Lumenier RB2205C-12 2400KV SKITZO Ceramic Bearing Motor
Thread Tools
Old Oct 28, 2006, 08:48 PM
derway is offline
Find More Posts by derway
Registered User
Discussion

combining data for different brands of motors


We need a way to track all the fantastic motor data in here, like they have done with batteries, in the "battery graph vault".

It would sure be nice to have a thread or 2, stuck at the top, for all the user supplied motor/voltage/prop/amps/power/thrust/rpm data here, rather than having to search and search and search...
Sign up now
to remove ads between posts
Old Oct 28, 2006, 09:17 PM
Nethole is offline
Find More Posts by Nethole
Registered Lurker
Nethole's Avatar
*cough* motocalc *cough*


http://www.motocalc.com/data/motor.html

http://www.motocalc.com/data/show.cgi?table=1

The right tool for the right job . . .
Old Oct 28, 2006, 09:30 PM
derway is offline
Find More Posts by derway
Registered User
Been using motocalc for years, but that isn't what I mean.

But motocalc says nothing about quality of motors, such as bearings, and how much heat the wire and magnets used by each motor can take, before permanent damage.
Old Oct 29, 2006, 12:23 PM
derway is offline
Find More Posts by derway
Registered User

What about replacement policies?


The problem really is that there are now far too many options available! You'd spend a lifetime tracking down the data for the vast majority of new motors which aren't in motocalc yet, and then running them all through.

Far better to have some generalizations, if we can figure them out.

I saw in another thread, that hobby lobby replaces broken axi motors for 1/2 price. Is this a general thing with hobby lobby - that they replace bad motors for 1/2 price? Or only axi motors?

Are there motor brands and/or vendors which are known for good/bad replacement policy?

How do hacker, himax, or eflite stand up this way?
Last edited by derway; Oct 29, 2006 at 12:33 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Data test data for MVVS electric motors Nico Peursum Power Systems 6 Apr 03, 2007 02:12 PM
Motocalc only has 6 himax motors. How do I get data for more. sheepy Power Systems 0 Jan 31, 2004 06:20 PM
why does my manual tell me my wing has a different CG for different motors? jeff262 Power Systems 2 Jan 27, 2004 08:29 AM
Data for Kyosho motors? Janzzon Power Systems 1 Oct 02, 2002 08:55 AM
How to select ESC for different sizes of motors? rick2048 Parkflyers 1 Sep 19, 2002 10:32 PM