Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 15, 2002, 01:22 PM
Administrator
jbourke's Avatar

Need to convert PowerCAD files (flx) to DXF or PLT files


Uh-oh. It's time to send some of my design work to a laser cutter and I just now find out that PowerCAD LT won't save to DXF!

I hope someone here has the full version of PowerCAD or some other program (Autocad?) that can read in FLX files and write them out as DXFs or PLTs. Help me out, please.

Otherwise, I'll have to pay $500 for the full version of PowerCAD.

I guess it's time to bite the bullet and purchase a CAD program.

Jim
Sign up now
to remove ads between posts
Oct 16, 2002, 02:42 PM
Registered User
Zoltar's Avatar

HPGL converter....


Hi Jim,

I know about this problem in general.

I do not think it will read FLX files.... but you just have to see if it

can import an other format that PowerCad can write.

There is a small German program which is really good for this

purpose and maybe many other tasks in your CNC future

(at least it will be in mine)

Its called "Bocnc"

http://www.rcmodels.net/cnc/soft/soft.html

under "optimizer" Its free and its actually the best I've seen

This will sort out many problems you may have with files....

I think the German language does not have to be a problem as it

work nice and intuitive. Just give it a try!

Good luck on your files conversion.


Anyway If you want my opignion on CAD software just get

yourself a version of QuickCAD, A cheap spinoff of Autocad.

But much Nicer to work with. I use it for allmost three or four

years now for all my 2D drawings and its absolute worth the

money!

Regards,

Chris
Last edited by Zoltar; Oct 16, 2002 at 02:51 PM.
Oct 16, 2002, 03:17 PM
Pro Bro # 179
KevinM's Avatar
Hey Jim,
I just looked through all of my AutoCAD programs and havent found any reference to FLX files. What program saves in that format???

I'd be more than happy to help out. I have access to 3 full versions of AutoCAD and Corel Draw and some others.

KevinM
Oct 18, 2002, 09:42 AM
Administrator
jbourke's Avatar
Ok, there is a solution so I won't have to redraw my designs after all!

It turned out to be pretty simple. You just have to download the trial version of PowerCAD Pro. Then you have 30 days to convert your files.

The lack of full read and WRITE DXF file compatibility makes PowerCAD LT+ a poor choice for modelers, despite the fact that it is free. The website mentions DXF compatibility several times but glosses over the fact that it is read-only in the free version. A 2D only version with full DXF file compatibility could be marketed successfully at a lower price.

Jim