Dumas Bonanza Model 35, kit# 318. - RC Groups
Thread Tools
Oct 20, 2002, 11:44 PM
Registered User

Dumas Bonanza Model 35, kit# 318.

I plan to build the Dumas Bonanza Model 35, kit# 318 as an electric RC with six (6) channel control - Yes, six! Four channels for the tail and wing surfaces, plus micro retracts and throttle. And, yes, I am using a computer radio to do this.

Before I begin construction I thought I'd toss this ambitious plan out here for some feedback. So please share your comments and suggestions.


Sign up now
to remove ads between posts
Oct 21, 2002, 12:10 AM
ὅπερ ἔδει δεῖξαι
Gerald's Avatar
You sound rather sure of yourself. I guess you must know what you are doing then. What kind of comments are you looking for? I guess all I would say is that if you are a very skilled modeller then you might just pull it off. If you are a beginner then god help you because it certainly will be a challenge.
Oct 21, 2002, 10:57 PM
Registered User

I'm looking for a challenge and as you observed, this should be it.

What kind of comments am I looking for, you ask? I'm not going to say because that would taint the comments I might get. I'm glad you took the time to share your opinion about my ambitions, and because yours is the only comment posted so far, then that makes it also the best comment I have - Thanks!

Oct 22, 2002, 01:46 AM
Happy happy, joy joy!
Goge's Avatar

OK I'll bite

Some might consider that choice of username in poor taste...

But anyway the Dumas kits are very nice. I don't have the Bonanza, but I built a Mr. Mulligan that came out great. I powered it with a GWS drive and LiPolys, I don't think that would work for your project though. I went for as light as I could get. If you can get 5 HS-50s (lightest "normal" servo I can think of), then you're going to have a pretty high wingloading.

The Bonanza is about the same wingspan. You'll have to do some beefing up of the structure if you're going to fly it with a stronger motor (and beefier batteries). It would need to scoot to stay airborne.

Sounds fun though... let us know how it turns out.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Dumas Bonanza Model 35, kit# 318. Crash-N-Burn Scale Kit/Scratch Built 0 Oct 19, 2002 05:08 PM