Help Please! Sorted-see my last post!! - RC Groups
Thread Tools
Feb 14, 2007, 12:31 PM
Kiss the Sky
electriceye's Avatar

Help Please! Sorted-see my last post!!

I did have a problem but have managed to sort it out.
Last edited by electriceye; Feb 14, 2007 at 01:23 PM. Reason: Sorted my problem out!
Sign up now
to remove ads between posts
Feb 14, 2007, 01:00 PM
Glow Free Since Aug, 2005
tommy321's Avatar
Are you sure your crystals are correct?

I just looked up at and they show Channel 69 Crystals as 75.570MHz. (not 35MHz)

The receivers and transmitters also tend to be fairly brand specific when it comes to crystals. Are you sure your receiver crystal is compatible with the ESky receiver?
Feb 14, 2007, 01:06 PM
I used to use a 6EXA with one of these esky RXs, and never had a problem, the only thing I can think it might be is that you have the servos plugged into the RX the wrong way, unplug them, rotate the black connector 180 degrees, and plug back in, if that doesn't fix it, switch them back again, and wait for some more replys.

About the crystals, here in the UK we use totally seperate set of channel numbers for 35mhz, you can get channels 55 - 90.
Feb 14, 2007, 01:10 PM
Kiss the Sky
electriceye's Avatar
Wow thanks for the quick response-As you have been so kind I will have to admit to my error-Had RX crystal in TX and vice versa ( I was kinda hoping I could get away without admitting that!) Sheesh!!! All ok now thanks, just got to fathom out all this Expo programming etc!!! Many thanks again, I feel really dumb!!!
Feb 16, 2007, 07:36 PM
Registered HotGlue Addict
chaosMurphy's Avatar
re spit tiled pdf
check your PM.

Feb 18, 2007, 10:17 PM
Registered HotGlue Addict
chaosMurphy's Avatar
Get back to me on PM and/or here, your choice.
If this file gets in the 'way' here I will pull it off.
Feb 19, 2007, 05:30 AM
Kiss the Sky
electriceye's Avatar
Many Thanks-I will post it in the plans section in case there are others who want to use it also-I have saved it to build when I have another project out the way.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help I can't see my plane any more! Mr B.... Thermal 7 Nov 01, 2007 12:37 PM
Thanx Everyone...My last post for awhile ratman Electric Plane Talk 5 Oct 01, 2002 08:56 PM
Twinstar 4 Sell - See my other post kjkish Foamies (Kits) 0 Apr 26, 2002 02:04 PM
might have put my last post in wrong area Razor real slow kushal_22 Foamies (Kits) 1 Mar 27, 2002 07:20 PM