Just bought a used Windex glider, Looking for more info on it (CG...) - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
Feb 17, 2007, 06:07 PM
Watts Rule, Glows Drool
dogon1013's Avatar

Just bought a used Windex glider, Looking for more info on it (CG...)

I saw this model hanging from the cieling of my LHS and I fell in love with the design and had to have it. 8ft (96") winspan, plenty of room in the fuse (for a videocamera, maybe) and what looks like a very aerodynamic fuse profile.

It appears that the model was brought over from the UK by the current hobby shop owner, a long long time ago. Not sure who makes the model, or where the CG is supposed to be.

Anyone out there have any experience with this model?

I found some other windex glider models when doing a search here, but those all seemed to be T-tails, this one has the elevator in the center of the rudder.
Sign up now
to remove ads between posts
Feb 17, 2007, 07:43 PM
Watts Rule, Glows Drool
dogon1013's Avatar
got a little more info. I just found the manufacturer's name "molded" into the right side of the rudder:

Teltech and H.A.M. model

a quick Google search didn't find anything.
Oct 04, 2007, 02:22 AM
Registered User
Beerke's Avatar
center of gravity is 65mm behind front of wing.


Good flights
Jul 15, 2008, 11:48 AM
Registered User
Beerke's Avatar

Here are some pictures from the frist flight of the Windex

I put in a Brushless motor and A 8x6 prop, with a 3S 4000mA (that I use for other planes too) I did not get to the bottom of my batterie and made flights for more then 45 minutes !
Great plane !

Good flights,
Jul 15, 2008, 08:29 PM
Watts Rule, Glows Drool
dogon1013's Avatar
I haven't tried any flights that long, but it is a nice plane. I don't have a wheel on mine but it has enough power to skid on the grass runway and takeoff without one.

Do you have any close up pictures of yours, I like the red strips on yours. It's allways good to be able to see the plane way up in the sky.
Jul 17, 2008, 08:29 PM

Think I'm using a Phasor and a 8x6 prop

Jul 17, 2008, 10:15 PM
Watts Rule, Glows Drool
dogon1013's Avatar
Speed-E...What brand of ESC and reciever are you using???

Seriously though, that looks like it's easy to see which side is up.

Here's what I did to mine, just a little color.
It's got a Rimfire 35-30-1450kv, a 9*6 prop, a CC35 ESC and I use a 4800mah 3S pack.
Last edited by dogon1013; Jul 17, 2008 at 10:27 PM.
Jul 17, 2008, 10:29 PM
Watts Rule, Glows Drool
dogon1013's Avatar
how are you guys holding the wings on the fuse?
I'm just using tape, but I think it has hooks for a rubber band or something.
Mar 21, 2016, 03:36 PM
Registered User
Just tape is fine. Use that on all my moulded gliders. Closes the gap completely.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Looking for pics/info on the old DAM warbirds. Brian Courtice Slope 116 Oct 31, 2017 05:14 PM
Discussion Looking for Pics/info on Gull by K Kuosma Airboatflyingshp Waterplanes 168 May 03, 2016 01:28 PM
Question Looking for Build info on Dare F9 Panther Monty5 Electric Warbirds 0 May 17, 2006 09:27 AM
Im looking for some info on the MPJet Red FlinVR Foamies (Kits) 0 Jul 15, 2004 04:46 PM