Thread Tools
Old Jun 28, 2007, 04:57 AM
tomcor is offline
Find More Posts by tomcor
Battery Powered==(*)==
tomcor's Avatar
I glued 2 pieces together with Household Welder Glue, which I used on the whole plane.

Front of plane
_____________________


______________________


______________________

Back of plane

We are working on plans now also.

I am using a 8X4 gws HD prop on 3-cell 680 cells. Komodo 22/04/17

Here's a link for more videos of the Cutlass.

http://www.youtube.com/user/tomcor33
Last edited by tomcor; Jun 28, 2007 at 05:07 AM.
Sign up now
to remove ads between posts
Old Jun 28, 2007, 02:57 PM
IFO FLYER is offline
Find More Posts by IFO FLYER
Registered User
IFO FLYER's Avatar
I will wait for the plans before I try to build one.
Old Jul 04, 2007, 12:43 PM
dekan is offline
Find More Posts by dekan
D'oh.. Dumb Left Thumb
dekan's Avatar
Hows the plan coming?
Old Jul 09, 2007, 03:15 PM
JimW is offline
Find More Posts by JimW
Registered User
Hello, anybody there?

Any developments?
Old Jul 10, 2007, 07:27 AM
gpw is offline
gpw
Find More Posts by gpw
gpw
“There’s no place like Foam”
gpw's Avatar
No Plans yet ???
Old Jul 10, 2007, 08:24 AM
firetrappe is offline
Find More Posts by firetrappe
Build 2 Bounce!
Sorry for the delays guys, plans were finished over a week ago and sent to Tomcor to check the dimensions. I've not had any feedback yet (he's not been on RCG since) which is why the plans haven't been posted.

I'll post the plans later today and revise them later if necessary.

FT
Old Jul 10, 2007, 03:56 PM
firetrappe is offline
Find More Posts by firetrappe
Build 2 Bounce!

Plans


Ok folks, here are the plans....

They should make sense if you look at the pictures in the first post. The red lines on the plans can be used to make spray-masks if you like the original paint scheme.

If you spot any faults or have any questions then let me know.

Happy Building

FT.
Old Jul 10, 2007, 04:41 PM
dekan is offline
Find More Posts by dekan
D'oh.. Dumb Left Thumb
dekan's Avatar
Thanks Si
I wonder what happened to Tomcor.... Holiday ?
Old Jul 18, 2007, 03:57 AM
tomcor is offline
Find More Posts by tomcor
Battery Powered==(*)==
tomcor's Avatar
I haven't checked in, in awhile ,sorry. The plane is all made from 9MM EPP . I sent Firetrappe some corrected dimensions. I have 2 carbon rods masking taped to the bottom of the wing at an angle also I added. You can use strapping tape instead. There is a 4MM carbon tube imbedded in the wing also. As you can see from the pictures. Happy Flying..
Last edited by tomcor; Jul 18, 2007 at 04:22 AM.
Old Jul 21, 2007, 04:02 PM
firetrappe is offline
Find More Posts by firetrappe
Build 2 Bounce!
Here are ammended plans from Tom's measurements. Changes from the original plans posted are as follows :

Fuselage and verticals have been scaled down slightly.
Wingtips have been made parallel (sweep removed).
Elevon length increased.
Verticals are now spaced slightly further apart.

FT.
Old Jul 22, 2007, 02:34 AM
dekan is offline
Find More Posts by dekan
D'oh.. Dumb Left Thumb
dekan's Avatar
Thanks Si. I am back from my holidays in Yorkshire.....no I didn't go by boat.

For our non English friends.......It's been very rainy here for the last month or so. Theres been flash flooding and a lot of places in the UK at the moment are underwater.

compare this to Warr's FFFLY for an Epp wing/Delta build
Last edited by dekan; Jul 22, 2007 at 05:19 AM.
Old Jul 22, 2007, 08:33 AM
msmith is offline
Find More Posts by msmith
Use whatcha got!
msmith's Avatar
FT - any chance on a full (non-tiled) plan?

That'll help me to scale it to fit my motors!

Thanks...

-mike s.
Old Jul 22, 2007, 10:54 AM
firetrappe is offline
Find More Posts by firetrappe
Build 2 Bounce!
David, I hope your holiday wasn't a total washout. This time last year I was flying every night, this year i'm lucky to get one good day a week

No worries MS, I meant to post them yesterday. I was thinking a 20" version with a C20 might be fun
Old Jul 22, 2007, 11:52 AM
dekan is offline
Find More Posts by dekan
D'oh.. Dumb Left Thumb
dekan's Avatar
Thank Si.

Holiday was ok, got about 2 hour of bright subshine a day.
Where I live south london if it's not raining it's very windy.

Thanks for the full size plans. I have just found a print shop that can print PDF's £1.70 to open the file + paper costs. I just had a full size plan printed of the Funder n' lightning for £3.90 Which for London ain't bad, I will probably get the Cutlass printed by them

What do you use to cut the slot for CF rods in EPP?
Last edited by dekan; Jul 22, 2007 at 11:58 AM.
Old Jul 22, 2007, 04:10 PM
msmith is offline
Find More Posts by msmith
Use whatcha got!
msmith's Avatar
Hi-5 FT!

20" w/ a C20 might be fun, but then again... A 30" w/ a 1700KV Blue (grey) wonder would also be cool

-ms


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video EPP Cutlass Park Flyer tomcor Electric Plane Talk 2 Jun 23, 2008 05:58 PM
Discussion Which EPP park flyer query??? alfabeta Parkflyers 9 Dec 18, 2006 05:27 PM
Park Flyer buyer info sheet, Lets create one. Ray Brooks Electric Plane Talk 5 May 30, 2001 12:00 AM
Need help with 400 for park flyer Cpietro Electric Plane Talk 2 May 21, 2001 02:35 AM
Manufacturer of Czech "Champion" park flyer Neil Stainton Electric Plane Talk 4 May 14, 2001 06:22 PM