SLOW-STICK X Build - Page 98 - RC Groups
Thread Tools
May 04, 2009, 06:59 PM
It's gone...
_OZ_'s Avatar
Great looking plane! I wish I could have seen it in person.
Sign up now
to remove ads between posts
May 04, 2009, 08:09 PM
End of an Era.....
Tha Hodgehound's Avatar
I flew it! Iflew it! na na nana na na!!!!!!!

Great job James!
May 04, 2009, 09:24 PM
OOPS
Manta1's Avatar
Quote:
Originally Posted by DaDesign
It was good to see you and Karen as well, James.
You did a great job on the Bipe and it looks good in the air. I like the pull-pull set up on the rudder.
I hope the sons made it in OK.
I wish we could have shared a little stick time on each others planes but maybe we can soon.

Dalton
DANG IT!! i knew i saw one of your spider ssx's there!! i saw you from a distance...a blue one i believe..i was in line at the thunderpower tent and didnt wanna lose my spot..i wanted to meet ya and check yur bird out a little more..it looked great from where i was...
May 04, 2009, 10:20 PM
ɹǝsn pǝɹǝʇsıƃǝɹ - inverted!
DaDesign's Avatar
Quote:
Originally Posted by Manta1
DANG IT!! i knew i saw one of your spider ssx's there!! i saw you from a distance...a blue one i believe..i was in line at the thunderpower tent and didnt wanna lose my spot..i wanted to meet ya and check yur bird out a little more..it looked great from where i was...
Thanks, It would have been my pleasure to meet you. I met so many nice people who were complimentary.
I look forward to meeting you and thank you for the kind comments.

Dalton
May 08, 2009, 11:15 PM
jkarpy's Avatar

SSX Biplane video


SEFF 2009 Saturday Flight Demos Part Two (3 min 37 sec)
May 17, 2009, 12:05 PM
Dutchdawgs Daddy
Wake_T's Avatar

New Stick in the air


Dutch SSX is ready for flight

Just finished my first "big" stick, after building a lot of micro's.
The building was a breeze, and I added some lights to it from the Xerogear guys.
Total weight is 22 ounce.
Now waiting for the maiden, and a lot of windless dark nights.
May 17, 2009, 12:13 PM
End of an Era.....
Tha Hodgehound's Avatar
Hey Rol!!! That is schweeeet!!!!!!!!
May 17, 2009, 12:28 PM
jkarpy's Avatar
Quote:
Originally Posted by Wake_T
Dutch SSX is ready for flight

Just finished my first "big" stick, after building a lot of micro's.
The building was a breeze, and I added some lights to it from the Xerogear guys.
Total weight is 22 ounce.
Now waiting for the maiden, and a lot of windless dark nights.
Nice work, that one belongs on my web site. You built it quick.

Never mind, the wing position looks fine. The picture I was looking at is distorted.

James
May 17, 2009, 02:13 PM
Dutchdawgs Daddy
Wake_T's Avatar
I maidened it just a few minutes ago, and it fly's great.
Flew behind my house on a small playground, a bit confined area, but I made 2 take-off's and landings, that baby can go slow.
Up for the night flights!
What did you mean James with the wing position?
The fwd wing saddle is at 5.5 inch from the front.
Jun 16, 2009, 07:36 PM
Registered User
Maidened mine today, LOVE IT. Flew it 4 times. What floats should be used on it?
Jun 16, 2009, 08:23 PM
jkarpy's Avatar
Quote:
Originally Posted by Kansas
Maidened mine today, LOVE IT. Flew it 4 times. What floats should be used on it?
I use the multiplex floats with two pair of X-Gear. Should be some pictures on this thread.

James
Jun 16, 2009, 08:25 PM
jkarpy's Avatar

SSX on Floats


Here is a thread:

https://www.rcgroups.com/forums/showthread.php?t=813179
Jul 14, 2009, 11:46 AM
jkarpy's Avatar

Last ARF in stock


Bobs Hobby center has one yellow SSX ARF in stock. You need to call to order.

407-277-1248
Jul 15, 2009, 04:35 PM
jkarpy's Avatar

Trailing edge bevel


This picture should clear up any question of how to prepare the trailing edge (W3) crutch. The crutch is tapered to a feather before the 1/16" X 3/4" sheeting is applied. This method deviates from the build video and improves the quality of the trailing edge.

James
Last edited by jkarpy; Jul 21, 2009 at 03:27 PM.
Jul 15, 2009, 04:48 PM
Registered User

I still can't see how to do the trailing edge


The engineering diagram shows that tabs that I cut off.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Quick build Slow Stick mattyfly4fun Foamies (Scratchbuilt) 14 Feb 18, 2013 12:12 AM
Discussion Will this Slow Stick build "work"? chapped Beginner Training Area (Aircraft-Electric) 36 Mar 08, 2010 07:29 PM
Discussion Help me with a brushless Slow Stick build chapped Beginner Training Area (Aircraft-Electric) 10 Jan 13, 2010 12:27 PM
Sold Millenium X-gear Carbon Fiber Landing gear for Slow Stick Scirocco14 Aircraft - General - Miscellaneous (FS/W) 2 Jan 11, 2010 11:38 PM