Originally Posted by Rick F.

Hey guys, I just read through this entire thread. It took me a few days. I have the nock off at-6 from BH and would like to purchase this one. It sounds so much better. Anyway, does anyone have a link to buy this kit. Thanks

HeadsupRC.com. They carry most of the GWS kits, and some spare parts. They are located in Florida and they ship super fast. I buy all of my motors and lots of smaller parts from them. I have bought 2 kits from them. The GWS Tigermoth 400, and the Multiplex Funjet. If you are wanting to buy GWS planes, look at Headsuprc.com first!!

Cub

Originally Posted by Cubcrazy

HeadsupRC.com. They carry most of the GWS kits, and some spare parts. They are located in Florida and they ship super fast. I buy all of my motors and lots of smaller parts from them. I have bought 2 kits from them. The GWS Tigermoth 400, and the Multiplex Funjet. If you are wanting to buy GWS planes, look at Headsuprc.com first!!

Cub

Excellent company to do business with. I've ordered a bunch of motors from headsuprc. Had one bad one. Sent an email and he replaced saying "keep that one for spare parts, I'll send you an new one." Get the replacement in 2 days. Excellent customer support.

Here's a link to the GWS T6: http://www.headsuprc.com/servlet/the...T-dsh-6/Detail
This motor will bolt right onto the outrunner stick mount adapter: http://www.headsuprc.com/servlet/the...lectric/Detail
http://www.headsuprc.com/servlet/the...r-Mount/Detail
Use at least a 20amp ESC: http://www.headsuprc.com/servlet/the...OLS/Categories
You might want to order a replacement cowling while you're at it: http://www.headsuprc.com/servlet/the...Cowling/Detail

hi Guys., let me post some photos I found in files about GWS-T6 in Taiwan.

https://www.rcgroups.com/forums/show...9#post18315075

https://www.rcgroups.com/forums/show...5#post18851944

Just picked up an EPP AT-6 for < $40. Well packed, and nice kit (all my previous GWS kits have been much older - this seems like "Generation 2").

It seems a little long-in-the-nose for a T-6 Harvard, so wondering if I should do a "Hollywood" and paint it as a Japanese torpedo bomber. Or maybe a slight kitbash (revised tail profile) into something more interesting like a Vultee Vengeance?

Or maybe go in-line and an Ar-96?

Or cut the cowl shorter for a better looking AT-6 ?

Chen

Originally Posted by twn Chen

Or cut the cowl shorter for a better looking AT-6 ?

Chen

Thanks Chen - might be an idea if using a (short) outrunner...

Working on the GWS AT-6. It is EPS and glassed on the bottom of the wing only. I want the model to be a slow flier and believe it will be.