Thread Tools
Old Sep 07, 2006, 07:49 AM
Pjotrrr is offline
Find More Posts by Pjotrrr
Me likes Depron...
Pjotrrr's Avatar
Download

Plan BlingBlingv3 by Didier


Thanks to Didier to give permission for publishing and Prop-er for his Rhino work to digitalise the plans for this GREAT F3P plane!!!

This plane is designed and flown by Didier in the Dutch and German F3P championships earlier this year.

VERY neutral flying design with almost the same surface area in vertical fuselage and wings, almost no need for rudder in knife edge, great performance in rolling figures.

Recommended AUW is 120-130 grams, best light servo's are the Dymond D47.

Have fun!!!


http://www.rcplans.nl/RC%20foto-albu..._Didier_A0.PDF
http://www.rcplans.nl/RC%20foto-albu...r_A1_Page1.PDF
http://www.rcplans.nl/RC%20foto-albu...r_A1_Page2.PDF
http://www.rcplans.nl/RC%20foto-albu...r_A4_tiled.PDF
http://www.rcplans.nl/RC%20foto-albu...TTER_tiled.PDF

Edit: Here's a pic of Didier's BBv3:

Last edited by Pjotrrr; Sep 07, 2006 at 09:52 AM.
Sign up now
to remove ads between posts
Old Sep 07, 2006, 08:20 AM
matchlessaero is offline
Find More Posts by matchlessaero
Registered User
matchlessaero's Avatar
Any pics of a completed version?
Old Sep 07, 2006, 08:50 AM
Foamy Love is offline
Find More Posts by Foamy Love
Registered User
Thanks for the plans. Some pics would be nice though.
Old Sep 07, 2006, 09:06 AM
Erik Johansson is offline
Find More Posts by Erik Johansson
Registered User
Here is a link to a recent thread about this design:

https://www.rcgroups.com/forums/showthread.php?t=563873

/Erik
Old Sep 07, 2006, 09:49 AM
Pjotrrr is offline
Find More Posts by Pjotrrr
Me likes Depron...
Pjotrrr's Avatar
This is Didier's model:



And here you can see Didier flying it at the Open German F3P Championships:





Data F3P planes:



The Open German F3P Championship can be seen as the 'unofficial European championship'.....

Aito, Smove and Snowflakes are biplanes, all others are monoplanes.

Strecker motoren: www.rs-e-motoren.de
Flyware Micro Rex: www.lipoly.com
WES carbon props: www.wes-technik.de
Last edited by Pjotrrr; Sep 07, 2006 at 10:46 AM.
Old Sep 07, 2006, 10:31 AM
Trisquire is offline
Find More Posts by Trisquire
Intermediate Multi
Trisquire's Avatar
Quote:
Originally Posted by Bert v/d Vecht
The 11 gram Strecker motor (195 03) comes in two winds. The 96 wind is for 3s packs and the 74 wind is for 2s packs. Performance is similar, as is the system weight since the 2s batteries need to be capable of a higher current draw than the 3s batteries.
All BlingBlings are all flown with a 96 wind Strecker 195 03?

Tom
Old Sep 07, 2006, 10:35 AM
Pjotrrr is offline
Find More Posts by Pjotrrr
Me likes Depron...
Pjotrrr's Avatar
Yes, all three used also 3s300 lipo's...
I see the 96 wind is not mentioned on the website, can be ordered though...
Old Sep 07, 2006, 10:38 AM
3dflyindan is offline
Find More Posts by 3dflyindan
PB #2212
i no this may seem stupid but why did they use 3 cells ? most people ive heard are using 2cellls ??

dan
Old Sep 07, 2006, 10:41 AM
Pjotrrr is offline
Find More Posts by Pjotrrr
Me likes Depron...
Pjotrrr's Avatar
They chose for less Amps/more Volts
The 3spacks could be at the same weight as other used 2spacks because of the less Amps draw....
Old Sep 07, 2006, 11:23 AM
Bert v/d Vecht is offline
Find More Posts by Bert v/d Vecht
Registered User
The Data was collected at the qualifier (North) for the German open indoor champs.

After that contest I changed to Didier's new V3 design and used that plane in the finals. The change was dramatic! At the qualifier I just barely made the finals with only 1 place to spare. (9th position of 10 spots to go trough to the final.)

In the finals I used the V3 design to improve to 5th place in a field that comprised the 10 best pilots from the North and the 10 best pilots from the Southern German qualifier.

I feel the V3 design contributed to the improvement. My V3 used the 2cell 74wind motor and 2s Etec 450 lipo's.

Here is a video of one of the rounds in the final.
http://airtoimedia.nl/web/upload/vdV...-Bert-Esch.wmv

As you can see I used a more rounded nose for esthetic reasons only.
Last edited by Bert v/d Vecht; Sep 07, 2006 at 02:10 PM.
Old Sep 07, 2006, 12:35 PM
Foamy Love is offline
Find More Posts by Foamy Love
Registered User
Nice flying. I always love watching a good F3P flight.
Old Sep 07, 2006, 01:14 PM
Prop-er is online now
Find More Posts by Prop-er
Launchpad McQuack
Prop-er's Avatar
Right...The scaling of the A0 and A1 sized plans is incorrect. I have taken these plans OFFLINE, and will fix them tomorrow morning. (I don't have acces to the model right now...GRRRR).

Sorry for the inconvience.
Old Sep 07, 2006, 01:41 PM
Jerry Combs is offline
Find More Posts by Jerry Combs
is it flying time?
Jerry Combs's Avatar
Prop-er,

No need to be sorry. I appreciate your taking the time and effort to do this. Thank you Didier for making your design available.

Jerry
Old Sep 07, 2006, 01:43 PM
dorjes is offline
Find More Posts by dorjes
Registered User
What kind of bracing is being used on the plane ? Looks like some carbon bracing underneath the fuselage , and maybe some kevlar or monofiliment on the tail , but I'm not sure about the wing bracing . Anyone have info or have a picture underneath to show the bracing ?

This looks like a really nice design.

Thanks, Dorin Luck
Old Sep 07, 2006, 02:13 PM
Pjotrrr is offline
Find More Posts by Pjotrrr
Me likes Depron...
Pjotrrr's Avatar
Here are two pictures of my 63cm span model based on the BBv3, this model uses an 8 gram Strecker motor and a 17 grams 2s300 lipo.
Lightened D47's directly soldered to lightened RX and a CC Phoenix 10 with lighter shorter cables.
The crossbracing under the wings is 1mm carbon, bracing of the tail can be done with 0,5mm carbon.
The center of the cross under the wing is connected with a standing rod to the wing.
Dick and Bert van der Vecht came with this light and torsionfree solution...
And yes, we have red 3mm depron over here, it's sold by Graupner
Last edited by Pjotrrr; Sep 07, 2006 at 02:18 PM.


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Free 3D p-40 plan (Autocad) by "Me" hate The Builders Workshop 5 Jul 21, 2005 09:45 PM
FuntanaMini by Didier Pjotrrr 3D Flying 27 Mar 20, 2004 01:41 PM