Thread Tools
Old Sep 25, 2006, 05:49 AM
pizza.ifly is offline
Find More Posts by pizza.ifly
Good bye, see you in Facebook.
Build Log

My 72" Piper J3 Cub Conversion


Length 1280 mm (50.4in)
Wing Span 1850 mm ( 72.8 in)
Flying Weight 2300g (81.1 oz)

RPM: 8000 (measured)
AMPS: 32A (measured)
WATTS: 370W (measured)

Battery: 3s2p 2200mah *2
Motor: 400 Brushless Motor *2
Prop: APC 13x4 E
Radio: GWS R8SML
ESC: 18A *2
BEC: UBEC 5V
SERVO: PARK *4

flying video
Last edited by pizza.ifly; Oct 03, 2006 at 09:28 AM.
Sign up now
to remove ads between posts
Old Oct 30, 2006, 03:45 AM
pizza.ifly is offline
Find More Posts by pizza.ifly
Good bye, see you in Facebook.
new power module

920KV *2
40A *2
11.1V/2000MAH *2

13* 4 /8800rpm max 56A / 620W
Old Oct 30, 2006, 03:57 AM
pizza.ifly is offline
Find More Posts by pizza.ifly
Good bye, see you in Facebook.
carries with 3CCD video


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion My H9 Piper J3 Cub Conversion Redbeardrc Glow to Electric Conversions 108 May 17, 2016 08:45 PM
Yippee! My latest toy, 1/5th J3 Cub conversion! Zeroaltitude Scale Kit/Scratch Built 28 Jun 16, 2005 11:30 AM
Piper J3 Cub, a GWS Model guapoman2000 Parkflyers 81 Nov 30, 2002 01:51 AM
Yippee! FS: Ready to fly .60 sized "militarized" GP Piper J3 Cub Pilot_Tony Aircraft - Fuel - Airplanes (FS/W) 0 Oct 08, 2002 10:15 PM
Yippee! LIKE NEW Piper J3-Cub deadstk Aircraft - Fuel - Airplanes (FS/W) 0 May 07, 2002 07:55 PM