Thread Tools
Old Aug 23, 2006, 11:51 AM
sbrv24 is offline
Find More Posts by sbrv24
Registered User
Question

List of Tools needed for setting up my work bench


Hi ,
I want to set up a home based work station to build R C models from Balsa kits and also build car from available Kits .
It would be great if I get a list of essential tools including glues etc .
It would be better still if the requirement for electric models could also be included .
Sign up now
to remove ads between posts
Old Aug 23, 2006, 12:48 PM
spitfire123 is offline
Find More Posts by spitfire123
jimi hendrix
GLUES:
arolddite.
epoxy.
super glue.
pva glue.

TOOLS:
pozzy drive.
flat hand screwdriver.
needle nosed plyers.
tweezers.
ect.......

welcome to rc groups.
Old Aug 23, 2006, 01:24 PM
Mendnwngs is offline
Find More Posts by Mendnwngs
Firebreather
Mendnwngs's Avatar
Soldering iron, good hex drivers (both SAE, and metric) X-acto handles, and tons of #11 blades, razor saw, couple sanding blocks, diag. cutters, modelers miter-box, small bar clamps, clothespins... Theres tons of stuff that are really nice to have, but the bare essentials would be, cutting, sanding, gluing, clamping, drilling, and covering tools.

For glues, I mostly use Thin, and medium CA, 5 and 30 minute epoxy, PVA glue (Elmers, Gorilla glue, et al.) and foamsafe CA.

FWIW, I would suggest getting the bare minimum first off, then buy tools individually as you need them for projects. You'll find that you'll pretty quickly amass a nice selection of tools.

-Jason
Old Aug 23, 2006, 01:28 PM
TangoUniform is offline
Find More Posts by TangoUniform
Registered User
TangoUniform's Avatar
dremel tool, digital calipers, shop magnet and a nice lighting setup!
Old Aug 23, 2006, 02:47 PM
spitfire123 is offline
Find More Posts by spitfire123
jimi hendrix
so basicly..................

EVERYTHING
Old Aug 23, 2006, 04:18 PM
TangoUniform is offline
Find More Posts by TangoUniform
Registered User
TangoUniform's Avatar
Not everything, just everything that won't give your wife an excuse to invade your hobby space
Old Aug 23, 2006, 04:45 PM
Viper Pilot is offline
Find More Posts by Viper Pilot
God is good
Viper Pilot's Avatar
A good 90 degree square, t-pins, clamps, balsa stripper, rulers, cutting board, and a good fan in addition to the above.
Old Aug 23, 2006, 09:17 PM
sbrv24 is offline
Find More Posts by sbrv24
Registered User
Thanks a lot I am updating a common list from all your replies .
So pls keep the suggestions coming .
I guess a multi meter might also be required , would a standard market one do or would it be better to have one with battery leads
Old Aug 24, 2006, 08:23 AM
spitfire123 is offline
Find More Posts by spitfire123
jimi hendrix
Quote:
Originally Posted by TangoUniform
Not everything, just everything that won't give your wife an excuse to invade your hobby space

LOL
Old Aug 28, 2006, 06:58 PM
Maineiac63 is offline
Find More Posts by Maineiac63
Registered User
Maineiac63's Avatar
Organization !! In ten years don't let anyone in your shop to touch stuff or you won't be able to find anything. LOL
Old Aug 28, 2006, 07:30 PM
spitfire123 is offline
Find More Posts by spitfire123
jimi hendrix
Quote:
Originally Posted by Maineiac63
Organization !! In ten years don't let anyone in your shop to touch stuff or you won't be able to find anything. LOL


i dont,
i still cant find anything

m gettin a massive shed soon just for me!

will take pics when it arives!(4 weks)

cant wait
Old Aug 28, 2006, 10:57 PM
ctdahle is offline
Find More Posts by ctdahle
Flying RC since 1974
I wrote this a few years B.K. (Before Kids, when I had a whole spare bedroom for my model shop) but I think it's still pretty good advice. See the article at http://webpages.charter.net/rcfu/Beg...cWorkshop.html
Old Aug 29, 2006, 09:38 AM
sbrv24 is offline
Find More Posts by sbrv24
Registered User
Thanks a lot ,your article starts bang on with my problem that is that looking at the kit I get awed and dont think I can build so I depend on others .
I guess your note now has got me charged up to go it on my own
Thanks a ton once again


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
What can I use for my work bench underlay to put pins into? ontheweekend The Builders Workshop 26 Sep 17, 2006 01:33 AM
Alert Help Needed Setting Up My First CP Heli! Also, Questions On Hitec Eclipse 7...! Minimole Micro Helis 55 Aug 25, 2005 09:19 PM
Yippee! Thanks Like90, GWS, and Forums for setting up my Modified HB Clone. KidNovak Micro Helis 5 Mar 27, 2005 12:02 AM
Advise for setting up my dual BL Feigao DF EDF40's LexTalionis Power Systems 1 Oct 26, 2004 04:47 PM
Setting up my second Adrenalin, some questions... Erik Johansson High Performance 0 Jul 01, 2001 05:45 PM