Thread Tools
Jan 05, 2007, 06:55 AM
CAMOMAN
Discussion

Stronger Landing Gear for GWS Mini DF


I am wondering what you guys use for a stronger set of skids on the gws mini dragonfly that are also easier to change than the OEM's that come from GWS. The carbon fiber rods seem to break pretty easy on a hard landing. I have been putting a little drop a CA glue on the wedge and repairing the set but man they are hard to get back apart if they break....any suggestions...

Thanks,,
Sign up now
to remove ads between posts
Jan 05, 2007, 07:02 PM
The Great Santini
Santini's Avatar
See later posts in this thread. My input is post #18.

https://www.rcgroups.com/forums/show...hlight=santini
Jan 05, 2007, 07:47 PM
Team Mulikow
Gino CP's Avatar
All skids break. Even Superskids. They weight the heli downand decrease flight time. because of the boom support, the boom may break at the support joint on tail impacts.

I assume you are starting out since you are breaking skids. Bend wire twice the shape of a right angled U. Insert like they were skids. The wire bends on impact absorbing energy. Bend them back to shape. When you get better you ditch these trainers and go back to stock skids.

You can try Blade CP skids. They seem to be tougher.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Landing Gear for the GWS Mini Dragonfly Heli CAMOMAN Micro Helis 3 Apr 20, 2007 06:37 PM
Idea Experimental landing gear for gws mini DF seric Micro Helis 11 Mar 03, 2007 09:26 PM
Wanted need landing gear for the gws A-10 adrian52492 Aircraft - General - Miscellaneous (FS/W) 2 Feb 05, 2006 03:44 PM
Help! Tail ESC for GWS mini DF Sean Witte Micro Helis 7 Jan 17, 2006 09:48 PM
Rave Landing Gear for GWS Corsair jedville GWS (Grand Wing Servo) 5 Dec 10, 2005 11:04 AM