Thread Tools
Aug 22, 2002, 01:54 PM
Registered User
Zhack's Avatar

Help with mixing please

I have a problem. I want to use my Hitec Flash 5 for a DLG glider in "glider" mode. L and R Ailerons are coupled as flaperons and these are mixed to elevator with camber control on the throttle stick. Rudder is as usual on ch4.

Throttle control is moved from throttle stick to a switch with 3 positions: -50%, 0, and +50% (used to give 0, 50, and 100% levels to ESC for a motor glider).

I want to use this throttle switch (ch3) as a preset switch to control the rudder (ch4) during launch, then flip the ch3 switch to neutral and use the left stick to control the rudder on ch4 as usual for flight.

Is there some kind of mixer I can use to accomplish this mix between ch3 and ch4?

Sign up now
to remove ads between posts
Aug 23, 2002, 08:22 AM
Model Designer
keven64's Avatar
I think you might need a fancier radio

Aug 23, 2002, 01:56 PM
Registered User
Unfortunately, there are no programmable mixes on the Flash 5, and what you're intending to do doesn't sound like a very common practice. At least, it's not common enough that there is likely to be a preset mix for it.

I'm thinking along the lines of an external mixer to get what you want without having to buy a fancier radio... Maybe an inexpensive Wattage elevon mixer with the servo reversing set properly would do what you want? The Wattage elevon mixer is less than $20. Just hook the mixer up to channels 3 and 4 on your receiver, and plug the rudder into one of the outputs.

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
help with smart please bpu6999 High Performance 12 Jul 11, 2003 02:25 AM
help with Wingo please sbaug Foamies (Kits) 25 Mar 24, 2003 11:10 AM
Help with motor please rorywquin Electric Plane Talk 3 Jun 12, 2002 04:02 AM