Got transmitter that cant even &# - RC Groups
Thread Tools
Jun 01, 2007, 06:39 PM
Registered User

Got transmitter that cant even &#

Futaba transmitter, no crystal, 4 channel. I was t old by my uncle that the Futaba transmitter will n ot work with the plane Im buying. Is this t rue? If tha tis could someone please find me a cheap transmitter for cheap? ebay ect ect...
Sign up now
to remove ads between posts
Jun 01, 2007, 06:43 PM
Frankenstein recycled packs
rampman's Avatar
Type normal and you will get more responses.
Jun 01, 2007, 06:45 PM
Wind blows
Laggard's Avatar
You need to do a little research on your own. Learn a bit about radios and then check out the fabulous for sale section of You can ask questions, but to ask people to find things for you is too much.
Jun 01, 2007, 06:46 PM
dusty bible = dirty life
Majortomski's Avatar
Without a chrystal, it won't work with ANY airplane you buy.

And unless the plane you intend on buying is prebuilt by some one and comes with a reciever it also won't work with what you buy.

If the plane is pre built and comes with a reciever then you have a 2/3 chance that the Futaba transmitter will work with what is in the plane IF you buy a chrystal for the transmitter, AND if you live in the US send it off to a repair center to be properly tuned.

Or by a complete ARF package with a Futaba radio and use what you have as a buddy box.
Jun 01, 2007, 08:38 PM
No Guts, No Glory
flyin C's Avatar
Call m-a-e and ask them in the Corona charger and recommended crystal, will work with your futaba radio. Just stick with one thread, just post your question and all of us will help you. I remembered that you will also need to get the micro antenna for the pico stick from M-A-E. your looking at $150 for everything except radio, and charger if you buy that complete package from mae that we were talking about.
Jun 06, 2007, 08:25 AM
Registered User
Well my uncle bought me a kit 2-3 days ago. With 5 servos. The plane is a foam type.. and it stinks te manual is in Chinese. I will need help (not reading chinese), cause some parts I have not seen before. I wil try to get a new transmitter, preferably on Ebay though. I would like one with a crystal for under $35 dollars, if possible. I will be returning to the US next tuesday. I will post pictures of the kit. I can tell that the servos will not last me a long time (cheap ones... 105YEN (around 3 bucks US). Uncle has same type and they shake alot. please help! thanks!
Jun 06, 2007, 08:54 AM
dusty bible = dirty life
Majortomski's Avatar
oscary, we'd realy like to help you but you aren't making a whole lot of sence.

And, you don't know what you are doing or what you have but you know it's junk.

Don't buy anything else from anywhere else until you can post some pictures of what you already have so we can see exactly what you need to get started properly.
Jun 06, 2007, 09:52 AM
Registered User
OK I will post pics within 7 days (dont have the camera in taiwan right now)
Jun 07, 2007, 01:53 PM
Registered User
If you want a good, no frills, inexpensive transmitter and receiver, go to the Horizon Hobby site and look at the replacement transmitters and receivers for their Typhoon 2. The transmitter is around $30 and the receiver is around $26.
Jun 07, 2007, 02:29 PM
Wind blows
Laggard's Avatar
BP Hobbies also has Art-Tech transmitters new for $30. The all you need is a $15 GWS pico receiver.