New Products Flash Sale
Thread Tools
Old Mar 19, 2008, 10:32 PM
Erick88 is offline
Find More Posts by Erick88
Registered User
Quote:
Originally Posted by GryphonRCU
Erick88,

Can you please tell me how long the motor worked for you?

And if you ever took reading of any type from that motor.

What did you normally run for battery and prop?

So what lead to the motor smoking?
I'm only asking this so I can take it into account for future recommendations.

Ever changed the replaceable brushes on that brushed Graupner 6304L motor that Hobby-Lobby sells for $29?

I would appreciate whatever you remember, and feel free to PM me instead of a post if you prefer.

__________

Personally on 2 occasions I took a fairly new stock 480 brushed motor and figured out what it took to smoke it on 3S.


Later,

Gryph
I only flew it three times--long story short, it was just when I was starting out in the hobby and was in a hurry to do everything. SO, the first flight I tried to put a heat sink on the stock (parkzone) ESC/Rx and somehow messed it up such that I lost signal and crashed after barely getting off the ground. Next, I connected the servos and new ESC to my shiny new DX6 (backwards--e.g. controls reversed) and of course crashed. Next time--just prior to launch I forgot the golden rule of radio on first and then plug in the battery..and *puff* went the magic smoke (prop was blocked by asphalt and thus, could not spin). After which I still launched it but it didn't fly much better than the stock 480 of course. SO, sorry to say I basically have no information to give you.

However, with the low cost of brushless motors and ESC's now I don't see why anyone would want to bother with brushed motors anymore! I decided to buy the mega and a 25 amp ESC from someone for $80 total and have never looked back. Bought a new fuse and gorilla glued 3/8" balsa stock to each trailing edge and sanded down flush with the wing surface. That allowed me to mount balsa elevons with dubro hinges--MUCH better than the stock set-up. Probably only about 40 or so flights on her and she can be pushed much harder. 4S will likely be the limit of my comfort zone--and cubicle dweller eyesight!!
Sign up now
to remove ads between posts
Old Mar 19, 2008, 11:13 PM
gotboostedvr6 is online now
Find More Posts by gotboostedvr6
zoom zoom
gotboostedvr6's Avatar
Quote:
Originally Posted by brian94066
are you sure that's a stryker?

cuz it sure doesnt look like 1

I'm sure... and its been through like 15 crashes where i needed glue to fix it

this build will be the last tho next step is trash
RCG Plus Member
Old Mar 19, 2008, 11:51 PM
brian94066 is offline
Find More Posts by brian94066
VBARRRR
brian94066's Avatar
Quote:
Originally Posted by gotboostedvr6
I'm sure... and its been through like 15 crashes where i needed glue to fix it

this build will be the last tho next step is trash
so that is like an experimental airframe

your next one will be prettier?
Old Mar 20, 2008, 12:18 AM
gotboostedvr6 is online now
Find More Posts by gotboostedvr6
zoom zoom
gotboostedvr6's Avatar
I just finished painting it... looks good imo

and no I dont do purdy
RCG Plus Member
Old Mar 20, 2008, 01:03 AM
brian94066 is offline
Find More Posts by brian94066
VBARRRR
brian94066's Avatar
Quote:
Originally Posted by gotboostedvr6
I just finished painting it... looks good imo

and no I dont do purdy
xD

better to have a great flying tank then a caged unicorn
Old Mar 20, 2008, 01:26 AM
GryphonRCU is offline
Find More Posts by GryphonRCU
Registered User
GryphonRCU's Avatar
Does 53 o.z. with possible battery onboard count as a tank?

Wish me luck for possible maiden this weekend.

I got my batteries and ESC back in my hand. All soldered up and cycled.

Got rid of Dean Ultra Connectors so I can flow more amps.

10 o.z. increase over last build is a big step and I'm nervous.


I will post pictures of crash site or something more positive in a few days.


Gryph
Old Mar 20, 2008, 01:29 AM
glucoseboy is offline
Find More Posts by glucoseboy
Registered User
glucoseboy's Avatar
Quote:
Originally Posted by GryphonRCU
Does 53 o.z. with possible battery onboard count as a tank?

Gryph
Tank. good luck with your maiden.
Old Mar 20, 2008, 02:59 AM
gotboostedvr6 is online now
Find More Posts by gotboostedvr6
zoom zoom
gotboostedvr6's Avatar
Some finished pics...



RCG Plus Member
Old Mar 20, 2008, 05:38 AM
JWilliams2 is offline
Find More Posts by JWilliams2
Registered User
JWilliams2's Avatar
Quote:
Originally Posted by GryphonRCU
Does 53 o.z. with possible battery onboard count as a tank?

Wish me luck for possible maiden this weekend.

I got my batteries and ESC back in my hand. All soldered up and cycled.

Got rid of Dean Ultra Connectors so I can flow more amps.

10 o.z. increase over last build is a big step and I'm nervous.


I will post pictures of crash site or something more positive in a few days.


Gryph
What the heck have you done to it to make it weigh that much? 10S 5000 pack?
Old Mar 20, 2008, 06:22 AM
I.C.O.N. is offline
Find More Posts by I.C.O.N.
Registered User
I.C.O.N.'s Avatar
Quote:
Originally Posted by JWilliams2
What the heck have you done to it to make it weigh that much? 10S 5000 pack?
I am guessing 5S 5000.
Old Mar 20, 2008, 12:58 PM
gotboostedvr6 is online now
Find More Posts by gotboostedvr6
zoom zoom
gotboostedvr6's Avatar
53 oz stryker?
if it is what a waste of time
RCG Plus Member
Old Mar 20, 2008, 01:19 PM
I.C.O.N. is offline
Find More Posts by I.C.O.N.
Registered User
I.C.O.N.'s Avatar
Quote:
Originally Posted by gotboostedvr6
53 oz stryker?
if it is what a waste of time

It's all in fun. Some like to slim down as you have done and some like to Beef up like Gryphon does.

Adding MORE POWER is never a waste of time in my book.
Old Mar 20, 2008, 01:33 PM
gotboostedvr6 is online now
Find More Posts by gotboostedvr6
zoom zoom
gotboostedvr6's Avatar
What i mean is no matter how much power you put in that airframe you still hit a brick wall. There are way better options out there such as a 40-48 inch wing, it would be waaaaay faster, even a FJ would be a better option..

To each his own, I wish it luck on the maiden..
RCG Plus Member
Old Mar 20, 2008, 01:35 PM
JWilliams2 is offline
Find More Posts by JWilliams2
Registered User
JWilliams2's Avatar
Quote:
Originally Posted by gotboostedvr6
What i mean is no matter how much power you put in that airframe you still hit a brick wall. There are way better options out there such as a 40-48 inch wing, it would be waaaaay faster, even a FJ would be a better option..
Diminishing gains, but you'll never hit a wall with it. If the thing really weighs 53oz I shudder at the watts pushing it through the air I want to see pics and more importantly I want to see how a person launches a 53 oz stryker, although I suppose it may have enough juice for a near vertical launch. Landings are probably fun, though.
Old Mar 20, 2008, 01:43 PM
finster is offline
Find More Posts by finster
Registered User
finster's Avatar
Hey Gryphon, glad to see you made it to rcgroups...When I was reading up on your last build...I thought to myself, this thing is gonna be the fastest stryker ever or its gonna crash and burn...After seeing the pics couple pages later I was awe shocked! Did you ever find out what caused it?

Once it gets warmer here Im gonna make a micro-stryker...Basicly the front of the microjet replacing the front of stryker...bumped into a link where someone did it and it looked 2kool...


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Parkzone F-27C Stryker That can fly?!? Parkflyers 109 Sep 26, 2012 11:54 PM
Discussion Parkzone's New F-27C Stryker itspat Parkflyers 1 Nov 08, 2011 08:56 PM
Mini-Review F-27C Stryker Review That can fly?!? Parkflyers 27 Jul 29, 2010 09:25 PM
Discussion Parkzone F-27C Stryker 3S 11.1 V Balance Plug WDP Batteries and Chargers 12 Oct 26, 2009 09:44 AM
Discussion Coming soon! F-27C Stryker RTF with lipo and brushless Solcat Electric Plane Talk 0 May 31, 2006 01:34 PM