Thread Tools
Dec 03, 2009, 09:57 AM
Gone Flying.
ChrisWNY's Avatar
Those batteries would work perfect on a lot of FunJet setups, including the one I mentioned. I find that 3S 1800-2500mAh 20-40C all work very well all-around for FunJets.

If you're on a budget, HobbyCity's Turnigy motors would work well. Check that FunJet thread as I know there are many running Turnigy inrunners and outrunners in their FunJets.
Sign up now
to remove ads between posts
Dec 03, 2009, 09:59 AM
Registered User
Quote:
Originally Posted by rcnewb
Those batteries would work perfect on a lot of setups, including the one I mentioned. I find that 3S 1800-2500mAh 20-40C all work very well all-around for FunJets.
Thx for your prompt reply......I will look through the thread and decide....out of curiosity...what is your setup?

Thx
Dec 03, 2009, 10:22 AM
Gone Flying.
ChrisWNY's Avatar
I have 2 FunJets, the yellow/black FunJet as my avatar is setup as follows:
28-37-2 ARC motor w/5.5x4.3 Graupner CAM speed prop, 45-Amp CC Phoenix ESC, typically I use 3S 2200mAh 30C packs with this, it's fast, > 100mph top speeds, 21-22 oz. AUW. Max power draw is about 43 Amps WOT.

The other FunJet is powered by a MicroDAN 2505 Speed outrunner on a 5.5x4.5 APC prop. It is lighter at 18 oz. AUW, flies fast (nearly 85-90mph), and hand launches without effort. It's a very good setup, about 33-34 Amps max power draw, IMO, great for all-around flying.
Dec 10, 2009, 01:44 PM
Registered User
hello . i saw the film of ( FunJET Pusher Prop High Speed Jet ). i want to buy it . i want to know the prices of kit and details ( 300 watt 28mm inrunner brushless motor, 35 - 40 amp speed control, 4.75 x 4.75 prop, 3S 2500 mAh LiPo battery, 2 HS-65HB servos, Mini 6S or Neutron 6 receiver , Radio Controlled ) so that it complete and ready to fly .
tank you
Dec 10, 2009, 11:38 PM
Fly it like you stole it!
ODUsurfer's Avatar
How does the Funjet measure up to, say, a PZ Stryker?

I've been thinking of getting a speedy jet sorta plane, but would like to get something that slows down real well too. I was thinking of building a Stryker, but of course I'm checking out my options.
Mar 10, 2010, 02:32 PM
Registered User
Well if you do maiden i recommend use v-tail mixer and gyro for stabilizing the ailerons
Jun 19, 2010, 03:14 PM
Pro Bro # 2398
GassPasser's Avatar
dusting off The FJ. i feel the need for speed..
Sep 21, 2010, 10:22 AM
QuAd FaNaTiC
Razors edge 29's Avatar
I see horizon now has radio ready Funjet
Does that mean that all that's needed is an RX?


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Stevens Aero Groove Aerobatic Park Flyer Lasercut Kit Review Christine Electric Plane Talk 11 Aug 31, 2016 11:59 AM
Discussion Multiplex Fun Jet tIANcI Pusher Prop Jet Models 12 Oct 16, 2008 11:30 PM
Twinkle - amphibious park flyer - foam? theKM Foamies (Kits) 44 Oct 20, 2005 01:12 AM
GWMP Delta Jet Park Flyer Robert Wick Parkflyers 1 Apr 01, 2004 11:30 AM
GWMP Delta Jet Park Flyer Robert Wick Electric Ducted Fan Jet Talk 0 Mar 31, 2004 03:24 PM