Thread Tools
Sign up now
to remove ads between posts
Jun 09, 2007, 02:32 PM
Registered User
Nothing SLOW about that brushless video, damn!
Jun 11, 2007, 06:03 PM
Account closed
This is a wonderful model creation and I would say that should someone like to keep the stock motor setup for whatever reason...and not go with today's ever decreasing cost of brushless then, consider buying a lower Brushed motor/gearbox combination such as 3.75:1 ratio (A grearing) assuming we are talking about the EPS-300C power system which is essentially a Mabuchi 370, 7.2Volt motor. (The GWS EPS-350C are Mabuchi 370, 6Volt motors with higher Kv and thus higher Amp draw). Of course this is using 8-cells, AAA-size Ni-MH's for those that are daring to be completely Stock

http://www.aeromicro.com/Catalog/gws...as__803625.htm

Your airspeed would increase with a 8X6 propeller so, you would need to fly her on the wing as you will not have the thrust to do 3D. It would be strickly a Sport Flyer model with this power setup.

However, for those that like to use 3-cell, Li-POLYs then, I would consider this GWS power Stock related setup:

http://www.aeromicro.com/Catalog/gws...bs__803626.htm

and continue to use the smaller 8X6 propeller for even better results in performance out of a Brushed - geared setup.

You might find these in local hobby stores on Sale so, look around.

Carlos


Quick Reply
Message:

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Video AP2000i heli stabilizer demo flight Tonystott Electric Heli Talk 2 Sep 28, 2006 01:06 AM
Discussion RCAPA VFE - A Demo flight Joe Bennett Aerial Photography 75 Aug 11, 2006 11:35 PM
Discussion RCAPA VFE - A Demo flight comments Joe Bennett Aerial Photography 0 Apr 24, 2006 11:36 AM
Discussion Quique Somenzini's demo flight - saturday jbourke E-Fest - Hosted by Great Planes 5 Feb 18, 2006 01:14 PM
Demo Flight*Great Planes Turmoil*~~Video~~ speeddemon281 3D Flying 10 Nov 10, 2005 06:08 PM