Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
This thread is privately moderated by kfong, who may elect to delete unwanted replies.
Old May 30, 2007, 03:17 PM
kfong is offline
Find More Posts by kfong
Registered User
Discussion

Useful links


Place holders for links I want to keep track of.

Ebike links:
My Ebkike Links
http://www.endless-sphere.com/forums...hp?f=3&t=21888

My ebike projects:
Motobecan 08 Fantom, cyclone 650watts and A123
http://endless-sphere.com/forums/vie...php?f=3&t=6348

Mongoose and cheap brushed Currie motor setup
http://endless-sphere.com/forums/vie...hp?f=6&t=11542

Outback Mountainboard Electrified A123
http://endless-sphere.com/forums/vie...p?f=12&t=11137

X-Treme Electric Scooter conversion to stand-up
http://endless-sphere.com/forums/vie...p?f=12&t=12031

Dewalt A123 BMS battery interface solution
http://endless-sphere.com/forums/vie...p?f=14&t=10986

Other ebike links:

Dual freewheels
http://www.endless-sphere.com/forums...p?f=28&t=13532
http://www.endless-sphere.com/forums...p?f=28&t=13862

Proportional regen
http://endless-sphere.com/forums/vie...php?f=2&t=9950

Sensored motor
http://endless-sphere.com/forums/vie...sored+rc+motor

Ebike using turnigy motors
http://www.hobbycity.com/hobbycity/f...ts.asp?TID=289

Cheap regen circuits
http://endless-sphere.com/forums/vie....php?f=2&t=583

Use the 1010B as a current calibration source
http://endless-sphere.com/forums/vie...183694#p183694
-----------------------------------------------------------------------
RC Links:

RC Radio Tx - Re-inventing the wheel! - PC based joystick
https://www.rcgroups.com/forums/show....php?t=1231017

Build KapteinKUKs Simple and Low Part Count Quad, Hex and Tricopter Flight Controller
https://www.rcgroups.com/forums/show....php?t=1143569

Arduino FPV
https://www.rcgroups.com/forums/show....php?t=1234310

USB Joystick to RC
https://www.rcgroups.com/forums/show....php?t=1167074

DIY Diversity antenna system
https://www.rcgroups.com/forums/show....php?t=1169075

Micro f16 composite thread, way cool.
https://www.rcgroups.com/forums/show....php?t=1027690

UFO
https://www.rcgroups.com/forums/show...hlight=compass

Scratch Building a 1/4 scale Bell 206B, 206L and 407
https://www.rcgroups.com/forums/show....php?t=1005164

Amazing VTOL F35b build
https://www.rcgroups.com/forums/show....php?t=1093705

Low cost DIY XBee/GPS plane locator
https://www.rcgroups.com/forums/showthread.php?t=993165

LP5DSM transmitter hack
https://www.rcgroups.com/forums/showthread.php?t=721024

Open source UAV
http://uavp.ch/moin
rc thread
https://www.rcgroups.com/forums/showthread.php?t=811550

Remzibi OSD
https://www.rcgroups.com/forums/show....php?t=1102975

Low cost DIY XBee/GPS plane locator
https://www.rcgroups.com/forums/show...5#post11491094

Another DIY 2.4 RC system
https://www.rcgroups.com/forums/showthread.php?t=971053

Small servo mods and avr code
https://www.rcgroups.com/forums/show...9#post11170886

Quadruino uav development
https://www.rcgroups.com/forums/showthread.php?t=885325

Nice commercial UAV board in development
https://www.rcgroups.com/forums/showthread.php?t=734456

Good composite resource thread with links.
https://www.rcgroups.com/forums/showthread.php?t=229462

A vtol design to try
https://www.rcgroups.com/forums/atta...mentid=1987832

Spruce Goose, simply amazing project. Gotta add a laser cutter to my CNC one day.
https://www.rcgroups.com/forums/showthread.php?t=699098

Neat, electro-mechanical bomb drop using an old servo
https://www.rcgroups.com/forums/showthread.php?t=899523

DIY AP plane with plans
https://www.rcgroups.com/forums/showthread.php?t=827488
Even simpler design
https://www.rcgroups.com/forums/showthread.php?t=881734

P38 GWS build, nice attempt at scale. Something I need to look at when I build mine.
https://www.rcgroups.com/forums/showthread.php?t=677943

Source for cheap servo connectors
https://www.rcgroups.com/forums/showthread.php?t=819509

Good B52 construction method using blue foam and hotwire
https://www.rcgroups.com/forums/showthread.php?t=571313

Nice EDF designed Bae Hawk
https://www.rcgroups.com/forums/showthread.php?t=727715

Just picked up a LP5DSM - hack for a 9C planned
https://www.rcgroups.com/forums/showthread.php?t=721024

Decals
https://www.rcgroups.com/forums/showthread.php?t=359029

Great monokote technique for decal work
https://www.rcgroups.com/forums/show...93#post9457541

Another low cost OSD display, diy co-pilot
https://www.rcgroups.com/forums/showthread.php?t=732783

Jet style OSD display
https://www.rcgroups.com/forums/showthread.php?t=837760

Nice use of vacuum formed plastic to create detail with stick and balsa style technique
https://www.rcgroups.com/forums/showthread.php?t=830970

Learning to do composites
https://www.rcgroups.com/forums/showthread.php?t=521523
https://www.rcgroups.com/forums/showthread.php?t=675381

Mini-HowTo - The Wet Seam
https://www.rcgroups.com/forums/showthread.php?t=653549

very small aerobatic indoor planes
https://www.rcgroups.com/forums/showthread.php?t=806218

DIY retracts
https://www.rcgroups.com/forums/show...ringe+retracts
https://www.rcgroups.com/forums/showthread.php?t=288179

DIY 2.4ghz system
https://www.rcgroups.com/forums/showthread.php?t=801036

DIY eCCPM mixer@flybarless heli
https://www.rcgroups.com/forums/showthread.php?t=624290
https://www.rcgroups.com/forums/show...14#post9184698

DIY Jet pilot figures for your planes
https://www.rcgroups.com/forums/showthread.php?t=73528
https://www.rcgroups.com/forums/showthread.php?t=79507

RF amps
https://www.rcgroups.com/forums/showthread.php?t=759494
http://www.rc-cam.com/forum/index.ph...opic=2194&st=0

900mhz all in one micro RC development
https://www.rcgroups.com/forums/show...92#post9044022

Wow, make incredibly small bl motors
https://www.rcgroups.com/forums/showthread.php?t=596219

DIY DLG
https://www.rcgroups.com/forums/showthread.php?t=688041

Another UAV thread to follow up on
https://www.rcgroups.com/forums/showthread.php?t=734791

Cool A123 thread on scooters and such.
https://www.rcgroups.com/forums/show...566256&page=82

Micro EDF motor
https://www.rcgroups.com/forums/show...eam+Losi+motor

DIY micro EDF motor
https://www.rcgroups.com/forums/showthread.php?t=168528

900mhz DIY system
https://www.rcgroups.com/forums/showthread.php?t=505175

New OSD chip from maxim
https://www.rcgroups.com/forums/showthread.php?t=778328

CustomCDR 16.5mm motors
https://www.rcgroups.com/forums/showthread.php?t=622774

Hall effect sensors and remagnetizing magnets
https://www.rcgroups.com/forums/showthread.php?t=307133

RC-USB Joystick
https://www.rcgroups.com/forums/showthread.php?t=508122

A123 cells
https://www.rcgroups.com/forums/showthread.php?t=626609

Baseload antenna calculator
http://kreature.dynu.com/calculators/baseload.htm

Current UAV project I'm working on.
http://www.rc-cam.com/forum/index.ph...opic=2031&st=0

Neat, will have to try to wind one. Small inrunner 7.5mm bl motor.
https://www.rcgroups.com/forums/showthread.php?t=168528

DIY 4 blade helicopters on my list of things to do
https://www.rcgroups.com/forums/showthread.php?t=716870
esc conversion
https://www.rcgroups.com/forums/showthread.php?t=766589

I have a couple of these motors, now I need to wind them for an edf.
https://www.rcgroups.com/forums/show...ghlight=ac+diy

Cool just picked up a spectrum dx6 for my 9CAP, more to follow
https://www.rcgroups.com/forums/showthread.php?t=540007
more 2.4ghz stuff
http://webx.dk/rc/uhf-link2/uhf-link2.htm
http://spektrumdx6.com/default.aspx

Corona actuator conversion
https://www.rcgroups.com/forums/showthread.php?t=576667

Flatbed printing
https://www.rcgroups.com/forums/showthread.php?t=691508

4 Channel PicooZ mod
https://www.rcgroups.com/forums/showthread.php?t=662454

Composite diy
https://www.rcgroups.com/forums/showthread.php?t=324367

Videos
composite build of an FB5 plane
http://video.google.com/videoplay?do...75476262&hl=en
Last edited by kfong; Mar 21, 2011 at 01:54 PM.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Gallery The useful links thread! tim hooper Vintage & Old-Timer Designs 94 Nov 27, 2016 10:54 AM
Gallery The "Useful Links for Scale Modellers" thread! tim hooper Scale Kit/Scratch Built 208 May 21, 2016 07:49 PM
Idea Control line- Useful links and freeplans Airboatflyingshp Control Line 3 Aug 02, 2006 05:19 PM