I run the DX-7 on my Hurricane EP550, TRex 450SE V2, Falcon 3D and several other helis and have absolutely no problems whatsoever. And I pretty much have most all configurations covered and nothing in the radio or receivers has given me any problems. Great system with great support.

Perhaps you have been fed bad info by someone who is anti 2.4GHz and anti Spektrum.

Carl
Jun 15, 2007, 10:33 PM
Registered User
I was just surfing around the various forums looking at all the info out there. The problem is, those that are having no problems normally dont post. I have a Futaba CH7 now. I also put a dimension engineering BEC into my setup which consist of the stock Align ESC and 430L. Both of which I have had no problems in one year of use, and one hard crash. I would think the BEC should protect against any under voltage problems.
Jun 15, 2007, 10:52 PM
Trexazoid
Have you heard that 1 unsatisfied customer will tell on average 11 people of their bad experience and 1 customer that had a good experience will tell only 1 or possibly 2 people?

Did you find any of the posts where the question was asked what is the best tx? Or should I get a DX6 or DX7? A lot of those posts have plenty of responses about how people love them. Even the posts that have bad experiences have posts in them saying how to fix it once it was determined if it was a known problem (e.g. the firmware issue).
Jun 15, 2007, 11:13 PM
=>] Smack 3D Head [<=
HeliSmith's Avatar
I looked at the Futaba system and the DX7 system very long and hard. I went with the DX7 because of the amount of good press behind it. The AR6100 did have a problem which was rememdied.

I run a Dimension Engineering SportBEC as well. Great BEC!

HS
Jun 15, 2007, 11:30 PM
Registered User
I had about 100 flights with no issue and yes my 6100 is updated look at my heli now I will never use 6100 ever I lost servo control or a lockout only 2mins in flight all my heli will only have 7000
Jun 15, 2007, 11:52 PM
#include <crashkit.h>
fadetoblack's Avatar
Quote:
Originally Posted by Andrew McGregor
Under voltage is real, but easy to fix (uprate your BEC). Early AR6100s had an uncommanded servo move problem, now fixed in firmware.
whats this issue you mentioned? i have ar6100s from dec 06 and early this year so im assuming those are early ones. do i have to send them in to get the firmware upgraded?
Jun 15, 2007, 11:57 PM
Registered User
Why would you need to update your bec under voltage would mean your pass your cut off point .
Jun 15, 2007, 11:57 PM
LOAD "FLIP-FPV",8,1
vic20owner's Avatar
ar7000 no problems so far... love my dx7 !!
Jun 16, 2007, 12:00 AM
Registered User
yup but there alot of issues with AR6100 All my helis will now have AR7100...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion How to play with a Trex catahuladave Mini Helis 0 Jul 02, 2007 08:17 PM
Discussion Why are all my joysticks not working with Reflex Xtr cobrapilot Simulators 6 Jan 04, 2006 12:37 AM
How I got my XRB SR working with my new Hitec Optic 6 transmitter. rc_lurker Coaxial Helicopters 12 May 24, 2005 03:29 PM
How are Orbit Pro charges doing with LiPos? mikeb33 Batteries and Chargers 14 Feb 08, 2004 08:12 AM