Plan BlingBlingv3 by Didier - Page 2 - RC Groups
Thread Tools
Sep 07, 2006, 02:23 PM
Off playing tug
ChrisBowker's Avatar
awesome!

Chris
Sign up now
to remove ads between posts
Sep 07, 2006, 02:52 PM
Registered User
Thanks for the detailed pics!!
Sep 07, 2006, 05:12 PM
Me likes Depron...
Pjotrrr's Avatar
Smart idea for a straight build:



With the one in prop-er's plans you can build it on a flat surface with only the bottom fuselage part including all the carbon bracing.
The top part of the fuselage comes after that...
Sep 07, 2006, 05:47 PM
Registered User
This is terrific information - thanks. I recently braced a bipe with 1mm carbon cross braces between the wings , and when I tied the braces together with kevlar string , the structure became incredibly rigid. So the wing has no carbon anywhere other than the 1mm cross braces tied together ?

Dorin Luck
Sep 07, 2006, 06:06 PM
Me likes Depron...
Pjotrrr's Avatar
No other carbon needed, just be sure to cover 3/5 of the length of each wing with the crossbrace.
Sep 08, 2006, 03:47 AM
Launchpad McQuack
Prop-er's Avatar
All drawings are back online. Please note that I've drawn downthrust on the vertical fuse. This was a mistake. No downthrust is needed.

All plans have been updated to zero downthrust.
Sep 09, 2006, 04:34 AM
Launchpad McQuack
Prop-er's Avatar
A0 full-size top and side views:
http://www.rcplans.nl/RC%20foto-albu...A0_topview.PDF
http://www.rcplans.nl/RC%20foto-albu...0_sideview.PDF

3-views & perspective view (not to scale !!!)
http://www.rcplans.nl/RC%20foto-albu...s_NO_SCALE.PDF

Top and side views in graphic formats JPG and PNG (for making your airbrush designs...)
http://www.rcplans.nl/RC%20foto-albu...ingBlingV3.png
http://www.rcplans.nl/RC%20foto-albu...ingBlingV3.jpg

Vincent
Sep 09, 2006, 09:29 AM
Senior to who? Member
crossup's Avatar
and the purpose of the holes in control surface outer ends?
Sep 09, 2006, 09:37 AM
Senior to who? Member
crossup's Avatar
think I'll do one of these in 2MM Depron and adding CF ribbon(much lighter than standard rectangular CF spar) on LE,TE and fuse edges ala Ikarus and braces on horizontal/vert stab
Sep 11, 2006, 07:38 AM
Registered User
Quote:
Originally Posted by crossup
and the purpose of the holes in control surface outer ends?
They create vortecies (sp????) that really help to slow the plane by disturbing the air. Great for f3p no so great for 3d.
Sep 11, 2006, 10:13 AM
Launchpad McQuack
Prop-er's Avatar
Logo:

Sep 15, 2006, 09:18 AM
Registered User
too funny! ... thanks for the plans
Sep 29, 2006, 12:24 PM
Registered User
I'm about to finish my Bling. Looks like it will weigh around 4.5 oz. all up. I've always used 2mm carbon for landing gear legs - anybody tried 1.5 carbon on the landing gear? I figure at 4.5 oz. you could get away with the lighter gear.

Dorin Luck
Oct 03, 2006, 03:22 AM
Registered User
Petr Chyska's Avatar
Hello everyone,

This is my first design of F3P-A monoplane. I was inspired by Bling bling. The next one is under construction already. I'm gonna make some little changes at the next one.

Petr
Last edited by Petr Chyska; Oct 03, 2006 at 06:36 AM.
Oct 03, 2006, 09:24 AM
Registered User
3Don's Avatar
Hello Petr,

Looking good, any specs of new plane, how does it fly compared with bipe?
I talk with Dieder and Van Der Vecht's about monoplane vs biplane for indoor flying, and i still believe bipe is better. Anyway these small monoplanes is good solution for guys that flying in small gym.

By the way how you making these small holes on ailerons and elevator?

Are you planing to be in Carvin, who else coming from Czech?

Donatas,


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Free 3D p-40 plan (Autocad) by "Me" hate The Builders Workshop 5 Jul 21, 2005 09:45 PM
FuntanaMini by Didier Pjotrrr 3D Flying 27 Mar 20, 2004 01:41 PM