Thread Tools
Apr 17, 2007, 03:55 PM
Team Futaba
Devin McGRath's Avatar
Thread OP
New Product

NEW! E-flite park 180


Well guys E-flite is going even smaller ! The new park 180 was on display at Toledo !





Park 180 Brushless Outrunner Motor, 2200 Kv


Key Features

Ideal for 3D models weighing 2–3 oz (55–85 g) and sport and scale models weighing 3–6 oz (85–170 g)
Ideal for indoor and outdoor small aerobatic park flyers
Extremely quiet and lightweight - just .3 oz (8.5 g)
High-torque, direct drive alternative to inrunner brushless motors
Designed for firewall mount or carbon tube mount
4- to 8-cell Ni-Cd/Ni-MH or 2–3S Li-Po
Up to 30 watts
Includes prop adapter
Includes mount, mounting hardware and 2mm gold BL connectors
Upgraded performance for indoor motors
High quality construction with ball bearings and hardened steel shaft


Overview

Ideal for 3D models 2-3 oz (55-85g), and sport and scale models 3-6 oz (85-170g) or models requiring up to 30 watts of power.


Specs

Type: Brushless Outrunner
Size: 180
Bearings or Bushings: Bearings
Recommended Prop Range: 5.5x4.5 to 8x6 ‘Slow Flyer’ for 2S or 4x4 or 4.5x3 for 3S
Voltage: 4.8-11.4V
RPM/Volt (Kv): 2200
Resistance (Ri): .91 ohms
Idle Current (Io): .30A @ 8V
Continuous Current: 2.6A
Maximum Burst Current: 3.2A (15 sec)
Cells: 2-3S Li-Po or 4-8 Ni-Cd/Ni-MH
Speed Control: 4A-6A Brushless
Weight: 8.5g (.30 oz)
Overall Diameter: 16mm (.63 in)
Shaft Diameter: 1.5mm
Overall Length: 20mm (.80 in)

Needed to Complete
4-6A Brushless ESC

2-3S Li-Po or 4-8 cell Ni-Cd/Ni-MH

Slow Flyer Prop
Sign up now
to remove ads between posts
Apr 17, 2007, 05:02 PM
If u wind it it will run!
usedhippo's Avatar
freaking sweet! what will pricing be like?
Apr 17, 2007, 05:44 PM
Registered User
i think they said 42 dollars.
ryan
Apr 17, 2007, 05:45 PM
iWeasel
jludwick's Avatar
How about $41.99...http://www.horizonhobby.com/Products...rodId=EFLM1120
Apr 17, 2007, 06:11 PM
Paul Teesalu
ss2p's Avatar
wow that's what I call small.. 250 was extremely small I could not imagine how small is this :d
Apr 17, 2007, 06:27 PM
If u wind it it will run!
usedhippo's Avatar
thats a good price too compared to what most people are getting for a motor that size.
Apr 17, 2007, 07:17 PM
Registered User
Dr Kiwi's Avatar
That 8x6 APC SF on 2s in the specs has GOT to be in error! Surely anything much bigger than a 6x3 or 6x4 will draw >3A on 2s.
Apr 17, 2007, 09:20 PM
BOSS
j_z_123's Avatar
With milled out planes, air brakes, and now crazy light equipment, ETOC is going to be simply amazing next year. The airplanes and electronics have changed so much between this years ETOC and last years, I cant wait to see what 2008 has in store. Nice job this year, Devin! Thanks for posting this.

Jon
Apr 17, 2007, 10:29 PM
Sky Pilot
still4given's Avatar
Awesome dude!

Gots to git me one of those.
Apr 18, 2007, 01:18 AM
Max
Sounds like this will be a killer of all other sub 10gr brushless motors. Especially for the price.
era of 3d flying @ home is near, people.

Great news !
Apr 18, 2007, 04:56 AM
Crash & Burn
rmgmag's Avatar
Looks nice, what plane would you put this in?
Apr 18, 2007, 06:16 AM
If u wind it it will run!
usedhippo's Avatar
a small 20ish inch wingspan plane i guess. i want one!
Apr 18, 2007, 06:49 AM
-(-<
Mister UHU's Avatar
Quote:
Originally Posted by Dr Kiwi
That 8x6 APC SF on 2s in the specs has GOT to be in error!
Of course its a mistake, it should read 10 X 5 !!!

More seriously, this motor it much cheaper than the gems that Uttam makes.

If it works at all well it should bring ultra micro 3D flying into the budget of many more people.

As for the prop sizes I think using the nearest Uttam motor as a guide would be useful.

Potential buyers of this motor should be aware,
that getting maximum performance at these weights
requires buying other ultra light parts,
and then reducing the weight of wires, glues, carbon bracing, etc,
to an absolute minimum, which can be a bit of a pain.

There are a lack of aircraft kits in this size range,
it will probably take at least a year for the trade to catch up.
Apr 18, 2007, 06:54 AM
-(-<
Mister UHU's Avatar
Website says it won't be available until mid-June (2 months +).
Apr 18, 2007, 09:10 AM
Team Futaba
Devin McGRath's Avatar
Thread OP
Well guys I have one of these motors to test. I will be getting pictures of it next to some other popular motors that everyone is more familiar with. I will also be putting it on a watt meter when I get home tonight...


I plan on building a milled out Edge 540 shock flyer to put it on sense I already have one milled out. (We used it as a test for the ETOC planes we milled this year). I also hope to start building tonight.


Devin McGrath


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Must See New E-Flite Park 300 In action gaelin Electric Motor Design and Construction 1 Feb 27, 2006 04:20 PM
Cool Check it out! New E-Flite Park 300 Outrunner gaelin Electric Plane Talk 0 Feb 27, 2006 04:18 PM
Sold For Sale - New E-flite park 400 outrunner 920kv stealthy Aircraft - Electric - Power Systems (FS/W) 2 Feb 06, 2006 01:13 PM
For Sale New E-flite park 400 outrunner. stealthy Aircraft - Electric - Power Systems (FS/W) 3 Dec 23, 2005 08:00 PM
Fs:new E Flite Park 400 Brushless chopped_d Aircraft - Electric - Airplanes (FS/W) 4 Oct 04, 2004 11:37 PM