Shop our Airplanes Products Drone Products Sales
Thread Tools
Sep 17, 2006, 05:13 PM
Model Builder
Discussion

Low voltage Speed Control???


Are there any electronic speed controls out there that will run at 1.5 to 3 Volts?

Thanks

Allen D.
Sign up now
to remove ads between posts
Sep 19, 2006, 04:08 PM
太刀風
Tachikaze's Avatar
What are you planing on placing it into?
I have been working on the Skippers Launch for the LST 150, which is only 7" long. I picked up a R/C mouse ( like a zipzap car) a real cheap thing. Remove the board in it and I now have a ESC/Reciever for the boat. It runs on one cell, that is charged by two AA cells.
Sep 22, 2006, 05:12 PM
Registered User
wingnut163's Avatar

Esp


allen;
why not use a servo. there you will have the motor and speed control. i put that in a revel long beach tug, 8" long,
Sep 23, 2006, 01:54 PM
Model Builder
A friend has a small fireboat that used to run off one cell battery and I believe it had an old contact type of esc (like a dumas one-but smaller) it no longer works. Will a servo work in reverse as well??
Sep 24, 2006, 08:35 AM
Registered User
wingnut163's Avatar
yes it will work in reverse. you need to do some mods to the servo if you plan on leaving it in the case. most times it is easer to take it apart, then you can put things were you want for space.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Is there a limit on voltage in Speed Control or motor? jhicks Power Systems 1 Feb 05, 2005 09:05 PM
On/Off Speed Controllers w/low voltage cut off??? InTheLift Power Systems 5 Dec 19, 2004 12:43 AM
Question LIPO min voltage and speed control question pumi Power Systems 7 Apr 15, 2004 04:42 PM
Speed control voltage R. Roger Power Systems 2 Oct 30, 2002 01:17 AM
Tech MC-Air 60 speed control Theuns Electric Plane Talk 0 May 29, 2001 02:28 PM