BMS-376DDG Digital Micro Servo For Tail?? - RC Groups
Thread Tools
Mar 24, 2007, 07:26 PM
Destructive testing expert!
Bill Sanford's Avatar

BMS-376DDG Digital Micro Servo For Tail??

Anyone tried one running with a 401 in digital servo mode?

They are quite cheap for a digital and seem to have good specs.

Weight: 9.8 Grams / 0.41 oz (with wire)
Size: 24.5 x 11.5 x 23 mm / 0.99 x 0.46 x 0.91 in.
Torque At 4.8V: 21
Speed At 4.8V: 0.11 sec / 60
Torque At 6.0V: 26
Speed At 6.0V: 0.09 sec / 60
Ball Bearing: Yes
Metal Gears: No

See Link:

Just curious...

Sign up now
to remove ads between posts
Sep 01, 2009, 10:41 AM
Registered User
bump. I'm looking at this servo, and would like any opinions. Not necessarily with 401 gyro.
Sep 01, 2009, 04:11 PM
Dylwad's Avatar
I couldnt get mine to work with a futaba 240, might be different with a 401 or other gyro with a digital setting. Worked fine plugged directly in to the RX, actually used it on the rudder of a 40" foamie for a while, it would oscillate on the ground but behaved fine in the air.
Sep 02, 2009, 03:26 PM
Registered User
woops. Think I'll find a different one to use. Thanks!

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
What Mini Digital Servo for tail on BT corona?? Orion_V Electric Heli Talk 19 Sep 24, 2006 10:47 AM
For Sale JR DS281 281 digital micro servo (used) (2pcs for $50 shipped) adamg Aircraft - General - Radio Equipment (FS/W) 1 Sep 14, 2006 11:34 PM
Question [TREX] Digital servo for tail? LanternMaker Mini Helis 2 Jun 25, 2006 09:43 AM
The Best Sub Micro Servo for tail rotor? Charlie1 Micro Helis 2 Sep 08, 2005 08:08 AM
Best micro servo for low voltage? Tapio Radios 4 Aug 28, 2002 07:04 AM