Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Aug 10, 2007, 09:08 PM
Tha Hodgehound is offline
Find More Posts by Tha Hodgehound
End of an Era.....
Tha Hodgehound's Avatar
Wimp! 101 here 100% humidity. We're still flying!
Sign up now
to remove ads between posts
Old Aug 10, 2007, 09:31 PM
Kruzer1 is offline
Find More Posts by Kruzer1
Nall-ified Pilot
Have not gotten to connecting push rods as yet,,, I mean to change the servo arm, thanks for the heads up though!
I've been out in 97 degree weather flying between drinking bottles of cool water.....
as you get older it does not get any easer.
Hodgehound 100% humidity? (Picturing Hodgehound flying with snorkel) heheheh
Old Aug 10, 2007, 09:39 PM
Tha Hodgehound is offline
Find More Posts by Tha Hodgehound
End of an Era.....
Tha Hodgehound's Avatar
ok 98% Walk outside and you sweat immediately. I gotta snorkel! Might take it tomorrow along with the facemask to keep the sweat outta my eyes! LOL
Old Aug 10, 2007, 10:15 PM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by hodgehound
ok 98% Walk outside and you sweat immediately. I gotta snorkel! Might take it tomorrow along with the facemask to keep the sweat outta my eyes! LOL
I have been keeping my flying time to the first and last 2 hours of the day.

Hay any word on Macs brother?
RCG Plus Member
Old Aug 10, 2007, 10:18 PM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by Tom Korn
August is building time in Central Fl. It's 96 degrees and 96% humidity.
Speaking of building, I thought you wanted a Micro SSX kit? They have been on the market with full instructions for over a month now. Got lots of combo packs also.
RCG Plus Member
Old Aug 10, 2007, 11:56 PM
Kruzer1 is offline
Find More Posts by Kruzer1
Nall-ified Pilot
Here's my tailwheel rig-a-ma-jig installed.
Old Aug 11, 2007, 05:10 PM
Tha Hodgehound is offline
Find More Posts by Tha Hodgehound
End of an Era.....
Tha Hodgehound's Avatar
Quote:
Originally Posted by jkarpy
I have been keeping my flying time to the first and last 2 hours of the day.

Hay any word on Macs brother?
He's doing better! But, he's still got a LONG road to recovery. They are supposed to do all remaining surgeries at the beginning of the week. They are pretty much keeping him under because of the pain. Mac said they wake him from time to time but he stays under pretty much 24/7. He's still in ICU but doing pretty good!
Old Aug 11, 2007, 09:01 PM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by hodgehound
He's doing better! But, he's still got a LONG road to recovery. They are supposed to do all remaining surgeries at the beginning of the week. They are pretty much keeping him under because of the pain. Mac said they wake him from time to time but he stays under pretty much 24/7. He's still in ICU but doing pretty good!
We were all shocked when we heard about the crash. I am glad he is doing well.
RCG Plus Member
Old Aug 12, 2007, 01:07 PM
Tom Korn is online now
Find More Posts by Tom Korn
Yes
I did pick up a kit a few weeks ago, thanks, it looks great!
Old Aug 12, 2007, 02:08 PM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by Tom Korn
I did pick up a kit a few weeks ago, thanks, it looks great!
Oh you must have bought it from Graves. Thanks!

Are going to post pictures?
RCG Plus Member
Old Aug 12, 2007, 06:09 PM
Tom Korn is online now
Find More Posts by Tom Korn
Yes
I have an SSX and a Micro SSX kit. I just finished a Micro Telemaster today, and have a Cobwebb II started and an Art Hobby Castor E ahead of the SSX's. The Castor is about 3/4's done, so hopefully it won't be long.

I am looking forward to the build. They are very nice kits, I probably better get extra's for a Rainy day.
Old Aug 12, 2007, 06:16 PM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by Tom Korn
I have an SSX and a Micro SSX kit. I just finished a Micro Telemaster today, and have a Cobwebb II started and an Art Hobby Castor E ahead of the SSX's. The Castor is about 3/4's done, so hopefully it won't be long.

I am looking forward to the build. They are very nice kits, I probably better get extra's for a Rainy day.
Have we met?
RCG Plus Member
Old Aug 13, 2007, 07:29 AM
Tom Korn is online now
Find More Posts by Tom Korn
Yes
I probably ran into you at SEFF last year. I picked up a set of X landing gear, and never did understand why it was removed from best new product voting.

I bought the SSX at Grave's because those evil employees said, "Hey, look at this!"
Old Aug 13, 2007, 09:34 AM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by Tom Korn
I probably ran into you at SEFF last year. I picked up a set of X landing gear, and never did understand why it was removed from best new product voting.

I bought the SSX at Grave's because those evil employees said, "Hey, look at this!"
For a few hours on Saturdays, I have been working behind the counter at graves. Stop in and say hello. I am there between Noon and 4:00PM.

I pulled the X-Gear from the competition at SEFF because I had 3 products entered. My votes were split. I should have pulled two and only kept one. I could not decide which one to keep.
RCG Plus Member
Old Aug 15, 2007, 06:11 PM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar

Applying The new Micro SSX ARF decals:


1. Cut excess material from decal before removing the backing.
2. Remove the protective backing to expose the adhesive.
3. Add about 3 drops of dish soap to 2 pints of clean water. Put it in
a spray bottle and spray the back of the decal.
4. Slide the decal into position and squeegee the excess water from under
the decal.
5. Allow the decal to dry overnight.
RCG Plus Member


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Micro Hydroplane Build Attemp thailandboy2 Racing Boats - Electric 29 Aug 25, 2015 11:31 AM
Micro speedwing build schoey Foamies (Kits) 46 Aug 08, 2005 11:22 AM
another Micro IFO build richw286 Parkflyers 19 Feb 24, 2005 12:05 PM
House of Balsa Micro Cub Build OCModels Parkflyers 52 Aug 29, 2003 11:47 PM
Micro-light Build Questiions DLC Parkflyers 5 Jun 22, 2001 03:17 PM