Thread Tools
This thread is privately moderated by RayH, who may elect to delete unwanted replies.
Sign up now
to remove ads between posts
Old Oct 04, 2006, 01:11 PM
gavoss is offline
Find More Posts by gavoss
Registered User
gavoss's Avatar
Thanks to everyone on the slope list, especially Ray for putting up with my insisant nature in getting these Macchi Fuses. I looked for over a year trying to find out who had the mold, if that person would make fuses, etc. It turns out Ray has the mold and my fuses are what you see. I'm pumped! gv
RCG Plus Member
Old Oct 05, 2006, 01:07 PM
gavoss is offline
Find More Posts by gavoss
Registered User
gavoss's Avatar
Ray, that's Awesome!! I'll be the only one in the midwest with a DC3 and Macchis! You are making my dreams come true, Thanks. gv
RCG Plus Member
Old Oct 05, 2006, 09:22 PM
nauga is offline
Find More Posts by nauga
Embrace the suck
nauga's Avatar
Ray, I'm cutting cores for George's DC-3 - d'ya think we can get the cores and the fuse shipped at the same time to save him a little $$$?

Nauga
Old Oct 05, 2006, 11:02 PM
RayH is offline
Find More Posts by RayH
Tuskegee Airmen; My Heros
RayH's Avatar
Quote:
Originally Posted by nauga
Ray, I'm cutting cores for George's DC-3 - d'ya think we can get the cores and the fuse shipped at the same time to save him a little $$$?

Nauga

ABSOLUTELY!
David, if you have enough foam, can you cut an extra set of cores or two. No center section, just left and right panels.
Ray
Last edited by RayH; Oct 06, 2006 at 01:48 PM.
Old Oct 06, 2006, 12:02 AM
gavoss is offline
Find More Posts by gavoss
Registered User
gavoss's Avatar
You guys ROCK! gv
RCG Plus Member
Old Oct 07, 2006, 12:53 AM
InTheLift is offline
Find More Posts by InTheLift
It could happen...
InTheLift's Avatar
Gotta love the Macchi. They just look fast!
Old Oct 07, 2006, 01:59 PM
gavoss is offline
Find More Posts by gavoss
Registered User
gavoss's Avatar
This is SO cool! I'll be the only guy in the midwest with a Macchi and a DC3. Ray is doing a Spitfire for me too but there are several spits here, though none will be 60" glass like mine. I'm seriously pumped!!!!! gv
RCG Plus Member
Old Oct 07, 2006, 10:55 PM
RayH is offline
Find More Posts by RayH
Tuskegee Airmen; My Heros
RayH's Avatar
Quote:
Originally Posted by gavoss
This is SO cool! I'll be the only guy in the midwest with a Macchi and a DC3. Ray is doing a Spitfire for me too but there are several spits here, though none will be 60" glass like mine. I'm seriously pumped!!!!! gv

Hang on for the Spit, I am going to try and see if I can flatten out the mold a little bit by building a brace for it.
Meanwhile I will get the others done and shipped along with the cores.
Old Oct 08, 2006, 01:36 AM
gavoss is offline
Find More Posts by gavoss
Registered User
gavoss's Avatar
Like I said, no big rush on these. I just WANT them sometime. Get the Spitfire when you can. I'll have plenty of stuff to do in the mean time.

Sounds like I need to order some other cores. My core guy does good work for reasonable pay. If anyone else wants some standard thickness Slope Scale RG 14 modifieds (no undercamber) cores, I'll order as many as needed. I'll guess that $25 shipped will cover everything.

Ray, just let me know when and how you ship so I can be ready for them.

I noticed the F80 and the other Macchi fuses look whiter than mine. I'm guessing one is yellower because it has more glass in it, but what about the other? gv
RCG Plus Member
Old Oct 08, 2006, 01:26 PM
RayH is offline
Find More Posts by RayH
Tuskegee Airmen; My Heros
RayH's Avatar
Quote:
Originally Posted by gavoss
This is SO cool! I'll be the only guy in the midwest with a Macchi and a DC3. Ray is doing a Spitfire for me too but there are several spits here, though none will be 60" glass like mine. I'm seriously pumped!!!!! gv

That is the hardener in the can. No difference what so ever in finished product than color.

Tuesday if I have the cores from Dave I will get your stuff off.
Old Oct 08, 2006, 03:32 PM
gavoss is offline
Find More Posts by gavoss
Registered User
gavoss's Avatar
Sounds fair enough. I have some west system that turns reddish in the small can but it's clear in the quart jug. I work out of the small can and keep the excess in the quart. I talked to Jim Thomas and he says the hardener has lost some strength. Since I'm not carbon/FG over foam bagging wings it's still plenty strong I'm told.

Nauga sent me a photo of his bulldog and my cores, so I'm pumped! gv
RCG Plus Member
Old Oct 09, 2006, 05:56 PM
RayH is offline
Find More Posts by RayH
Tuskegee Airmen; My Heros
RayH's Avatar
Quote:
Originally Posted by gavoss
Sounds fair enough. I have some west system that turns reddish in the small can but it's clear in the quart jug. I work out of the small can and keep the excess in the quart. I talked to Jim Thomas and he says the hardener has lost some strength. Since I'm not carbon/FG over foam bagging wings it's still plenty strong I'm told.

Nauga sent me a photo of his bulldog and my cores, so I'm pumped! gv
Dave called, and dropped off your parts. I will be seaming the bottoms tonight and will look to ship this batch no later than wednesday.
The Spit will come later.
Ray
Old Oct 09, 2006, 06:11 PM
gavoss is offline
Find More Posts by gavoss
Registered User
gavoss's Avatar
You're the MAN Ray! Can you let me know a rough time frame on the Spit? Again, no rush, I would just like an idea of when to expect it.

gv
RCG Plus Member
Old Oct 09, 2006, 06:26 PM
RayH is offline
Find More Posts by RayH
Tuskegee Airmen; My Heros
RayH's Avatar
Quote:
Originally Posted by gavoss
You're the MAN Ray! Can you let me know a rough time frame on the Spit? Again, no rush, I would just like an idea of when to expect it.

gv
GIMME a couple of weeks. I am going to do some test layups before hand.
Ray

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Where do i go to look for RC stuff in SF? Thomas L Electric Plane Talk 10 Jun 12, 2009 12:54 PM
52" B-17 scratch built in progress, assistance/advice requested gbg1 Scale Kit/Scratch Built 73 Nov 03, 2003 09:25 AM
E-flight stuff in Asia RookieOne Electric Plane Talk 9 May 03, 2002 03:10 AM
any electric/slope stuff in ~wilksbarre, PA worth checking out? opualuan Electric Plane Talk 11 Apr 25, 2002 11:31 PM
Decathlon in progress Paul Penney Parkflyers 5 Feb 16, 2002 02:43 PM