Shop our Airplanes Products Drone Products Sales
Thread Tools
Apr 09, 2007, 05:17 AM
Registered User
massimo's Avatar
Discussion

Wowwee Flytech Dragonfly my out door video/mod.tail


Hi to all dear friends,
i have realized this video today for yours


FlyTech Dragonfly (3 min 55 sec)
Sign up now
to remove ads between posts
Apr 12, 2007, 12:39 PM
Registered User
massimo's Avatar
Hi to all

today I had time and I have dedicated all the day to the modification of my flytech now seems a butterfly...
is much light one and the flight is fast if you increase the motor. The bad dolphin flight now is disappeared and I soon give to you a video.

regards
Apr 16, 2007, 01:43 PM
Registered User
massimo's Avatar
Hi to all ,
I had promised you this second outdoor video :

Wowwee FlyTech Dragonfly outdoor II (2 min 53 sec)



Now the model is perfect, eliminated the "dolphin flight" and the flight is much fast one.

My next mod:
Replace the original rx with plantraco micro 2ch batterfly rx ...because I have problems of interference with original rc system




PS

Soon i arrive to New York City
I would want an aid from some rcgroups friend If you live in the BIG Apple that can carry me in big rc model store ...
please send me a pm!
thank you in advance.
Regards
Apr 20, 2007, 08:22 AM
Registered User
then if i remove the "canopi" the dragonfly its more faster? i want remove the elapor but i dont want a faster dragonfly cos i want it for indoor.

the fligth times are longer now?

excuse my english.
Apr 20, 2007, 01:41 PM
Registered User
massimo's Avatar
Quote:
Originally Posted by neuro
then if i remove the "canopi" the dragonfly its more faster? i want remove the elapor but i dont want a faster dragonfly cos i want it for indoor.

the fligth times are longer now?

excuse my english.
Hi dear
1)yes w/o "canopi" the dragonfly is +15% more faster but this depend also on the CG.
2)Yes the flight time is greater but I can be specify between some day. Now have installed in my dragonfly the 3 ch plantraco micro rx.

Regards
Apr 20, 2007, 09:19 PM
Registered User
you gonna use 2 actuators? and a bigger lipo? i want try this.

i remove the canopi and part of the tail but now i need less weith than after ,i just move the lipo forward and cut part of the foam of the tail,before this i was usin a half paperclip on the tail for trim but not now and when i can i gonna tru to use bigger wings all for less wingload.
Apr 21, 2007, 12:40 AM
Registered User
massimo's Avatar
Hi to all,
Neuro ,
no act. no other lypo but standard tail motor and lypo.
i want add another micro motor with prop. for elev funct.
regards
Apr 21, 2007, 10:17 AM
Registered User
and how you conect the motor to the tx? like a servo?
Apr 21, 2007, 01:44 PM
Registered User
massimo's Avatar
Yes dear
Apr 21, 2007, 02:27 PM
Registered User
massimo's Avatar

plantraco rx


my dragonfly with plantraco rx
now with only tow ch.
Apr 21, 2007, 10:38 PM
s15
s15
Registered User
s15's Avatar
how it flys?vids
Sep 28, 2009, 07:16 AM
IAD
IAD
UAV Driver
IAD's Avatar
So, did the Micro9 work with the low-impedance motor? I'm thinking of trying this myself, but I'm worried about burning the RX, due to excessive tail motor current...

~Luke


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Picked up your Wowwee Flytech Dragonfly? Manchild Ornithopters 629 Oct 06, 2009 11:00 PM
Discussion Wowwee Flytech Dragonfly VIDEO!!! massimo Ornithopters 16 Apr 29, 2007 11:36 AM
Link If anyone's interested in the (WowWee) FLyTech Dragonfly..... Corbin_Dallas Ornithopters 0 Jan 29, 2007 07:50 AM
Discussion Upcoming Wowwee Flytech Dragonfly Steve McBride Micro Ready-to-Fly 16 Dec 06, 2006 07:44 AM
Adding this to my wish list....Video Check it out Sony QRIO Bud Morrison Life, The Universe, and Politics 5 Apr 08, 2004 10:24 AM