Thread Tools
Old Jan 01, 2012, 07:20 PM
pwhavens is offline
Find More Posts by pwhavens
Registered User
pwhavens's Avatar
Quote:
Originally Posted by jkarpy View Post
Looks great!

I recommend moving the wing forward until inverted flight requires no elevator input. This will also improve pitch sensitivity. Rite now you are too short coupled. CG can be as much as 1" aft-spar.

James
OK, I moved the wing forward about 1/2 inch. Now, it inverts & stays level trimmed. In normal flight when I throttle off, it noses up until it slows then noses down. A friend says I need down thrust (engine pointed downward). What do you think?
P
Sign up now
to remove ads between posts
Old Jan 01, 2012, 08:49 PM
jcfetterly is offline
Find More Posts by jcfetterly
Unemployed, Homeless, Happy
Thanks Quando, but the picture doesn't show the wrinkled wing tips as they really are.
Old Jan 15, 2012, 03:49 PM
Dana Pt Dave is online now
Find More Posts by Dana Pt Dave
Driven by Passion!

Final Build and Maiden Flight


James,

Thanks for building one of the best kits I have ever put together! The work you did made my work so much easier. Attached are a couple of pics of my finished SSX. It's built with lights to fly at night.

motor: 2217/7 250 watt
Prop: 10x4.7
ESC: 30 amp
Battery: 1300mah 3 cell
AUW: 22oz

Maiden flight part 1, pilot error, forgot to check control surface movement minor damage, broke motor mount, lost front wing saddle (P11).

Maiden flight part 2, happened last night at dusk. Once trimmed, she flew very nice. super soft landings. Had to add a lot of up trim. I think my P11 balsa replacement has the wing incidence off. James, I need a replacement for P11 or the right measurements to cut a new one.

I am looking forward to many night flights with my SSX.
Old Jan 16, 2012, 07:45 PM
DaDesign is offline
Find More Posts by DaDesign
ɹǝsn pǝɹǝʇsıƃǝɹ - inverted!
DaDesign's Avatar
Nice job on your SSX. I like the color scheme and the built in lights.
Old Feb 11, 2012, 10:32 AM
PittSpecial is offline
Find More Posts by PittSpecial
Right Rudder
PittSpecial's Avatar

Translucent Yellow Covering


Oh James

Do you know where O where I can get the Translucent Yellow Covering?

My 3+ year old Slow Stick-X really needs a re-cover job.

Let me know where and I bring the CASH!!

Regards,
Carlos
Old Feb 11, 2012, 11:08 AM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by PittSpecial View Post
Oh James

Do you know where O where I can get the Translucent Yellow Covering?

My 3+ year old Slow Stick-X really needs a re-cover job.

Let me know where and I bring the CASH!!

Regards,
Carlos
If you want to recover your SSX, I would do it with the new Ultracote park lite or ultracote lite. Ultracote lite would be the tranlucent yellow.

I am e-mailing you my new address.
RCG Plus Member
Old Feb 17, 2012, 09:01 PM
Manta1 is offline
Find More Posts by Manta1
OOPS
Manta1's Avatar
James,am I gonna see you in Perry?
Old Feb 18, 2012, 01:04 AM
ckreef is offline
Find More Posts by ckreef
Registered User
ckreef's Avatar
I talked to James a few weeks back and yes they will be at Perry this year. They are going to be at their original booth location NOT the location they had last year.
Old Feb 20, 2012, 11:36 AM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by Manta1 View Post
James,am I gonna see you in Perry?
No, I just moved. Regrettably, I decided to skip Perry and SEFF this year. Just not enough time to get my shop put back together and prepare for the two events. I am going to shoot for the fall events.

James
RCG Plus Member
Old Feb 20, 2012, 11:36 AM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by ckreef View Post
I talked to James a few weeks back and yes they will be at Perry this year. They are going to be at their original booth location NOT the location they had last year.
Had to cancel. Sorry guys!
RCG Plus Member
Old Feb 20, 2012, 09:58 PM
ckreef is offline
Find More Posts by ckreef
Registered User
ckreef's Avatar
Quote:
Originally Posted by jkarpy View Post
Had to cancel. Sorry guys!
Really sorry to hear that. Was hoping to bounce some ideas off you at the swap. Will call at some time and bounce those ideas as I have a few things I want to do with your planes.
Old Feb 25, 2012, 08:38 AM
DaDesign is offline
Find More Posts by DaDesign
ɹǝsn pǝɹǝʇsıƃǝɹ - inverted!
DaDesign's Avatar
Quote:
Originally Posted by jkarpy View Post
No, I just moved. Regrettably, I decided to skip Perry and SEFF this year.
James
If you're not going then I may not go as well.
Old Feb 26, 2012, 09:00 AM
jkarpy is offline
Find More Posts by jkarpy
jkarpy's Avatar
Quote:
Originally Posted by DaDesign View Post
If you're not going then I may not go as well.
Thanks but don't miss-out on the fun because of me.
RCG Plus Member
Old Feb 26, 2012, 12:03 PM
Tram is offline
Find More Posts by Tram
Fly it like you stole it..
Tram's Avatar
Quote:
Originally Posted by jkarpy View Post
No, I just moved. Regrettably, I decided to skip Perry and SEFF this year. Just not enough time to get my shop put back together and prepare for the two events. I am going to shoot for the fall events.

James

We had to skip Perry this year as well. Plan to be at SEFF though.
Old Mar 14, 2012, 02:55 PM
eMoon is online now
Find More Posts by eMoon
I meant to do that
eMoon's Avatar
Hi all,
Maiden flight of my SSX yesterday was wonderful! I don't have pics as of yet. For one, I was by myself, and two, I'm not very proud of my covering job. My first time at it and it didn't quite come out as planned. But that can be changed as I'm sure a crash will be future so when repairs are needed, I can update the covering.

She flew OK but I needed a lot of up elevator to fly level, even though she is balanced about 1" behind the wing spar. DO you gents think I should let her be a bit tail heavy with the COG for level flight or is there something else maybe going on? Other than that, I have throws dialed down on the ailerons and elevator as I'm a beginner. I still have full rudder throws in play. She was nice and docile and very comfortable to fly, other than needing up elevator as I said.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Build Log Quick build Slow Stick mattyfly4fun Foamies (Scratchbuilt) 14 Feb 18, 2013 12:12 AM
Discussion Will this Slow Stick build "work"? chapped Beginner Training Area (Aircraft-Electric) 36 Mar 08, 2010 07:29 PM
Discussion Help me with a brushless Slow Stick build chapped Beginner Training Area (Aircraft-Electric) 10 Jan 13, 2010 12:27 PM
Sold Millenium X-gear Carbon Fiber Landing gear for Slow Stick Scirocco14 Aircraft - General - Miscellaneous (FS/W) 2 Jan 11, 2010 11:38 PM