Thread Tools
Mar 11, 2007, 08:46 AM
3d with an airliner
Francisco1's Avatar
Question

Futaba® 6EX w/2.4GHz FASST™ System


does this radio do copters Futaba® 6EX w/2.4GHz FASST™ System
Sign up now
to remove ads between posts
Mar 11, 2007, 09:13 AM
Registered User
pda4you's Avatar
Yes....

See here:
http://www2.towerhobbies.com/cgi-bin...1&I=LXPZT8&P=3

Click on the manual link...

Mike
Mar 11, 2007, 10:30 AM
Bush Pilots Bounce Higher
Spidious's Avatar
That one should work for helicopter just going by the manual.
Mar 11, 2007, 04:32 PM
3d with an airliner
Francisco1's Avatar
thanks all for the info just seeing if this would be my next radio thinking abut getting a t-rex













Awsom
Mar 11, 2007, 04:55 PM
DJI Testing / US Support
blade strike's Avatar
for that price I would get a chp7 w/ pcm rx.. Be as good as gold
Latest blog entry: QUICK TIPS - Spark
Mar 11, 2007, 05:11 PM
Only electrons, Martha
ShellDude's Avatar
Am I the only one completely annoyed with Futaba over this? Yet again, another disparate platform with 0 compatibility with existing equipment.

I hope Spektrum eats their lunch.
Mar 17, 2007, 05:57 PM
Registered User
6EX Fasst 2.4Ghz on a built-in 3-in-1 (Axe CP) isn't working for me..

Swash, Servo travel, curves.. everything setup fine but I can't for the life of me get any throttle (or even tail motor) power. Tested 3-in-1 with stock receiver to make sure it wasn't blown.. that still works.. *shrugs*
Mar 17, 2007, 05:58 PM
Only electrons, Martha
ShellDude's Avatar
just a hunch, but are you coming from a system other than futaba? If so try reversing your throttle channel.
Mar 17, 2007, 11:21 PM
TEAM SCHC
im annoyed with futaba about this. It took them so long to make a 2.4Ghz and another thing to put it as a 6EX form. sucks...
Mar 17, 2007, 11:41 PM
Registered User
Trying to replace the stock Helimax receiver with the 6EX receiver. Tried switching reverse on for channel 3 and all. (Power is also supplied to the receiver by the 3-in-1 throttle plug on that channel...) Wonder if that is where the problem lies.
Mar 18, 2007, 10:02 AM
Its up... Nope its not
spektrum dx7 with a cx2 rx changing the mix. do to way its set up it may take some playing to get it right.
Mar 18, 2007, 05:35 PM
Registered User
Got my 6EX FASST radio from Tower on Thursday. Transferred all my settings from my 6EXH 72mhz and it works just great. Took it to the last Golf Dome fly in Columbus last night and man was it ever nice not having to wait for my freq. to come up. Flew 4 batteries and never had to wait for the pin.
Mar 18, 2007, 08:34 PM
Registered User
I'm guessing that's not on a HeliMax 3-in-1 tho..

LHS had same problem with a 6EX PPM few hours before I got there today. After about 2 hours they threw in the towel and said they'd have to contact their Futaba Rep in the morning... Back to my stock POS transmitter for now..
Mar 18, 2007, 11:35 PM
Only electrons, Martha
ShellDude's Avatar
The real question here is whether or not you'd be having problems if you went with a DX6.
Mar 19, 2007, 09:37 AM
Suspended Account
Quote:
Originally Posted by mmillerr
Got my 6EX FASST radio from Tower on Thursday. Transferred all my settings from my 6EXH 72mhz and it works just great. Took it to the last Golf Dome fly in Columbus last night and man was it ever nice not having to wait for my freq. to come up. Flew 4 batteries and never had to wait for the pin.
So what is the deal here. Tower always is out of stock but are you guys Back ordering and they will ship anyway.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Futaba 7C 7-Channel 2.4GHz FASST System Review pda4you Radios 166 Aug 08, 2015 11:39 AM
New Product Which is better? Futaba 6EX w/2.4GHz (or) Spektrum DX7 HeliSmith Micro Helis 17 Apr 23, 2008 05:43 PM
Sold Futaba 6EX w/2.4GHz Fasst System bruff Aircraft - General - Radio Equipment (FS/W) 6 Jun 04, 2007 05:40 PM
Sold Futaba® 6EX w/2.4GHz FASST™ System Mikey 68 Aircraft - General - Radio Equipment (FS/W) 1 May 11, 2007 03:30 PM
Question Futaba® 6EX w/2.4GHz FASST™ System Francisco1 Radios 1 Mar 10, 2007 07:57 PM