Shop our Airplanes Products Drone Products Sales
Jul 24, 2007, 12:59 PM
Mum is the word!
5000 4s is fine tim 6/4 apc sport on the demon.
The slice is thin ,hs 85's might work though for sinking them.ck
Quote:
Originally Posted by Pilot Tim Nunn
has anybody sank the control rods on a 40 slice. ck or anyone what prop to run on the 40 demon with 85 hv neu 1107 2775 kv motor on 5c and can i run it on 4c 5000 mah
Sign up now
to remove ads between posts
Jul 24, 2007, 01:44 PM
Registered User
Quote:
Originally Posted by klique
5000 4s is fine tim 6/4 apc sport on the demon.
The slice is thin ,hs 85's might work though for sinking them.ck
ck my motor mount is almost flush w the trailing edge ,so my elevons will be shorter ,how long do the need to be ,long as possible right,what prop for the slice mega 3 turn cc35 2 1320s i have always ran 4/75 ,4/75 apc
Jul 24, 2007, 02:32 PM
Mum is the word!
An apc 5.5/4.5 is the one of choice.
ck
Quote:
Originally Posted by Pilot Tim Nunn
ck my motor mount is almost flush w the trailing edge ,so my elevons will be shorter ,how long do the need to be ,long as possible right,what prop for the slice mega 3 turn cc35 2 1320s i have always ran 4/75 ,4/75 apc
Jul 31, 2007, 11:28 PM
Registered User
anyone flying a slice mines rtf any one found the sweet spot on cg
Jul 31, 2007, 11:39 PM
Mum is the word!
Hi tim maybe Start at seven and keep your rates low.
ck
Aug 01, 2007, 07:53 AM
Not your average DiggsyBear
Diggs's Avatar
Quote:
Originally Posted by Pilot Tim Nunn
anyone flying a slice mines rtf any one found the sweet spot on cg
Could you please provide a link for this?

Thanks,

Diggs
Aug 01, 2007, 09:52 AM
Owns an Evil Black Rifle
Twizter68's Avatar
One quick note on 3M 90, or any type of spray adhesive; using it in a well ventilated area is good, but you also need to use either a dust mask made for fiberglass or drywall sanding, or even better, a cartridge respirator with a particulate filter. This way you can avoid the "3M Flu" that comes from breathing in the particles of glue.
Aug 01, 2007, 10:30 PM
Registered User
hey diggs u r close to me r u flying tls
Aug 01, 2007, 10:43 PM
Registered User
ck do u run the cc35 advanced or what right now its set on medium but doesnt want to run on 3c right but hits great on 4c this in the slice any solutions
Aug 01, 2007, 10:43 PM
Not your average DiggsyBear
Diggs's Avatar
Not yet... I am currently working my way up to them. I have a couple of stryker Cs, a pair of unbuilt multiplex Twin Jets, and just bought a Multiplex funjet that should break 100. I really want to fly a TL, but don't think I am ready, and not sure if I can do the build on it. Only been doing RC since Dec of 06, and spent half that time fighting (not flying) helis. The glassing process has kept me at bay so far, but I am sure I will do one in the future. The little stryker, while not all that fast, is much faster than anything else i fly. The speed hook has been set and I am being reeled in. Something about that low fast pass and the sound of the motor.

Diggs
Aug 01, 2007, 10:57 PM
Registered User
i know w u mean the glass job is the easy part for me anyway i will be in ur area middle of the month rdrc toys for tots fly in i have a 50, 40, slice,and a striker that hits around 110 on 4c
Aug 01, 2007, 11:04 PM
Not your average DiggsyBear
Diggs's Avatar
I will be at the RDRC flyin for tots also... Hope to see you there. I noticed a lot of wings there from last years pics. I am stoked!!

Where did you get the slice?

Diggs
Aug 01, 2007, 11:09 PM
resU deretsigeR
PaulVi's Avatar
Quote:
Originally Posted by Twizter68
"3M Flu"
Hey CK thats what you started... HAHAHA It spread from AZ to all points north and east

Do you feel bad?
Aug 01, 2007, 11:11 PM
resU deretsigeR
PaulVi's Avatar
Quote:
Originally Posted by DiggyDiggs
The glassing process has kept me at bay so far,

Diggs
Dont let that stop you it is fairly simple and hard to make a real mistake..


Flying at 120 to 140 on the other hand takes some time to get used to it..


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
I got some Fan Fold what to build thread part II started by emoone!!! Don Sims Foamies (Kits) 188 Jan 23, 2010 08:28 PM
Build Log RiteWing 48-FT build thread theclaw Slope 46 Dec 09, 2007 08:53 AM
Mountain Models Tantrum Partial Build Thread.. Tram Parkflyers 142 Apr 03, 2004 10:41 PM
My Bobolink Build Thread (very Colibri like) Jim Poor Hand Launch 65 Dec 10, 2003 04:48 PM
Switchback re-build thread (or What the $#*& was that!) Biggles604 Parkflyers 17 Jun 23, 2003 09:34 PM