SLOW-STICK X Build - Page 55 - RC Groups
Thread Tools
Jan 16, 2008, 08:15 PM
Hodgehound # 3
_Lunchbox_'s Avatar
need me to help out?
Sign up now
to remove ads between posts
Jan 16, 2008, 09:15 PM
YardGoat lives with mama
Sure. You can do that after you help me unwarp my wing where the aileron sits.
Jan 16, 2008, 09:29 PM
Did you get it on video?
Flying-Monkey's Avatar
have you covered it yet bry?

you can remove warp with an iron
Jan 16, 2008, 09:37 PM
YardGoat lives with mama
You are correct. Yes it is covered, but I need an extra set of arms. The warp is pretty significant
Jan 17, 2008, 05:40 AM
Did you get it on video?
Flying-Monkey's Avatar
I'll be right up...
Jan 17, 2008, 07:38 PM
Hodgehound # 3
_Lunchbox_'s Avatar
sorry I got called away today Bryan... Maybe we can meet tomorrow or something
Jan 17, 2008, 08:44 PM
YardGoat lives with mama
Give me a call. Tomorrow works out good for me.
Jan 18, 2008, 03:58 PM
YardGoat lives with mama
Small setback. As I mentioned before I had a significant warp where the aileron was going to join with the wing. I brought the wing with me to Hodges today. Bill and Mac informed me that we could not heat it out becuase I already had the covering on pretty tight. Instead of taking all the covering off and heating it out, they recommended I make a long hinge slot where the warp was, fill it with wood glue, then clamp it straight. When the glues dries hopefully the wing will be straight. Here are a few pictures after I clamped it.
Jan 18, 2008, 05:47 PM
End of an Era.....
Tha Hodgehound's Avatar
That should work! Musta been pretty bad.
Jan 18, 2008, 08:48 PM
Hodgehound # 3
_Lunchbox_'s Avatar
sorry I couldn't be of help dood. The job sometimes has unexpected moments...
Jan 18, 2008, 08:50 PM
YardGoat lives with mama
You are a big bully. Thats ok. I have the wing done. I used hinge tape instead of CA hinges. I might go back and install the hinges since I do not like the way it looks with tape.

I decided to cover the wings with the same monokote I used on the wing. The CF Ultrakote was too heavy for me to manipulate around the curves.

It looks good. Pictures tomorrow
Jan 18, 2008, 08:52 PM
Hodgehound # 3
_Lunchbox_'s Avatar
I am big. that is no secret...

I'll be getting G3.5 soon. Then I can fly the SSX any time I want
Jan 19, 2008, 04:33 AM
Not your average DiggsyBear
Diggs's Avatar
J, I am no small feller either... However I say go spend your cash on Reflex XTR. We really need a SSX for that. XTR is much more realistic IMO. G3.5 aint bad, but XTR spanks it IMO.

Looking forward to meeting all of you guys at SEFF. I should be there the Saturday prior to the start. Likely watch during most of the actual event and fly Sat~Weds. And spend most all my money with James once he arrives! I want a Bipe in the worst way!!!

Hoping to be the first to provide a full blown review of the bipe
Jan 19, 2008, 10:07 AM
Hodgehound # 3
_Lunchbox_'s Avatar
I mainly wanted to get the 3.5 due to being able to do a virtual fly in with my online buds at wattflyer . However, I may look into one if the price is right.
Jan 20, 2008, 11:02 AM
YardGoat lives with mama
Complete. Here are a few bad pictures of the SSX Night Sticky Rip Off.
She is powered with a Scorpion 2215-22 motor, a Scorpion 25A esc, ar6100 rx, 4 HS-55 servos, 3s1320 TP lipo and a APC 10x7 SF prop.
Data is 14.8 A static, 145W, and she weighs a hefty 22.3oz, but carries 20 8,000 mcd LEDs

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Quick build Slow Stick mattyfly4fun Foamies (Scratchbuilt) 14 Feb 17, 2013 11:12 PM
Discussion Will this Slow Stick build "work"? chapped Beginner Training Area (Aircraft-Electric) 36 Mar 08, 2010 06:29 PM
Discussion Help me with a brushless Slow Stick build chapped Beginner Training Area (Aircraft-Electric) 10 Jan 13, 2010 11:27 AM
Sold Millenium X-gear Carbon Fiber Landing gear for Slow Stick Scirocco14 Aircraft - General - Miscellaneous (FS/W) 2 Jan 11, 2010 10:38 PM