Pictures of My Demon Family - Page 2 - RC Groups
Thread Tools
Mar 26, 2007, 01:08 AM
FPV for Me
TaSaJaRa's Avatar
Quote:
Originally Posted by Atom1025
Finally got her covered! Just gotta add control horns and motor! Take a look!

Het 4w/ 7x5 prop
3s2p pack, undecided on the brand
CC 80(overkill but I had one on hand)
electron 6
225mg
UBEC/ 300mah 2s
opto isilator

Plus I have room to jump to 4s1p and a 6x4 if desired.
Your plane is Looking good....

I have a
Medusa 40-28-2500
CC Ph 80
Medusa BEC
Medusa OptoIsolator
500mah 2s Rx battery
2- TP 3300 2SX running 4s
Berg RX
5.5x4.5 apc
I checked the rpm and it was just over 30k

Also just got a pair of 3850 2SX to try with a 6x4 prop.
Last edited by TaSaJaRa; Mar 26, 2007 at 04:23 PM.
Sign up now
to remove ads between posts
Mar 26, 2007, 02:03 AM
Purples a fruit
punkrockd's Avatar

my demon 40


here is mine so far. i have neon pink to make the accents.


this purple rocks!!
Mar 26, 2007, 08:51 AM
Mum is the word!
Hey punk try cutting your lids open before you cover the top ,or it gets to be a difficult guessing game.I dont know if you did I cant tell but it looks like maybe not.
ck
Mar 26, 2007, 09:03 AM
Purples a fruit
punkrockd's Avatar
got em cut already i just mad sure they were flat so i didnt have to fight the covering to stick in that little area.


thanks ck.
Mar 26, 2007, 04:19 PM
FPV for Me
TaSaJaRa's Avatar
Quote:
Originally Posted by punkrockd
here is mine so far. i have neon pink to make the accents.


this purple rocks!!
hummmmm looks like my TL50, same color....
Mar 26, 2007, 04:58 PM
Purples a fruit
punkrockd's Avatar
yup i'd say its the same. not to much to choose from with the monokote. i mean good colors anyway. definitely got to stand out.
Mar 28, 2007, 01:36 AM
Purples a fruit
punkrockd's Avatar

my demon so far


i still need to cut down my push rods, cut out the left side in pink and adjust my motor it is a bit off. left to right. its very small so I'll have to grind the holes a little. sucks but oh well. i ran it up with a separate rx pack and it was GOLDEN.

i think some of you may not like it. but this is the absolute most creative thing I've done with out help.

not bad for a slacker.
Mar 28, 2007, 01:46 AM
resU deretsigeR
PaulVi's Avatar
Nice i like the purple potato chip...

Specially like the neon camo look very sharp.. and im noticing a trend with the ritewing group we are mostly all starting to include hot pink in out builds... wonder if it has to do with the fact that color just jumps right out under all conditions..

Maybe CDF should paint the Forresrty trucks that color for visibility from the ground and air.. :0
Mar 28, 2007, 01:49 AM
just winging it
john wing's Avatar
(i like the graphics) man that just gave me some ideas.i am thinking purple and neon green and neon pink.
Mar 28, 2007, 01:51 AM
resU deretsigeR
PaulVi's Avatar
Quote:
Originally Posted by john wing
(i like the graphics) man that just gave me some ideas.i am thinking purple and neon green and neon pink.
watch out for the green it will become transperent in low light..

JK.....

Saw your build pics on the mini your doing fine it is looking spot one...

Don't be to hard on your self you will kill it in the end..

Also thought you might like to see what i did the last few nights not a ritewing but should be a hoot to fly..
Last edited by PaulVi; Mar 28, 2007 at 02:01 AM.
Mar 28, 2007, 01:54 AM
FPV for Me
TaSaJaRa's Avatar
Quote:
Originally Posted by punkrockd
i still need to cut down my push rods, cut out the left side in pink and adjust my motor it is a bit off. left to right. its very small so I'll have to grind the holes a little. sucks but oh well. i ran it up with a separate rx pack and it was GOLDEN.

i think some of you may not like it. but this is the absolute most creative thing I've done with out help.

not bad for a slacker.
I love that look.... It is a super nice design..
Mar 28, 2007, 09:22 AM
Purples a fruit
punkrockd's Avatar
thank you guys. i drew out the wing on some paper and just kept messing with lines. took a while. but i am proud.

the tl 50 i was thinkin about some cool looking jack-o-lanterns in neon orange over black. me and adam were talkin bout it the other day.


wouldnt that be a sight, a neon pink fire truck.
Mar 28, 2007, 10:21 AM
FPV for Me
TaSaJaRa's Avatar
Quote:
Originally Posted by PaulVi
watch out for the green it will become transperent in low light..

JK.....

Saw your build pics on the mini your doing fine it is looking spot one...

Don't be to hard on your self you will kill it in the end..

Also thought you might like to see what i did the last few nights not a ritewing but should be a hoot to fly..
Paul whats the wing made of?? Looks like my AZ Shrike just with out the fuze.
Mar 28, 2007, 10:50 AM
resU deretsigeR
PaulVi's Avatar
Quote:
Originally Posted by TaSaJaRa
Paul whats the wing made of?? Looks like my AZ Shrike just with out the fuze.
Justa CF tube.. the plane can be built in a few hours hardest part was sanding the airfoil into the balsa plank.

The short kit was inexspencive,, and it will do about 40mph on a simple ips50 motor I have the fieguo in mine.. so do about 60.. it so small at that speed i will have a hard time keeping my old eye s on it..
Mar 28, 2007, 01:41 PM
Flying motor mount master
fly_boy99's Avatar
Sweet Paul-

If you bring it out we can have AR races.

https://www.rcgroups.com/forums/show...72&postcount=5

B


Quote:
Originally Posted by PaulVi
Justa CF tube.. the plane can be built in a few hours hardest part was sanding the airfoil into the balsa plank.

The short kit was inexspencive,, and it will do about 40mph on a simple ips50 motor I have the fieguo in mine.. so do about 60.. it so small at that speed i will have a hard time keeping my old eye s on it..


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Pictures of my new Omega 1.8 !!! jshelton Electric Sailplanes 17 Aug 21, 2002 12:29 AM
Pictures of My New ELMH (redone gasser) Acer Electric Heli Talk 5 Feb 15, 2002 12:12 AM
Pictures of my CP Piccolo flying Eco8gator Electric Heli Talk 12 Jan 11, 2002 02:51 AM
Pictures of my X10 video setup (trying again) BEC Power Systems 0 Sep 16, 2001 02:59 AM
Pictures of my newly re-taped Zagi 177ichael Foamies (Kits) 7 Jul 31, 2001 04:52 PM