Thread Tools
Nov 01, 2006, 08:35 PM
Father Francis, formerly Apach
Thread OP

Father/Son Project changed to family project...

Just wanted to thank everyone who has contributed to this cause.....

Last edited by ApachePilot; Nov 26, 2006 at 02:59 PM.
Sign up now
to remove ads between posts
Nov 01, 2006, 10:01 PM
That'll hold until ...
swatson144's Avatar
I can kick in a old model T6XA Super if no body has a easier to work with transmitter. Does what is needed but a bear to program. No charger but if you have a futaba already that charger will work. Manual says it does 120 mixing and like 1 pt revo setting but that shouldn't matter with the HH gyro.

Not very familiar with it's heli functions as I've never used them. Negative shift chan 36.

Nov 01, 2006, 10:49 PM
Father Francis, formerly Apach
Thread OP

PM Sent

Nov 01, 2006, 11:09 PM
"Up Chuck-Up Chuck"
mdlifcrisis's Avatar
I thought the T6XA(H) did the 120 mix. I used to own one although I never used that feature.
Your Trex is boxed, shipping label attached. Will go out tomorrow USPS priority..
FWIW..The standard 450x did not have ccmp. This heli has a mod but included is the standard 90 deg swash. With a few control rod and servo placement changes you may not even need that program mix. I also dont have a 450x manual so you may need to search online (maybe from Align's site?) . The Hitec rx is neg shift for Futaba and has a ch 21 crystal installed.
Have fun!
Nov 01, 2006, 11:28 PM
expert heli pilot wanabee
siryan's Avatar
good work chuck very generous
Nov 02, 2006, 12:19 AM
Father Francis, formerly Apach
Thread OP
what can we say?.....

Chuck, we are forever in you guy's debt.
we will keep in touch

Nov 02, 2006, 12:45 AM
Heli Monger
eMeNeX's Avatar

Heliguy has a TRex manual available on the site.
Nov 02, 2006, 12:49 AM
Father Francis, formerly Apach
Thread OP
Nov 02, 2006, 05:00 AM
Oopss. Oh well.
borneobear's Avatar

Crash Ready - Spare Main blades

PM sent for your address. Some Gazaur main blades on the way to you - I wanted to send it back to Taiwan, but I think this is a better cause. They are good blades, balanced but not flown - will go very well with your Trex.

I'm in the far east, so it may take a while to arrive.

Good luck and take care.
Nov 02, 2006, 05:51 AM
Walkera 60 eCCPM!
I would donate something if I had anything to give...
Sorry, but all the best wishes!!!!!
Nov 02, 2006, 07:03 AM
That'll hold until ...
swatson144's Avatar
All righty then your T6XAs is on it's way Delivery Confirmation™ Label Number: 0103 8555 7498 4515 8512.

Nov 02, 2006, 08:34 AM
Father Francis, formerly Apach
Thread OP
Bless all of you.....we have been keeping a list of all persons who have answered this calling and we will keep you all in the loop.

Nov 02, 2006, 09:01 AM
"Up Chuck-Up Chuck"
mdlifcrisis's Avatar
Right on brother!
You should be getting enough stuff to keep you guys busy for awhile.
Have fun,
Nov 02, 2006, 12:29 PM
Victory is mine! BLAST!!!
jettvolks's Avatar
Micro stuff shipped out here is the tracking number.

0304 1560 0003 3311 0541

Have fun and hope they help keep the DF in the air.

Nov 02, 2006, 12:56 PM
Registered User
Pyrock's Avatar
Sorry Apache but I just found this thread and I want to pitch in. What else is needed to get this bird into the air?

Also, dont forget about spares as I'm sure junior may encounter a crash or two. I have a bunch of 315 and 325 blades that I dont use...some of which are brand new. I also have a Trex 400X tail belt that I bought by accident and is to short for my SE.

I will put together my "cant use" inventory and PM you with it.

I've seen my share of hard times (and still going through some).

Quick Reply

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Help! Delete please,post moved to father/son Project. ApachePilot Mini Helis 20 Nov 09, 2006 08:39 PM
Father and Son Dandys Navy Diver Parkflyers 21 Feb 18, 2003 01:22 AM
Nice article about a father and a son and the Marine Corps Mr Mootsie Life, The Universe, and Politics 6 Nov 30, 2002 09:17 AM
Father, Son, and Skeeter? Greg Covey Scratchbuilt Indoor and Micro Models 2 Apr 26, 2002 07:58 AM
E-Powered Motorcycle - Father & Son Project Buzz_Man Life, The Universe, and Politics 34 Jul 06, 2001 12:19 AM