Eagle Tree RPM sensor placement
Does anyone use the magnetic RPM sensor from eagletree? Any pics of sensor placement?
I have one mounted (works fantastic by the way) on the aluminum piece that holds the top main shaft bearing and the magnet mounted in the mast collar. The problem I'm having is that since I chaged to hs-65's I've had to setup my head again and I'm only getting +/- 9 degrees because the washout block hits the main head if I increase the swash % any more.
I know I need to tighten the links on the swash to bring it down, but any further down and I will get an interaction with the rpm sensor! The thing that bothers me is that I've had full +/-10 degrees pitch with the hs-56's and RPM sensor, now I cant get it, what gives??
Trex 450SE V2
cc35/medusa 34-28-3400 3s tp2100
Put the magnet on the main gear.
It's easier on a Logo but do-able on the Rex. Look at the top gear. You could
slightly embed it in one of the spokes just before the plastic gets thicker near
the tooth ring. You may have to clearance the frame for the magnet.
I then goop the sensor to the frame.
Mine is the earlier plastic frame, yours may be different.
|Category||Thread||Thread Starter||Forum||Replies||Last Post|
|Discussion||Brushless RPM Sensor/Tach from Eagle Tree Systems, LLC||billpa||Eagle Tree Systems||57||Apr 24, 2009 10:19 AM|
|Discussion||Brushless RPM Sensor/Tach from Eagle Tree Systems, LLC||billpa||Product Announcements||13||Dec 28, 2006 03:50 PM|
|Article||Eagle Tree Products GPS Expansion Module & RPM Optic Sensor||Michael Heer||Power Systems||4||Sep 12, 2006 12:19 PM|
|Discussion||Eagle tree magnet mount for rpm sensor||Jasonscott||Mini Helis||0||Mar 18, 2006 12:10 PM|
|Multiple RPM Sensor Support from Eagle Tree Systems, LLC||Dave Lauck||Product Announcements||1||Nov 09, 2005 12:39 AM|