Thread Tools
Mar 06, 2007, 10:50 PM
Indoor Free Flight Modeler

Hxt2835-2700 motor, been waiting for 11 WEEKS! Now you say wait 10 more days! No Way!

When will this motor be back into stock?

HXT2835-2700 HXT 2835 (380S) 2700kv Brushless Inrunner
Last edited by The Don; Apr 23, 2007 at 12:21 AM.
Sign up now
to remove ads between posts
Mar 07, 2007, 12:46 AM
CSO#1 @UHobbies's Avatar
We can only parrot to you what the factory say, and thats no later than the 22nd of this month.
The best would be the 13th.

Mar 20, 2007, 07:16 PM
Indoor Free Flight Modeler
Any update? Your website says in stock on the 19th but that has come and gone.
Apr 23, 2007, 12:19 AM
Indoor Free Flight Modeler
Here it is April 22, 2007 and guess what my motors are STILL ON BACKORDER. I ordered on February 3, 2007! I have waited 11 WEEKS and now am told by Janice to wait 10 more days! I will not . I have been very patient only because I was not planning on building the model I was going to install these motors in for several months. Well it is almost 3 months now since I ordered and I am very upset. I want an immediate paypal refund to my account for all backordered items on my account which adds up to $42.97. Here is the order number #20014800. I have waited long enough.

Don Slusarczyk
Last edited by The Don; Apr 23, 2007 at 12:24 AM.
Apr 23, 2007, 12:43 PM
Retired, NW Alabama
robert53's Avatar

Good luck! You may very well need all you can get.
Did you get an email??? How'd you do that?

Apr 23, 2007, 10:45 PM
CSO#1 @UHobbies's Avatar
Hello Don.
Let me speak very frankly about this matter.
I would like to describe the lead times that this factory gives us in one word, 'dodgy'.

I recall a meeting with the factory owner at the start of the year, '10 days maximum' was what we were told before placing our order and paying.

In reality we are getting 4-6 week lead times, with partial orders being filled.

We did receive more 28-35-2700 motors, however it was a partial order and didnt repplenish our stock fully.
If you had it on backorder and can supply your order ID I can check it for you, if it was on backorder it should have been filled by now as we recieved new stock on the 20th.

Might I suggest a change to one of these motors;
KB28-47-22S 1800kv Brushless Motor (FIN)
KB28-47-13S 3000kv Brushless Motor (FIN)
KB28-57-18L 1600kv Brushless Motor (FIN)
KB28-57-14L 2000kv Brushless Motor (FIN)
KB28-47-17S 2300kv Brushless Motor (FIN)
KB28-47-08S 4900kv Brushless Motor (FIN)
KB28-57-09L 3200kv Brushless Motor (FIN)
KB28-67-12XL 1900kv Brushless Motor (FIN)
KB28-67-16XL 1450kv Brushless Motor (FIN)
KB28-57-06L 4800kv Brushless Motor (FIN)
KDA 28-47 9Turn S Brushless Inrunner
KDA 28-47 22Turn S Brushless Inrunner
KDA 28-47 19Turn S Brushless Inrunner
KDA 28-57 15Turn L Brushless Inrunner
KDA 28-57 17Turn L Brushless Inrunner
KDA 28-47 16Turn S Brushless Inrunner
KB28-47-16S 2400kv Brushless Motor (FIN)

all are in stock, and many with similar Kv and weight.

Apr 23, 2007, 11:03 PM
Indoor Free Flight Modeler
Interesting, I just logged into my UH account and now it says my order has been posted.

Yesterday I received this email:

>Hello Don,
> I'm sorry that this item will arrive in 10days.
>Best Regards
>Customer Service Officer

I complain here, and now it is suddenly shipped? Makes no sense to me. Why is my tracking number blank? It says shipped by EMS (I paid form EMS) but no tracking number? Please provide a tracking number so I know it was really shipped, and not simply listed as "posted" to delay for more time.

>Hello, Don Slusarczyk
>This is an email to inform you that your item has been dispatched from our >warehouse.
>To check on the status of your parcel go to: ONLINE ORDER CHECK


Order ID# #20014800
Apr 23, 2007, 11:29 PM
CSO#1 @UHobbies's Avatar
It has nothing to do with rcgroups or any of the other 50-odd online forums we are discussed in.
Stock arrived recently, as can be seen from the stock level changes. When the stock arrived your order was moved to the print queue. It was then printed and packed.
This is normal procedure.
As I said in the previous post, the motors arrived recently.

Regarding your postage type;
Order 2009113 was EMS, however I think you requested for that ordet to be split.
It was split and in stock items sent EMS.
Order 20014800 was a duplicate. It was sent registered air mail at a cost of $7.00 shipping paid by us.

What I see is an inconsistency in the responses from Janice and the lead times of products.
I will be speaking to her regarding this.

Apr 23, 2007, 11:45 PM
Indoor Free Flight Modeler
As long as it has been shipped then that is fine. I was very upset as yesterday she told me 10 more days, and when I logged into my account earlier today the order was "unprinted" and "unposted" and the motor showed -7 stock. The order status changed to 'printed' and 'posted' only just a few hours ago.

Thank you for looking into this.

Apr 24, 2007, 11:26 AM
one game away...
PerfectStranger's Avatar
Amazing how they can ship an item that looks not to be in stock and hasn't been for months.
Apr 24, 2007, 05:55 PM
Registered User
Probedude's Avatar
Originally Posted by CSO#1 @UHobbies
Stock arrived recently, as can be seen from the stock level changes. When the stock arrived your order was moved to the print queue. It was then printed and packed.
This is normal procedure.
As I said in the previous post, the motors arrived recently.

How many motors came in? The backorder quantity for this motor was never large - less than 20 I think. Now the stock qty is -7. Did only 12 motors come in?

(also have this motor on backorder)
Apr 24, 2007, 09:42 PM
Make 'n Break!!
roosevelt's Avatar
I was waiting for this same motor. I requested email notification of when it arrives. I got notification a couple days ago that it was in stock. I immediately went to UH and it was out of stock.?? I gave up on getting it.
Apr 24, 2007, 10:34 PM
CSO#1 @UHobbies's Avatar
Hello Guys.
You're quite right.
And as I said before, we are only receiving parts of our order from the factory.
We have more of the same motor on order which should be here in 14 days.
Sorry agian for the delays. I know how frustrating it can be to have a plane sitting there waiting for a part before it can be flown.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Dude! I've been waiting for Lama 2 parts ktmrider Coaxial Helicopters 2 Feb 16, 2006 01:21 AM
This is what you've been waiting for: CNR USD! Kmot Motorcycles 38 Nov 21, 2005 05:15 PM
Lipos left for few weeks, now have low runtime!?!?!? Minimole Batteries and Chargers 17 Oct 04, 2004 02:15 PM
motor and battery recommendations for 11" Mystery Ship TimayTheToolman Scratchbuilt Indoor and Micro Models 23 Jun 30, 2004 04:28 AM
Alert Post Maiden I've been waiting for! LexTalionis Parkflyers 10 Jun 21, 2004 11:21 PM