Thread Tools
Dec 13, 2008, 01:02 AM
Registered User
Yup - its 25mm to 30mm measured from the LE where the wing angle changes.
Note not fwd - from LE back.
Does that make sense ?
Sign up now
to remove ads between posts
Feb 10, 2009, 09:06 AM
Registered User
Is a 4 Ch receiver sufficeint to operate the FunJet? Why they recommend 6 Ch?

2 channel for 2 servos, one for ESC, total is 3 Ch, why do they need a 6 Ch receiver?
Feb 10, 2009, 09:36 AM
"Have Glue - Will Travel"
dawnron1's Avatar
Quote:
Originally Posted by toyheli
Is a 4 Ch receiver sufficeint to operate the FunJet? Why they recommend 6 Ch?

2 channel for 2 servos, one for ESC, total is 3 Ch, why do they need a 6 Ch receiver?

A 4-channel receiver would work fine as long as your radio has elevon mixing. Just plug your servos into aileron/elevator channels.

Ronnie
Apr 06, 2009, 03:14 PM
Electric flight addict
Hay Guys,

Need your expertise on this one... I decided that instead of a in-runner motor, I would go with a high Kv out-runner instead. I talked with the lhs and they said it should work fine... just wondering on the mount?? any ideas. Thnks.
Apr 18, 2009, 11:52 PM
Suspended Account
Bilbobaker's Avatar
Where is the best online place to get one?

How do they compare to the Park zone Stryker, I can get those locally.
Apr 19, 2009, 02:54 AM
BLANIK213
blanik213's Avatar
Try justgofly.com or innov8tivedesigns.com
Jun 03, 2009, 11:07 AM
Mad Scientist Matt
Abzauris's Avatar
Question... I still have my Neu 1105/3.5Y motor, but i upgraded to a 60 amp esc and now running 2200 4s 30c lipo... what prop do you think would be best with this setup? Thanks for the help!
Jul 06, 2009, 04:01 PM
Duck Fan
great review. I finished my fun jet today and hope to maiden it tomorrow. I had some trouble lining up the motor to have the thrust line be at zero, so i used 2 washers as shims between the motor mounting plate and the mount itself, and was able to get it to line up. i thought i would pass that along to all whom might have the same problems.
Jul 25, 2009, 01:27 PM
WrongRudderR/C
FlattyFlier's Avatar
Im really looking for some speed here, but I am on a budget. Could you guys tell me if this is a good setup, because its at a great price!

http://www.graysonhobby.com/catalog/...roducts_id=463
Jul 30, 2009, 12:00 AM
Posse Member
Eddie.C's Avatar

ESC Location???


Where is the best location to mount ESC? I got a used FJ and dont know where to mount it? Need to mount RX too. Help!
Nov 09, 2009, 10:20 PM
Random Flier

Nice Review!


Just assembling a FJ at the moment, using Stryker innards...

1. Boy oh boy those motor mount screws are way overkill! Unless maybe you are putting 2000W through the motor mount (and I'd guess you'd be overcoming the integrity of the foam at those power levels!)

2. Decals. Probably I missed something, 'cos the instructions I have say something like "refer to box artwork for decal placement"... and then the box has no picture of the underside! No big deal, of course...

3. Stryker innards: not too bad:
- Stryker servos are more HS81 sized, so I cut out the foam to fit them. In retrospect I might have gone for new, smaller (HS56Bs or equivalent) servos so the servo covers fitted to the moulded outline. I placed mine with a spot of hotglue...
- Stryker brushless motor only had 2 holes match the motor mount - should still be OK.

In terms of original packaging, I'd have expected Multiplex to get an award for such an efficient way of packing foam parts in the smallest space with most protection. Very neat!
Nov 18, 2009, 07:49 AM
Never Stop Learning
Jaguar22's Avatar
My current power setup:

MicroDAN 2505 SPEED 2800 Kv
Turnigy 60 amp ESC
FlightMax 40C 2200 mah lipo
Prop - APC E 6x5.5
AUW - 23 oz.
Hitech HS-85MG
Last edited by Jaguar22; Nov 18, 2009 at 10:52 PM.
Dec 03, 2009, 09:36 AM
Registered User

Common Setup for the Fun Jet


Hi all

I'm plannig on getting myself one of these and was wondering what the most common setup would be? Also, in terms of servos would the Hextronik HXT900 9gr micro mini work? or would you recommend others?

I asked for "most common setup" as I'm not looking for overkill or blistering speeds. It would be my first plane in this speed cat !

Been flying scale and 3D's so far !

Thx
Dec 03, 2009, 09:44 AM
Gone Flying.
ChrisWNY's Avatar
G4ORCE -

Your question is probably best answered within the popular FunJet thread, where all sorts of setups are discussed in detail.

https://www.rcgroups.com/forums/show...74757&page=279

As fair warning, some of the more recent posters in that thread are insistent on high-speed only setups (Moparmyway being one of those posters), which means higher investment in your components, as well as stressing/pushing components to their limits that can cause early component failure, so don't take their posts with anything other than a grain of salt.

A good overall/common setup that will keep the weight light and give you a solid power:weight ratio would be a MicroDAN 2505 Speed outrunner on a 3S LiPo pack and 40 Amp ESC. HXT900 servos would probably work ok as long as the speed was kept under control. At high speeds, a lot more force is required by the servo which could result in HXT900 gear stripping during flight and causing a crash.
Last edited by ChrisWNY; Dec 03, 2009 at 09:59 AM.
Dec 03, 2009, 09:52 AM
Registered User
Quote:
Originally Posted by rcnewb
G4ORCE -

Your question is probably best answered within the popular FunJet thread, where all sorts of setups are discussed in detail.

https://www.rcgroups.com/forums/show...74757&page=279

As fair warning, some of the more recent posters in that thread are insistent on high-speed only setups (Moparmyway being one of those posters), which means higher investment in your components, as well as stressing/pushing components to their limits that can cause early component failure, so don't take their posts with anything other than a grain of salt.

A good overall/common setup that will keep the weight light and give you a solid power:weight ratio would be a MicroDAN 2505 Speed outrunner on a 3S LiPo pack and 40 Amp ESC. HXT900 servos would probably work ok as long as the speed was kept under control. At high speeds, a lot more force is required by the servo which could result in HXT900 gear stripping during flight and cause a crash.
I will check the thread....thank you for pointing me in the right direction. a quick question on LiPo...I currently have a Turnigy 2200mAh 3S 20C 30C burst and a flightmax 2200mAh 3S 20C......would these work or would I need to buy new LiPo's

Thx


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Article Stevens Aero Groove Aerobatic Park Flyer Lasercut Kit Review Christine Electric Plane Talk 11 Aug 31, 2016 11:59 AM
Discussion Multiplex Fun Jet tIANcI Pusher Prop Jet Models 12 Oct 16, 2008 11:30 PM
Twinkle - amphibious park flyer - foam? theKM Foamies (Kits) 44 Oct 20, 2005 01:12 AM
GWMP Delta Jet Park Flyer Robert Wick Parkflyers 1 Apr 01, 2004 11:30 AM
GWMP Delta Jet Park Flyer Robert Wick Electric Ducted Fan Jet Talk 0 Mar 31, 2004 03:24 PM