F3P plans - Page 17 - RC Groups
Thread Tools
This thread is privately moderated by Aio_1, who may elect to delete unwanted replies.
Aug 11, 2010, 07:17 AM
Registered User
Yeah, man, thanx. I thought about it so, but besides itīs a bipe the wing is not straight, its LE is swept back. So, the one third cord from LE (I think you meant one third, didnīt you?) would make a very fwd CG. Thatīs why Iīm asking if someone has some flying time in this plane and would suggest a CG. Thanx again!
Sign up now
to remove ads between posts
Sep 27, 2010, 04:41 AM
Registered User
allen_g30's Avatar
I finished morback. is a super model. attached, who is interested in plans for cutting and CNC milling

Now I'm interested to know where your CG is exactly in this model. I have not flown yet. after the calculated CG-site should be between 90 and 96 mm from leading edge
Oct 04, 2010, 10:50 AM
Oct 08, 2010, 03:22 AM
Registered User
ultralajt's Avatar
WOW! Cool paintjob!
Oct 09, 2010, 06:29 AM
Registered User
mdauth's Avatar
I cut out all the plans and looking at making it with 3mm EPP foam seems a bit to week. What thickness of EPP did you use. Thanks
Oct 09, 2010, 02:33 PM
Registered User
allen_g30's Avatar
I made a pattern inspired by the v3 Deluxe Donuts
Oct 11, 2010, 11:16 AM
Registered User

building thread for morback

does anyone knows someone that has a building thread for the morback or instructions to build this plane.
Thank you in advance
Oct 13, 2010, 02:47 PM
Registered User
does anybody now wat the diffrence is between a pitch prop type A and pitch prop type B
Oct 13, 2010, 02:56 PM
Registered User
i have just bought a nipple 4d and i was wondering if anybody new wat type of pitch prop and motor i needed for 4d flying
Nov 23, 2010, 02:00 PM
The balance is the answer
Last edited by Estoner; Nov 23, 2010 at 02:54 PM.
Nov 25, 2010, 12:54 PM
Registered User
Which software do you use for your plans? Is the paint made with same software?
Dec 02, 2010, 09:52 AM
Registered User
Aio 1,
F6Bert has posted a great set of plans for his Xtra 300. You may want to add them to the sticky. His plane is on my build list for sure.
Dec 02, 2010, 12:13 PM
Registered User
Here they are!

And this is the thread
Dec 18, 2010, 05:54 PM
Registered User
I haven't seen much in these threads about airfoil wing on the am planes but have heard about it how do you do that sanding, shaping ect. ?
Dec 19, 2010, 03:58 AM
Inspired by the wings of an An
Andycap's Avatar
Gernot Bruckman is one of the few who used an airfoil wing, ith his HEPF Yak.

Its hot wire cut from polystyrene block. Martin Muller used to use airfoil wings but says the best section for indoor aerobatics is the flat plate wing

Thread Tools

Similar Threads
Category Thread Thread Starter Forum Replies Last Post
Discussion Depron F3P Plans please, can you Help? Jiffy Indoor Pattern/F3P 18 Aug 21, 2006 12:16 AM