I need some help with a BEC/ESC LiPo Setup for my easyglider
I have purchased an easyglider and plan on using the stock 400 brushed motor. I will have 6 servos in the plane:
2 x Hitec HS-81 Micro Servo U
2 x Hitec HS-55 Economy Sub Micro Servo
1 x HS56 with Karbonite gears
1 x HS85 with Metal gears
I will also be using the Futaba R319DPS Synthesized 72mHz PCM Receiver.
I want to run everything off of one 2S, possibly 3S, LiPo (Lithium Poly) battery.
Here are my questions taking into consideration I know next to nothing of how to implement a BEC/ESC.
1) If I use the stock 400 brushed motor, how should I setup the ESC/BEC? Setup specifications and actual product names would be a big help.
2) What if I was to go with a 400 brushless 4D, 6D, 8D motor, what setup should I use?
3) Which exact LiPo battery would you recommend? How many volts, mAh, and a 2S or 3S?
Thank you very much for helping me with this, I have been scouring these message boards and have been entirely unable to find out how to do this.
Last edited by Auric; Feb 09, 2007 at 11:59 AM.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Need some help with Hitec ESC||rtn9105||Hitec/Multiplex USA||2||Aug 20, 2007 06:15 AM|
|need some help with upgrading my SS.||PCola-Flyer||Parkflyers||18||Sep 27, 2003 06:49 PM|
|Need some help with my GS400 ESC||VWtechie||Power Systems||0||Feb 18, 2002 01:51 PM|
|Need some help with my Starlite.||Lucas in Alaska||Parkflyers||10||Jan 30, 2002 11:45 AM|
|Need some help with my latest plane||wim5150||Electric Plane Talk||2||Aug 08, 2001 05:29 AM|