Thread Tools
Jul 26, 2001, 07:36 PM
Tu ne cede malis
MtnGoat's Avatar

Can a folding prop be used in pusher config?

I'm scratch building a slope/electric Cutlass. Can I use a folding prop as a pusher? Do I just buy a stock one and reverse the blades or something?

I realize I may have to reverse the motor, but I have no experience at all with folding props so thought I'd ask you guys.

Sign up now
to remove ads between posts
Jul 26, 2001, 07:40 PM
Tu ne cede malis
MtnGoat's Avatar
And I also forgot to ask, any feedback on the reliability of the speed 600 3:1 gearbox Multiplex sells?
Jul 26, 2001, 09:44 PM
Registered User

Been running a Graupner 6x3 folder on my Zagi for months...just reverse the blades. You will need to put in a stop inside the spinner so the blades don't fold back over center (won't sling out when you hit throttle again, and vibrates like mad )I made my stops out of hard balsa, sanded to fit inside the spinner...just takes a bit of cut and fit.

Clear Skies

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Can lipo batteries be used in below freezing weather? Mat Batteries and Chargers 3 Nov 27, 2004 10:45 AM
Can a Futaba crystal be used in GWS receiver? eta Parkflyers 3 Aug 13, 2004 02:52 PM
Can 555 Rx be used in 40 size plane? billsmithjr Hitec/Multiplex USA 3 Jul 23, 2004 12:10 PM
Can BL Motors be used in RC Cars and Trucks? Rogerdoger Power Systems 6 Jan 04, 2004 04:32 PM
Can a Marine/RV battery be used in a car? Ben74 Power Systems 13 Jan 31, 2002 01:34 AM