How long from maiden flight on first plane to sucess with EDF jet? - Page 2 - RC Groups
Thread Tools
Apr 20, 2007, 11:15 AM
Registered User
There are many trainers to learn with. My favorite is the easystar. I think the best second plane is the superfly at I wish it was my second plane. It is cheap, fun and durable. It is also challenging enough to broaden your skills. Once you can fly it well, you can fly anything. I have been flying about six months and taught myself. I just recently joined a club. Nobody believed that I had only been flying six months. I credit the superfly and a simulator. I have an older version of the great planes. I am not expert but you may want to find an old version for cheap. Lots of fun to fly planes. I came from many years of rc electric cars. My only words of advice. Pay extreme attention to detail. Give yourself the best chance for success.
Sign up now
to remove ads between posts
Apr 20, 2007, 02:35 PM
Registered User
What GWS plane did you get? Slow Stick? E-Starter?
Apr 20, 2007, 03:56 PM
Registered User
Here's me after one week of flying my first RC plane (the Superfly). Now 2 months later I'm flying inverted and did my first outside loop this week. Only had one crash so far, nose dug into the dirt by 1 inch. Repaired in 30 minutes with hot glue.

A Phase 3 Fantom is next.

Superfly RC plane loops and rolls Part 1 (2 min 2 sec)
Apr 20, 2007, 05:28 PM
Registered User
sokmeister's Avatar
Originally Posted by Oreo
I've never flew anything before & I intend to teach myself on a very simple foam electric trainer. Once I'm confident that I can control that thing... then what? I've been reading the "most common beginner's mistakes" thread. It sounds like even after I've got this trainer plane down I still should master something a little more agressive first before I step up to where I REALLY want to be- the A10 or F16 EDF jets that zip around at about 100mph.

Any chance I could be capable of sucessfully flying those jets by the end of summer? Not a chance?

Back when, i started off with Wattage Mini-Max, flew the crap outa it. Graduated to the Wattage F-22(still have it, albeit chewed), then went to the saber/mig series electric ducted fan(still have mig)......i believe it was all within spring and summer....

shoot, electrics are relative inexpensive now, and hallllla light weights compare to those 10 cell Kans 950's !!!! shiet roy!
Apr 20, 2007, 07:34 PM
It's a Great Day to Fly
LenBFP's Avatar

There are ususally a bunch of foam replacement wings for Parkzone planes. Maybe the Super Cub would be about the right size. How big was your damaged wing? What was the span and chord? About how thick?

After mastering a trainer, I would move to a Formosa. Get the sloper version and put a cheap brushless in it and learn to fly something that is aerobatic. Get used to an airplane that you need to fly all the time. They only cost $30 for the kit and another $40 gets you the brushless motor and ESC.

Last edited by LenBFP; Apr 21, 2007 at 05:29 AM.
Apr 21, 2007, 04:25 AM
Gliding like a rock!
Oreo's Avatar
OK, so I'm done making my replacement wing. I did a pretty darn good job actually, but I guess the REAL test will be when it's in the air.

Just as well though, 'cause, unlike the original wing, it's going to be REAL easy to put ailerons on this wing. I think I'm just going to do that before the maiden flight anyway because I may need to adjust aileron trim for any problems caused by air-foil shape inconsistencies.
Apr 21, 2007, 09:19 AM
I'm off my medication...
Hi Oreo,

Depending on how much time you have I think you can probably do it however, the keys will be:
- Plenty of simulator time - you don't have long enough to make all the mistakes and repair planes along the way.
- I think you probably want a step between the estarter and the EDF. Maybe a stryker C - will get you used to speed, and teaching you to think well ahead of the plane.

Most importantly - you will have to advance at a pace determined by how competent you are becoming, not by some articificial timeline. I think you can probably make it anyway, but don't let it push you to planes you are not ready for.

For example - until you can land your estarter within 20 metres of exactly where you want to - undamaged - 9 times out of 10 you probably have some more learning to do.

BTW - these notes might be useful to you - is a sort of self paced teach yourself to fly course I've been writing - you might think I'm nuts too...

Apr 21, 2007, 10:09 AM
EPP Addict
LuckyDay's Avatar
Multiplex has a new EDF jet coming out this summer/fall... It's probably not going to do 100 but it is Elapor (proprietary EPP like the Easy Star) so if you do dork it in you won't have too much trouble getting it back together.

I think it is a pretty big jump without an intermediate (the Stryker suggestion also sounds like a good stepping stone for you) and a sim can only do so much... although it is a valuable tool, you do need actual flight time too, so you can learn to fly out of trim or how to adjust for wind. Most of the lessons I learned outside the sim involved Hot Glue or CA! But they are valuable too, for when you get a nicer/faster plane. You can even fly the stryker stock, then add an EDF when you get tired of it, to learn the new power system on a familiar plane.

That said, every pilot is different, you seem pretty determined and you did start with a logical trainer so I say go for it.
Apr 21, 2007, 06:46 PM
Gliding like a rock!
Oreo's Avatar


I'm greatfull(sp) to everyone here for all the suggestions so far. It's good info.

I tend to pick these kinds of things up quicker then most but there's no way to know for sure till I get a few good attempts in.

I'm uploading about 5 pics of my plane to photobucket now. I'll post them here as soon as I'm done. I'd love to hear comments / suggestions on the wing / airfoil I made. (Actually, the pics are done now! So here they are...)

Granted, I'm not finished building it yet. But you get the idea from these.
Last edited by Oreo; Apr 21, 2007 at 06:52 PM.
Apr 22, 2007, 02:25 AM
Gliding like a rock!
Oreo's Avatar
I just realized something! The way I've got two servos controlling the ailerons... I now have FLAPerons!!

My only concern is weight. The kit called for sub-micro servos & I'm using regular sized servos. (The ones that come with the DX7 tx) Not to mention that I'm using four instead of two, and my wing is a little heavier then the almost paper thin original. I hope the cheapy motor that came with the kit is enough to keep me in the air. I could always get a more powerfull motor, but then I'm pushing the limits of safe teach-myself speed.

I will say though... working with this foam stuff is much easier then I thought it would be. The stuff sands down really easy into exactly the shapes & curves I want. Makes me consider the future possibility of making that EDF jet I want out of foam. I think I'd be plenty capable of putting together a very nice foam body out of this stuff.
Last edited by Oreo; Apr 22, 2007 at 02:31 AM.
Apr 22, 2007, 03:15 AM
Lovin' this florida weather!
Regarding the last two pictures.... You could have moved the two aileron servos inward, towards the fuse more, that way you would eliminate the need for servo wire extensions.

And remember... the heavier you make her.. the faster she'll have to fly to get, and stay, airborn. I would look into getting smaller (micro) servos to save on weight.

Secondly, watch your wing loading.

Fun and safe flying
~Tim~ (TheDustyPagan)
Apr 22, 2007, 04:08 AM
Gliding like a rock!
Oreo's Avatar
What do you mean by "wing loading"? What should I be watching exactly?

I was very carefull to measure & place the servos on the wings equidistant from center-line.
Apr 22, 2007, 04:32 AM
Lovin' this florida weather!
Originally Posted by Oreo
What do you mean by "wing loading"? What should I be watching exactly?

I was very carefull to measure & place the servos on the wings equidistant from center-line.
Your wing loading, is basically the amount of "weight load" that is put onto your wings.. (depending on how heavy you make your plane, and the type of wing you have).

If your wingloading is low... you will fly slower and more floaty... if your wing loading is high... you will fly faster. But that's a vague way to tell it. Alot of how you fly regarding wieght, has to do with the type of airfoil you're using, just as much as your wing loading itself.

There's a way to calculate your wing loading on any given plane, by measuring your wing, but quite honestly, I haven't gotten that far in depth in flying, that I do this with my planes. Lol, I just quesstimate the overall weight, and flying style of the plane, and then I get a strong enough brushless outrunner to do the job!

Fun and safe flying
~Tim~ (TheDustyPagan)
Apr 22, 2007, 04:33 AM
Registered User
for some reason i am not able to see the pix
Apr 22, 2007, 04:51 AM
Gliding like a rock!
Oreo's Avatar
I don't know? They work fine for me on every computer I've been on. They worked for thedustypagan.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Still shaking from maiden flight with ES rkwfxd Beginner Training Area (Aircraft-Electric) 7 Jan 08, 2007 12:28 AM
First Solo Sky Scooter flight on 19 April 2003 (with assistance on the hand launch) Tfour2 Beginner Training Area (Aircraft-Electric) 3 Apr 22, 2003 03:44 PM
Advice on first plane bkazez Foamies (Kits) 4 Jun 02, 2002 06:24 PM
Cool Total "noob" looking for advice on first plane djv Parkflyers 15 Mar 05, 2002 10:43 PM
maiden flight on modified lmh a sucess!!! Jeremy_D Electric Heli Talk 6 Oct 27, 2001 10:00 PM