Shop our Airplanes Products Drone Products Sales
Thread Tools
Oct 09, 2002, 11:31 AM
Registered User

Startup on Beat controller

I'm using a Beat 50-8-30 controller in a logo 10 with a Hacker motor on 12 cells. I have a difficult time getting it to start. I have to turn the trottle on and off 4 or 5 times before it gets going. Makes me wonder what I'ts going to do when I hit trottle hold. I went on their web site looking for an answer. Nothing!! I thought perhaps it might have something to do with timming. But as I understant it, it is self adjusting. Anyone have any clues?
Sign up now
to remove ads between posts
Oct 10, 2002, 08:41 AM
EDF Head
Haldor's Avatar
The ESC is selfadjusting but need a proper throttle range to start the arming sequence, make sure you have full throw on the throttle channel and put the throttle trim slider to zero aswell.

Just a thought
Oct 10, 2002, 12:53 PM
Registered User
I'll check my throttle range this afternoon. I've run into this problem on some of the first generation esc's, but not the later ones, until now. I've also heard some motors and esc combos will do this. though personally I've not run into this.
Oct 10, 2002, 03:47 PM
Our Daddy and Heli Junkie
Fred Bronk's Avatar
Be sure you are not bumping the trim to. The ESC reads the throttle % at start up, if you movethe trim after initializing you are changing the %.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
How Do I install the heatsink on a speed controller slooooow_flyer Beginner Training Area (Aircraft-Electric) 2 Jun 05, 2003 11:15 AM
Logo, Beat-controller = what mode? Allex Electric Heli Talk 17 May 16, 2003 02:17 PM
Is anyone using a Beat controller with a Hacker motor? Ben74 Electric Heli Talk 4 Jan 29, 2003 11:27 PM
Programming Beat Controller rscamp Electric Heli Talk 1 Apr 06, 2002 09:33 AM
any feedpback on the kontronik beat controller? bpu6999 Electric Ducted Fan Jet Talk 15 Mar 14, 2002 02:06 PM