Shop our Airplanes Products Drone Products Sales
Thread Tools
May 26, 2007, 10:51 AM
.
Thread OP
Discussion

minicroco-project (25mm)


edited
Last edited by prinz; Nov 09, 2008 at 10:52 AM.
Sign up now
to remove ads between posts
May 27, 2007, 03:01 AM
Electric's are cool

Thanks Prinz


Sounds like state of the art , especially with Pontus around , wish I could read those foreign forums . I was highly impressed with your wirecut flux ring , soft iron Im guessing
May 27, 2007, 03:57 AM
.
Thread OP
edited
Last edited by prinz; Nov 09, 2008 at 10:53 AM.
May 27, 2007, 08:02 AM
Registered User
ueliisa's Avatar
projekt status and ability to make a reservationyou can find here:
- http://minicroco.ueliisa.net/

it is in german and with english translation

ueliisa
May 28, 2007, 11:33 AM
Registered User
landru's Avatar
The reservation form is easy to use -- even for English-only-speakers.

Andrew
Jun 02, 2007, 02:05 PM
veni,vidi, roto volubilis
Happy|Harry's Avatar
sweet i'm signed up! even if they only make the lams i could use them in my microdan bells

phil
Jun 02, 2007, 03:11 PM
Titanium Has My Back!!
9LIVES1968's Avatar
Roughly, how much will shipping be to the US? And how many at that price can be shipped? Thanks, Dave
Jun 03, 2007, 12:31 AM
Registered User
ueliisa's Avatar
Quote:
Originally Posted by 9LIVES1968
Roughly, how much will shipping be to the US? And how many at that price can be shipped? Thanks, Dave
Hello

first thanks for orthering from the other "universe"

I was only checking on www.deutschepost.de about international maxiletters
try here (hope it works) german only
https://www.deutschepost.de/dpag/mul...mlFile=1016932

so you can see an approximatly price to the world:
but please do not forget it is only the costs of the post office.

there will come the price for
- "registered mail"
- if you wish assurence

specially: we have some more costs during the projekt ordering, the parts shiping to one place (to make the postpaket-kit), paking material, ... and so on.
this cost we need to add with a not yet defined key to all how are ordering
- as you see up to 100g (would be possible for oner motor kit) is cheap.
- for more it could be easy for us and cheaper for you if some people how lives near together ordering in a collected packet here are steps up to 500g 8, 1000g 12, ...

ueliisa
Jun 03, 2007, 09:30 AM
Titanium Has My Back!!
9LIVES1968's Avatar
Thank you very much for the info. I will go back and chang mine to a definit then. Thanks again, Dave
Jun 05, 2007, 10:04 AM
Registered User
ueliisa's Avatar
the prices for the stator laminations and the turning parts are fixed now
others comming .... (soon)

turning parts for 4mm and 8mm stators costs 21.-- each

stator 0.25/pices it means about 6.25 for a 4mm and 12.50 for a 8mm motor

ueliisa
Last edited by ueliisa; Jun 05, 2007 at 10:14 AM.
Jun 07, 2007, 11:42 AM
veni,vidi, roto volubilis
Happy|Harry's Avatar
very reasonable costs ueliisa do you have a timeframe of how long the project will take?

prinz i think you should rename the thread to include "minicroco" in the title so people are more informed as to what motor these 18slot 25mm laminations are built into, as the larger 40mm croco project is well know here

phil
Jun 07, 2007, 11:55 AM
.
Thread OP
I have done it.
Last edited by prinz; Jun 13, 2007 at 09:15 AM.
Jun 07, 2007, 01:37 PM
Registered User
landru's Avatar
Hi Prinz,

Hopefully the change of thread title will spread the word about this very worthwhile project.

Do you have any photos you can add? A picture of the Minicrcoco's big brother, even, to give an impression of the high quality being offered.

I know in past threads, many RCGroup motor builders have expressed an interest in extending performance and efficiency limits for outrunners of the Minicroco sizes. Now here we have a wonderful opportunity to do just that. And you don't even need to be an expert machinist or even own a lathe to take advantage.

Thanks to all who are working to bring the Minicroco project to life.

Andrew
Last edited by landru; Jun 07, 2007 at 01:44 PM.
Jun 07, 2007, 02:40 PM
.
Thread OP
Okay.
Last edited by prinz; Jun 13, 2007 at 09:15 AM.
Jun 07, 2007, 04:13 PM
Registered User
ueliisa's Avatar
Quote:
Originally Posted by prinz
Okay landru. ...
about your problem better ask ueliisa.
I'am not a development-team-member.
But he is the "director of reservation" into the minicroco team.
hello
perhaps my english is to weak I do not understand the "problem"
I am read to try understanding ...

ueliisa

PS:
I am preparing the final order page and you can help. special if some of you are bi language and can help me to setup a better english to it
and some part are not translated yet.
http://minicroco.ueliisa.net/bestellForm_entwurf.php
but do not look to exact prices and parts - there coud be some changes in the future ... thanks


Quick Reply
Message:

Thread Tools