Thread Tools
This thread is privately moderated by tim_mellor, who may elect to delete unwanted replies.
Nov 09, 2006, 11:05 PM
Plays with Toys
tim_mellor's Avatar
Data

F3P Equipment Weight and Information


This is a resource sheet for fliers of light weight F3P or Light Indoor 3D planes (under 200g). With the large number of Servos and growing variety of ESC, Rx, Motors etc and the sometimes inaccurate data given by sellers or manufacturers maybe it is time to do our own.

Data prefered at this stage is "ACTUAL USER DATA" manufacturers of light weight equipment cheat about weights in particular wire weights and plug headers.

The attached Zip file is an excel spreadsheet, as it starts to fill up I will also place a PDF version here as well. Please feel free to post anything to add to the list here. This is not a dicussion thread and postings will be trimmed over time as the data is added to the chart.

If any of you want to add to the excel file then feel free

Tim
Last edited by tim_mellor; Feb 11, 2013 at 02:25 PM.
Sign up now
to remove ads between posts
Nov 12, 2006, 11:28 PM
GIMMIE FOAM!!!
AirNerd's Avatar
I just bought a Cyclon Micro...and it indeed weighs 27 G's
Nov 12, 2006, 11:30 PM
GIMMIE FOAM!!!
AirNerd's Avatar
I can also take 2 grams off HS-50s & 55s.
Nov 13, 2006, 03:44 AM
Plays with Toys
tim_mellor's Avatar
Hi All,

I have about run out of bits to add. Anyone got any other bits numbers or links to fill in the gaps please add them. Even if you think a particular item shouldn't be there post it and why not or if the item is a bit suspect for this use.

In particular can someone have a good look at the Futaba Rx and Servos, they have been poorly supported in Australia so very few people use them. JR Rules down under

thanks

Tim
Nov 13, 2006, 07:42 AM
Registered User
Aio_1's Avatar
Tim,

For the receivers it might be worth splitting the 35MHz/36MHz and 72MHz units into two groups as many types are only available in one or the other.
The following are all 35MHz (probably 36MHz too?)
Where 2 weights are shown they indicate: (Claimed weight/~measured weight).
My scales are only accurate to 1 gram thus the ~.

Receivers (35MHz)
Multiplex RX-5 (8g/~9g)
Jeti Rex 5 (8.5g)
ACT Pico 4 (4.5g/~5g with full size crystal) - I like this receiver!
ACT Digital 4 (5g with crystal)
MZK Penta (2.8g)
MZK Penta light (2.1g)
MZK Penta pro (4g)
MZK Quadra

Motors
MicroREX220-3-3200 (11g/~12g) - may be slightly high but scale error is 1g!
MicroREX220-6-1600 (21g/~21g)
MicroREX220-6-2000 (21g)

Cells
3s TP480 prolite (32g/~37g as supplied)
2s Hyperion 300mAh 20C (~19g with 40mm cable & micro deans)

ESC
CC ThunderBird 9 (8g/~9g)

Aidan
Last edited by Aio_1; Nov 13, 2006 at 07:56 AM.
Nov 13, 2006, 11:37 AM
Registered User
aglenn's Avatar
The best indoor combo for f3p that i have found is the Axi 2203 -47 Phoenix 10 2 Dog rc 2 cell 360 and a berg 4l
Nov 13, 2006, 06:11 PM
I'm goin' Falcon nuts
RCAV8R13's Avatar
I found this GIF on another thread. I hope I don't get in trouble for reposting it but it has a lot good info on what the "Pros" are using in Europe.
RCA
Nov 13, 2006, 06:50 PM
Intermediate Multi
Trisquire's Avatar
That's Jürgen's. He won't mind.

Tom
Nov 13, 2006, 07:02 PM
Plays with Toys
tim_mellor's Avatar
thanks RCA,

I used to have a few of those from earlier this year (posted here somewhere) but lost them along the way.

Tim
Nov 15, 2006, 02:15 PM
-(-<
Mister UHU's Avatar
Tim : this is such a useful thread.

Brilliant !!

Days of work, all done, what a time saver.


Now all that is needed is a popularity or personal rating index,
and any dummy can be an instant expert.

Thanks Tim !
Nov 16, 2006, 03:30 PM
Plays with Toys
tim_mellor's Avatar
Hi all,

Version 2.0 is underway. I will also do a PDF version along with that one. Should be done in a couple of days.

Still working on it work is getting in the way

Tim
Last edited by tim_mellor; Nov 28, 2006 at 11:04 AM.
Nov 21, 2006, 06:02 AM
Me likes Depron...
Pjotrrr's Avatar
Strecker website: www.rs-e-motoren.de
The 12 grams 195.03 motor is superior for F3P, but has a pricetag...

The Strecker is 1500kV, the MicroRex 3200kV and the NanoCyclon 1900kV.

Impressions here in Holland are the MicroRex does not have the pull out of the Strecker, maybe the 1900kV NanoCyclon is a better budget option.

www.mamo-models.com is selling the NanoCyclon too now and started advising this motor instead of the MicroRex for the new Manta kit....
Last edited by Pjotrrr; Nov 21, 2006 at 06:10 AM.
Nov 22, 2006, 11:39 PM
I'm goin' Falcon nuts
RCAV8R13's Avatar

New 17g motor from MP Jet


I found this at Icare. Looks promising. $45.00 and has two ball bearings.
http://www.icare-rc.com/mpjet.htm
RCA
Nov 23, 2006, 12:03 PM
GIMMIE FOAM!!!
AirNerd's Avatar

Cyclon Nano


I got robed!!! JOke Joke...you can delete me
Nov 25, 2006, 10:58 PM
I'm goin' Falcon nuts
RCAV8R13's Avatar
Quote:
Originally Posted by AirNerd
I got robed!!! JOke Joke...you can delete me
Take the O ring off. I'll bet it weights .2g.
RCA


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion E-Starter and equipment weight Fallout Beginner Training Area (Aircraft-Electric) 7 Jan 19, 2007 02:13 PM
Discussion EVO Size & Weight information wanted MrMel Batteries and Chargers 1 Aug 21, 2006 06:48 PM
Cool Buying Used Equipment - Weight the Risk aeajr Beginner Training Area (Aircraft-Electric) 4 Feb 21, 2005 04:53 PM