Ripmax Tiger Moth E-conversion - RC Groups
Shop our Airplanes Products Drone Products Sales
Thread Tools
This thread is privately moderated by GliderGuideMan, who may elect to delete unwanted replies.
Sep 22, 2006, 11:25 AM
Kite flying SCRAPS member
GliderGuideMan's Avatar

Ripmax Tiger Moth E-conversion

OK I have a Blog so I thought it was about time I used it. First off I thought I would document a project I am working on at the moment.

I bought a Ripmax Tiger Moth over 3 years ago. It is a 48" wingspan model suitable for a 25-40 glow engine, mine had an OS40LA installed. I flew this plane a lot and really enjoyed it until the firewall (and attached engine) parted company with the rest of the airframe. Luckily I was taxiing the plane at the time. It would have been an interesting flight if this had happened in the air. The plane was hung up in the hanger and there it lay for a year or more.

Roll on a couple of years. I have a new family and flying time is limited, which means I have less flight damage to repair each week. Having repaired my more recent models I thought it was abaout time to get the Tiger Moth back in the air.

Since hanging the plane up I have gone all electric, and since I needed to build a new firewall anyway (the original was only about 2mm thick!!! and made of a very flexible ply like material) I thought I would convert it to electric. I also fancied making it look a bit different and looked around for an interesting colour scheme.

Lastly, I thought I would add a few details not on the original model, I am not the greatest builder in the World and I am not looking to enter any competitions, but I think the model deserves a few more scale like touches. I will look to add rigging wires and some detail around the cowl and undercarriage etc.

So here goes...

I have stripped the airframe of the original covering - which just shows you how invasive glow fuel is, there was no real indication just how fuel soaked the airframe got.

I have started sanding down the remnants of the original covering and fixed the elevator joiner which literally came apart in my hands as I stripped it down.

I used the original firewall as a template and cut a new one from 1/8" Birchply. I have attached this with Epoxy and used balsa stock and Epoxy and micro balloons to ensure it stays in the front of the airframe.
Sign up now
to remove ads between posts

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Ripmax Tiger Moth + Phasor 30/3 icebear Sport Planes 12 Oct 02, 2003 05:01 PM
Tiger Moth 280 Conversion?? glenclif Parkflyers 18 Jun 30, 2003 10:46 PM
FS: Complete Parkflyer Package (Tiger moth/E-starter/beaver) pc_pilot Aircraft - Electric - Airplanes (FS/W) 4 May 13, 2003 11:17 PM
Does anybody in USA or Canada sell this Ripmax Tiger Moth? Michael in Toronto Electric Plane Talk 0 Apr 14, 2003 11:10 AM
GWS Tiger Moth 280 conversion kdhanson Parkflyers 5 Jul 14, 2001 10:16 AM