Thread Tools
Old Dec 02, 2006, 04:21 PM
scratchandbash is offline
Find More Posts by scratchandbash
Suspended Account
scratchandbash's Avatar
Now they just released my favorite, the DIIV. I have to stay away from the HS, as I like both of these planes.

Bill
Sign up now
to remove ads between posts
Old Dec 02, 2006, 04:27 PM
pda4you is offline
Find More Posts by pda4you
Registered User
pda4you's Avatar
JTech - see the other thread....

Mike
Old Dec 02, 2006, 04:48 PM
claybuster is offline
Find More Posts by claybuster
Electricholics Anonymous
claybuster's Avatar
Bill,
I have both planes and so do a few of the other guys. I say go for it and get both
Mike
Old Dec 02, 2006, 04:50 PM
claybuster is offline
Find More Posts by claybuster
Electricholics Anonymous
claybuster's Avatar
Thanks again Mike! I saw the other thread.
Mike
Old Dec 05, 2006, 07:04 AM
saucerguy is offline
Find More Posts by saucerguy
Registered User
saucerguy's Avatar

costs


......................
Last edited by saucerguy; Jan 06, 2007 at 09:54 AM.
Old Dec 05, 2006, 08:08 AM
Michael Heer is offline
Find More Posts by Michael Heer
Registered User
Michael Heer's Avatar
The SE5a is being sold by Tower Hobbies for $89.99 currently and is expected to be back in stock "Early December."
I liked mine so much I bought a second one for use in a short movie we plan to make. I was buying $65.00 worth of stuff I needed from Tower and adding the plane brought me over $150.00 so I got a nice discount and free shipping at that time so the 2nd plane only cost me out of pocket about $62.00. The Rimfire motor was just under $45.00 and it works great in the plane.
RCG Plus Member
Old Dec 26, 2006, 10:57 AM
sokrdz is offline
Find More Posts by sokrdz
Registered User
sokrdz's Avatar

what glue?


hi everyone i just got this plane for christmas! I was wondering if i could use 5 min epoxy instead of CA glue. I am not sure if it will freeze up the hinges to the alerions or what. Or should i just go ahead and buy CA glue?
thanks michael
Old Dec 26, 2006, 11:34 AM
claybuster is offline
Find More Posts by claybuster
Electricholics Anonymous
claybuster's Avatar
The epoxy is too thick. Go get some ca.
Mike
Old Dec 27, 2006, 09:30 AM
ElectRick is offline
Find More Posts by ElectRick
Eye Drather Beef Lying
ElectRick's Avatar
CA is probably best, but I've read that some people have good luck with plain old white glue or PVA canopy glue on small CA hinges. It sure would be easier to clean up any squeeze out. One drawback to CA on CA hinges is that it makes the point where they bend stiff and brittle.

I've never tried it myself, but it sounds like it should work. We're not talking about a lot of strength needed to hold the hinges in.

Rick
Old Dec 28, 2006, 10:17 PM
sokrdz is offline
Find More Posts by sokrdz
Registered User
sokrdz's Avatar

tips


hi again, almost finish with the plane very easy to build just have been building on and off for the past couple of days. Just wondering does anyone have any tips for me so i dont crash this nice plane?
thanks
michael
Old Dec 28, 2006, 10:35 PM
space ghost is offline
Find More Posts by space ghost
Registered User
Its a good honest airplane. I had no problems on the maiden flight. Keep it on low rates for the first flight just to get used to it. Keep a little power on for landing so it doesn't flip over. The Se5 is my favorite electric plane now because it flys so good & looks so good doing it.
Old Dec 29, 2006, 09:26 AM
sokrdz is offline
Find More Posts by sokrdz
Registered User
sokrdz's Avatar
that means put the control rods in the second hole on the control horn right?

sry still kind of a newb
Old Dec 29, 2006, 11:15 AM
TopSpin is offline
Find More Posts by TopSpin
Suspended Account
I just started on the one I got for Christmas and expect to have it done in a few days. Thanks to all that posted here, I learned a lot and got a lot of great tips and information.

Wish me luck..
Old Dec 31, 2006, 07:24 PM
Solid Hit is offline
Find More Posts by Solid Hit
Just call me .... Bill
Solid Hit's Avatar
I'm just finishing up mine. How did you connect the top and bottom ailerons? It seems that the "L" wire goes in the top and the "z" wire in the bottom then use the heat shrink when they are correctly aligned. Sound right?
Old Jan 02, 2007, 04:15 PM
Michael Heer is offline
Find More Posts by Michael Heer
Registered User
Michael Heer's Avatar
The wheels are three inches.

The covering is not Monocoat but the closest covering you can buy is Monocoat. Olive and Creme are the colors for the SE5a and Missle Red, black and white for the Fokker D VII.
RCG Plus Member


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Wanted Great Planes S.E. 5a WWI ARF rz22g Aircraft - Electric - Airplanes (FS/W) 4 Apr 23, 2007 01:00 AM
Sold Great Planes ElectriFly S.E.5a WWI biplane LRHann Aircraft - Electric - Airplanes (FS/W) 1 Mar 05, 2007 07:11 PM
Found Great Planes ElectriFly S.E.5a ASAMech Aircraft - Electric - Airplanes (FS/W) 0 Feb 23, 2007 07:40 PM
Alert S.E.5a WWI arf in stock towwer hobbies yamakawazuki Electric Warbirds 3 Oct 23, 2006 06:47 PM
New Product Great Planes S.E.5a WWI EP ARF P-51C Electric Warbirds 6 Jul 13, 2006 04:20 PM