Shop our Airplanes Products Drone Products Sales
Thread Tools
Old May 22, 2001, 09:37 AM
Ron van Sommeren is offline
Find More Posts by Ron van Sommeren
homo ludens modellisticus
Ron van Sommeren's Avatar

homebuilt controller for brushless motors


Gentlemen,

Start your soldering iron :-)

DIY brushless controller: http://www.geocities.com/SouthBeach/...2/speedybl.htm (English/German)
Discussion threads, not at full speed yet: http://www.rconline.net/k-forum/Forum3/HTML/003226.html

Regards,

Ron van Sommeren, the Netherlands
10th international Cumulus E-fly-in
Nijmegen/Winssen, the Netherlands
September 2nd 2001

[This message has been edited by Ron van Sommeren (edited 05-23-2001).]
Sign up now
to remove ads between posts
Old May 22, 2001, 06:22 PM
Graham Stabler is offline
Find More Posts by Graham Stabler
Sticky Shepherd
Graham Stabler's Avatar
WOW, and with all the talk of home built brushless motors I'm getting tempted. Some might find the soldering a little on the tricky side though. I keep thinking about the possibility of minature versions for the slowfly scene. I've got some nice neo disk magnets, could be interesting.
Old May 22, 2001, 06:27 PM
Ron van Sommeren is offline
Find More Posts by Ron van Sommeren
homo ludens modellisticus
Ron van Sommeren's Avatar
I love the smell of soldering resin in the morning :-)

Ron van Sommeren, the Netherlands
10th international Cumulus E-fly-in, Nijmegen/Winssen, September 2nd

Old May 22, 2001, 06:59 PM
PropBreaker is offline
Find More Posts by PropBreaker
Registered User
Well... this might be useful to people that do speak German (I think thats what it is...) But since this is an English text forum... it would be appropriate to have a translation of the text available for the people who come to the forum.

I'm not saying speak English or nothing... I'm saying that this forum caters to those who do speak, read, write English. If this were a forum for people that speak, read, write French... then a French translation would be appropriate.
Old May 22, 2001, 07:14 PM
davidfee is online now
Find More Posts by davidfee
Registered User
davidfee's Avatar
PropBreaker, go here:
DIY brushless controller: http://www.geocities.com/SouthBeach/...2/speedybl.htm
...and click on the British flag... it's there to take you to the English version of the page.
Old May 23, 2001, 04:11 AM
Ron van Sommeren is offline
Find More Posts by Ron van Sommeren
homo ludens modellisticus
Ron van Sommeren's Avatar
Hi PropBreaker,

Firstly, it's a service. You're free to ignore it, it's only a link, not a huge post.
Secondly, there are enough people in this forum who can at least read (quite) a bit of German: UK's, Scandinavians, Germans, Swiss, Austrians and last but not least the Dutch, famous for their modesty ;-) .
Thirdly, I think it may be an important breakthrough for electric flight, just like the diy torquemax/lrk/brushless outrunners I did some posts about. Important enough to share this knowledge trans-atlantic/trans-channel/trans-pacific/trans-whatever-barrier-there-may-be. Isn't that what the internet is all about?

Maybe, in a few months, you'll see in this forum a enthusiastic report or translation from e.g. Graham above, stating he uses this diy controller, it's a beauty, he loves it, he wants to marry it, he wants to have children and hey, if you need help building it, contact him.

But you do have a point too, in future I will mention the language more clearly.

For those of you who cannot read German you may find this helpfull: http://babelfish.altavista.com/translate.dyn
It does not translate perfectly, but it is good enough to help you out. Just copy/paste the addresses above into the website field, select German to English and away you go. (Thanks for the link MrBungle)

Regards,

Ron van Sommeren, the Netherlands

10th international Cumulus E-fly-in, in Dutch, English, German, French and soon in Spanish ;-)
Nijmegen/Winssen, the Netherlands
September 2nd 2001

[This message has been edited by Ron van Sommeren (edited 05-23-2001).]
Old May 23, 2001, 09:26 AM
Ron van Sommeren is offline
Find More Posts by Ron van Sommeren
homo ludens modellisticus
Ron van Sommeren's Avatar
And ...,

Fourthly, it's not a link to a site of my own.
Fifthly, it does have an English version! As I wrote directly after the link!

Regards,

Ron van Sommeren
10th international Cumulus E-fly-in
Nijmegen/Winssen, the Netherlands
September 2nd

[This message has been edited by Ron van Sommeren (edited 06-01-2001).]
Old Jun 01, 2001, 12:49 PM
Ron van Sommeren is offline
Find More Posts by Ron van Sommeren
homo ludens modellisticus
Ron van Sommeren's Avatar
And Propbreaker,

With a name like Huber (fnhuber@..) there are bound to be some traces left of the old German language in your genes Or is my assumption about your origins wrong?

regards,

Ron van sommeren, the Netherlands
10th international Cumulus E-fly-in
Nijmegen/Winssen, the Netherlands
September 2nd


[This message has been edited by Ron van Sommeren (edited 06-01-2001).]
Old Jun 01, 2001, 05:39 PM
Robert Parisot is offline
Find More Posts by Robert Parisot
Registered User
You gotta love this place....
Old Jun 01, 2001, 08:04 PM
fisher is offline
Find More Posts by fisher
Registered User
Anyone know what the exchange rate right now? How much is 140 DM in USD? Is he taking international orders?
-fish<-- German heritage and h.s. German language failure
Old Jun 01, 2001, 08:25 PM
sf_247 is offline
Find More Posts by sf_247
Registered User
Quote:
Originally posted by fisher:
Anyone know what the exchange rate right now? How much is 140 DM in USD? Is he taking international orders?
-fish<-- German heritage and h.s. German language failure
I figured that was marine heritage. Wouldn't it be fisch???
Anyway, today's exchange rate (6/1/01) was about 2.31 to the dollar, so 140/2.31 = $60.61 US Dollars and 50/2.31 = $21.65 US Dollars.

Shawn
Eflightpower.com
Old Jun 01, 2001, 09:06 PM
fisher is offline
Find More Posts by fisher
Registered User
Thanks homeboy


(Ja, german brown trout )
Old Jun 02, 2001, 02:44 PM
jberg is offline
Find More Posts by jberg
Registered User
jberg's Avatar
Hi,

perhaps you dont know that "brown trout" is a joke in German. There are "blue trout" which is a trout that is treated with vinegar while cooking and becomes blue. Then there is "trout a la miller's wife" which is a fried/baked trout. "brown trout" (Forelle braun) is german slang for a fried *herring*

Ok, slightly off-topic!

Regards, Jochen

[This message has been edited by jberg (edited 06-02-2001).]
Old Jun 03, 2001, 02:31 AM
fisher is offline
Find More Posts by fisher
Registered User


My nick fisher is not my name. I use it because my other passion is fishing. We have 2 kind of salmo trutta transplanted here(Texas) Loch Laven and German. That was the Brown Trout I referred to… thanks for the lesson though..(My heritage my be questionable … be not THAT questionable) ~~~~~~~~~~
see…
…I told you I flunked German.

-fish<--not a red herring! fried or otherwise


[This message has been edited by fisher (edited 06-03-2001).]


Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Hi amp speed controller for brushless motors reinhoud Electric Ducted Fan Jet Talk 1 Sep 06, 2004 06:58 PM
USA source for brushless motors... ben1000 Electric Heli Talk 2 Feb 11, 2002 09:21 AM
CSD Twister (Carbon Model for brushless motors) jsc Aircraft - Electric - Airplanes (FS/W) 1 Oct 29, 2001 07:29 PM
Proper care for brushless motors?? rcastab Power Systems 4 Oct 08, 2001 09:47 AM
dual controller for brushless François Power Systems 5 Jul 15, 2001 04:57 PM