Thread Tools
Nov 07, 2008, 08:42 AM
Registered User
We need plans though Tram.
Sign up now
to remove ads between posts
Nov 28, 2008, 09:55 AM
Sure it'll hover!
omster's Avatar
Here's a 28" version of Steve's original Su-37...
All the foam parts will fit on four 13x39" depron sheets (the wood parts aren't included in the plans). The main wing had to be cut differently from the original plans, but should be easy to figure out.

I had it printed locally for $6. Just cut to 13x39" and tack on with Super 77.

--- Whoah, the front piece is 2.5" short due to using 13" wide depron - I had to add on later, but it's not in the plans, make sure to account for this or you'll have snub-nose lookin' Su-37!!! Check scale against original plans to be sure!
Last edited by omster; Jan 01, 2009 at 03:00 PM.
Nov 28, 2008, 10:19 AM
vij
vij
Registered User
I dont know if this has been up before but what do you think about running two GH2212-06 Brushless Motor V2 in the original size aircraft?

Jocke...........
Nov 28, 2008, 10:22 AM
customstandoffs
cmala's Avatar
I did it with two of the original 2212-06's and it worked well.

Plenty of power

Search this thread for my specs
Nov 28, 2008, 12:46 PM
(TechDad) Bob Templeton
T3chDad's Avatar
I'm now the proud owner of Craig's (cmala) old Flanker that he just mentioned and the current draw with the two GH2212-06 with 6x4 props is 36A/366W WOT. I'm thinking about putting 6x5.5 props on there to get the power up some. We'll see, I need to get that TV motor mount fixed first though.

Bob
Last edited by T3chDad; Nov 28, 2008 at 01:11 PM.
Nov 29, 2008, 08:51 AM
Registered User
Where are the plans???



Quote:
Originally Posted by omster
Here's a 28" version of Steve's original Su-37...
All the foam parts will fit on four 13x39" depron sheets (the wood parts aren't included in the plans). The main wing had to be cut differently from the original plans, but should be easy to figure out.

I had it printed locally for $6. Just cut to 13x39" and tack on with Super 77.
Nov 29, 2008, 10:22 AM
Registered User
Frojd's Avatar
Quote:
Originally Posted by Coop
Where are the plans???
First page, post #5
Nov 30, 2008, 10:16 AM
Sure it'll hover!
omster's Avatar
Quote:
Originally Posted by Coop
Where are the plans???
Sorry - the first sets were saved @ 300 dpi (22-24MB) so never uploaded. I re-saved them @ 72 dpi... much smaller now.
Last edited by omster; Dec 01, 2008 at 02:35 PM.
Dec 05, 2008, 11:18 AM
Registered User
I have a six channel radio. What is the recommended setup for this model using 6 channels?
Dec 05, 2008, 12:02 PM
(TechDad) Bob Templeton
T3chDad's Avatar
1-Throttle
2-Elevon 1
3-Elevon 2
4-Rudder
5-TV 1
6-TV 2

I used four mixes to setup the TV.
1- Elevator+ -> TV1
2- Aileron+ -> TV1
3- Elevator- -> TV2
4- Aileron- -> TV1

I hope that makes sense.
Latest blog entry: I've been flying!
Dec 05, 2008, 05:00 PM
Real name's Teja :)
teha99's Avatar
hey guys i want to buy this plane because it looks so cool! i have a few questions.

is it and easy build? how long does it take and do you need artistic abilities to make it look as good as Jetsett44's?

is it hard to fly? what is a cheap slow setup for this plane?i would like thrust vectoring also.

any help?
Dec 05, 2008, 10:32 PM
(TechDad) Bob Templeton
T3chDad's Avatar
No, it's not an easy or quick build with about 90 pieces of foam, laminating, heat forming, shaping and sanding. I had 60 or so hours in mine. You do need some artistic abilities (shaping, sanding, painting) to get it to look good. It's not hard to fly, but it's definitely not a beginner plane. My second one that I got from cmala has two Grayson 2212-06 motors and 30A ESCs...not "cheap" at $80, but still about half the cost of Steve's LSPJ setup. The servos are TowerPro/Hextronic ($5ea) and a couple of HS-81MG ($20ea).
Latest blog entry: I've been flying!
Dec 06, 2008, 07:23 PM
Real name's Teja :)
teha99's Avatar
damn, that is one sweet looking plane though! are there anyother arfs of the su-37 out there?
Dec 06, 2008, 08:13 PM
(TechDad) Bob Templeton
T3chDad's Avatar
Hobby Lobby sells the Free-Air Su-27 and the Artech. I don't know of any other arfs.

http://www.hobby-lobby.com/free-air-jets.htm
http://www.hobby-lobby.com/su-27.htm
Latest blog entry: I've been flying!
Dec 06, 2008, 10:26 PM
Sure it'll hover!
omster's Avatar
Quote:
Originally Posted by teha99
damn, that is one sweet looking plane though! are there anyother arfs of the su-37 out there?
It's not an ARF, but here's a great flying, easier-to-build Su-37... this was my 2nd scratch build (3mm depron) and it flies great. I'm currently working on a 28" VT version of Steve's model... can't wait to fly her, knowing how well the Su-37 flies without VT!!!

http://rc.tomhe.net/su-37


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Super Bandit Park Jet jetset44 Pusher Prop Jet Models 1094 May 04, 2016 08:36 PM
Discussion SU-38 super Flanker... pps/ going e-power Insanety Pusher Prop Jet Models 2 May 02, 2008 09:47 AM
Video Sukhoi Su-37 Maiden Flight Nadim Electric Plane Talk 2 Jul 12, 2007 04:41 AM
For Sale Walkera SU-27m/SU-35 Super Flanker $100 skotbro Aircraft - Electric - Jets (FS/W) 3 Dec 06, 2006 08:42 AM
Power set up for Great Planes Sukhoi SU-31 3D Profile Park Flyer Airplane? ChrisK7 Beginner Training Area (Aircraft-Electric) 0 May 14, 2005 06:15 PM